Question about 1989 Ford Crown Victoria

1 Answer

How to install front brakes on 89 Crown Vic - 1989 Ford Crown Victoria

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Loosen lug nuts. jack car up. Take wheel off. take the 2 bolts out of caliber. then remove the caliber from rotor and then remove the brake pads. push back piston with piston pushing tool. insert new brakes into caliber and return the caliber onto the rotor. put the 2 bolts back in and return wheel by tightining in a star order and you are now ready to roll

Posted on Sep 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install kill switch 89 crown vic


Did you already Google this one? looks to me lots of owners did post about this. I do not understand enough to help you, but please use the words in Google and see what comes up.

Jan 04, 2015 | Ford Cars & Trucks

1 Answer

What kind of brakes do i have on my 1982 ford crown vic


not sure what your asking here. front brakes are disc brakes and the rear are drum brakes and are hydraulic brakes that use dot 3 brake fluid. they should be power brakes as very few were sold as manual brakes.

Aug 28, 2014 | Cars & Trucks

1 Answer

Where is brake light fuse for cron vic 2008 ?


The location of the fuse panels should be in the owners manual.
Look under the dash on the drivers side as well as the side wall in front of the door. Some cars have another fuse panel in the engine bay.

Jul 21, 2014 | 2008 Ford Crown Victoria

1 Answer

1987 thunderbird computer reset


87 Thunderbird and 89 crown vic can use the same computer if they both have the 5.0, the numbers do have to match on the computer, a taurus 3.0 computer is not compatible.

Jul 05, 2012 | 1987 Ford Thunderbird

1 Answer

Why my 2007 crown Vic won't shift in gear


this can be due to out of adjutment of shifter cable which releases the shifter when brake is pressed.

Nov 18, 2011 | 2007 Ford Crown Victoria LX Sedan

1 Answer

Can I bleed my 94 Crown Vic brakes with out special equipment? I have bled several older brake systems on my vehicles without ABS systems in the past. Thanks Jim


I have done the brakes many times on my own 1994 Vic and never had a problem. Just start at the farthest brake in back and work your way forward. The drivers side front is the shortest line. If you do have any problems, I use a Vacuum handheld bleeder pump.

They make it nice because the 4 ounce cup that comes with it holds enough discharged fluid that you get very little spill, if any at all. You can gravity bleed them too.

Nov 06, 2010 | 1994 Ford Crown Victoria

1 Answer

How do i remove the door pannels


remove the screws for the catch all box ot the bottom of door, remove the window switch and the two hex head screws that hold the door panel on under the switch. remove the screws under the arm rest and remove it. When that is done it just un snaps from door

Mar 12, 2010 | 1989 Ford Crown Victoria

1 Answer

My '89 Crown Vic keeps blowing brake light fuses. Does fine until I use cruise control then blows fuse. Still has parking lights and signals but no brake lights. Has happened repeatedly. Now I don't use...


check under the dash st the brake pedal,there is a brake light switch which is tied into the cruise control,you could try unplugging that and see if it fixes the problem(remember you will have no brake lights while it's unhooked) if the problem is gone replace the switch.

Apr 29, 2009 | 1989 Ford Crown Victoria

1 Answer

Brake pedal stuck 1995 crown vic lx


did you bleed the brakes and get the air out of the lines and also if you have shoes on the back did you put the little shoe in the front and the largest in the back? and if you replaced the wheel cylinder or had any lines opened you have to bleed the brakes

Jan 15, 2009 | 1995 Ford Crown Victoria

1 Answer

89 Crown Vic brake lights work when park, not when moving.


Replace, or adjust your brakelight switch located on the brake pedal arm.

Sep 16, 2008 | 1989 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...