Question about 1980 Chevrolet Corvette

2 Answers

Cant find fluid level check on rerend - 1980 Chevrolet Corvette

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

It should be on the differencial housing. on the C-3 78-82

Posted on Sep 11, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

The level should be at the top of the hole in the oil plug,if it is full,and the plug is removed,the fluid should run out.If it does not,fill it until the fluid runs out.

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does my manual transmission have a tranny? I cant find where to check the fluid


the tranny is the transmission and to check the fluid level there is a plug on the side of the transmission to check the fluid level,
it's in the middle of the transmission some take a 3/8 rachet to put into the square hole to remove the plug in order to check and fill the transmission with gear oil

Dec 15, 2016 | Cars & Trucks

1 Answer

I have a 2000 chevrolet s10 v6 4x4 and it has been running rough fo week. like it wasnt getting enough power then transmis fluid started pouring out andi cant accelerate and now i cant get it to go


check the radiator level
have the reason for the excessive transmission oil level checked
check the color of the oil in the transmission and the sump

Sep 10, 2016 | Chevrolet Cars & Trucks

2 Answers

Cant get my 94 toyota camry to go into gear


ChecK fluid level with engine idling in park (auto fluid).

Mar 30, 2014 | 1994 Toyota Camry

1 Answer

The aoutomatic transmission slips after a few minutes of driving, cant grab any gears. Fluid level fluxuates from really high to normal.


try changing you transmition fluid and its filter first , if this doesn't in prove your bands in auto trans may need servicing or you may have faulty gear solenoids .you fluid should get higher as gets hotter this is normal , always check fluid after driving , do not over fill this is just as bad as underfull.

Mar 29, 2014 | 2006 GMC Sierra

1 Answer

How to check transmission fluid level? with the engine idling or?


TRANSMISSION CANT BE TOO HOT AFTER DOING A LOT OF DRIVING.BEST TIME TO CHECK TRANSMISSION FLUID WHEN ENGINE COOL.TO CHECK FLUID LEVEL.CRANK ENGINE UP.LET IT IDLE UNTIL ENGINE AND TRANSMISSION GET WARM. WITH ENGINE IDLING.SHIFT TRANSMISSION FROM PARK TO LOW 1 GEAR. TWICE DO EACH GEARS AT ONE TIME. WITH TRANSMISSION BACK IN PARK.CHECK TRANSMISSION FLUID LEVEL ON DIP STICK SHOULD BE AT THE FULL MARK IF NOT ADD A PINT AT A TIME TO GET TRANSMISSION FLUID LEVEL CORRECT. DONT OVER FILL.

Aug 18, 2011 | 2002 Ford Mustang

1 Answer

My 2007 G6 with a V6 engine doesn't have a dipstick to check the transmission fluid. Is this normal?


its a sealed transmission. it has a cap that screws on the transmission to add but you cant check the level. the only way is to put it on a level lift and under the transmission there are two small plugs that unscrew (metal bolts) may be allen head, cant remember exactly right now its been a while, one to drain and other about 2 or 3 inches higher that you remove and fill with fluid trough plastic cap i mentioned before till it starts draining trough the bolt hole. then you know it is level. tighen all screws and ports backup and your done.crzejkr_2.png

just add half qts by half qts till fluid drains from level plug. REMEMBER ENGINE MUST BE HOT AND RUNNING ON.
IF YOUR DRAINING CHANGING FILTER AND REFILING FROM NOTHING WARM ENGINE UP ON OLD FLUID THEN START PROCEDURE.

Mar 16, 2011 | Pontiac G6 Cars & Trucks

1 Answer

WeMy power steering fluid was leaking I tool it to the shop they told me It was the pump so I brought a new pump and got It put in and now I still cant turn my steering wheel


HEY DO THIS,YOU NEED TO BLEED SYSTEM. TO BLEED POWER STEERING SYSTEM.TO DO THIS.FILL THE POWER STEERING RESERVOIR TO COLD FULL MARK ON DIP STICK.WAIT A FEW MINITES,FLUID LEVEL DROP ADD MORE FLUID UNTIL REACH COLD MARK ON THE DIP STICK..WAIT FEW MINUTES.START ENGINE LET IT RUN FOR 2 OR 3 SECONDS.TURN OFF ENGINE CHECK POWER STEERING FLUID ADD MORE FLUID.DO THIS UNTIL FLUID LEVEL STOP DROPPING.WHEN FLUID LEVEL STOP DROPPING.SAFELY RAISE FRONT OF THE VECHICLE UNTIL FRONT WHEELS DONT TOUCH THE GROUND.START ENGINE UP.TURN THE STEERING WHEEL GENTLY FROM STOP TO STOP,CHECK THE RESERVOIR FLUID LEVEL LOOKS GOOD TURN OFF ENGINE LOWER VECHICLE .LOWER VECHICLE TO GROUND. LET VECHICLE SET FOR 2 MINUTES CHECK POWER STEERING FLUID LEVEL.IF STILL LOW ADD LITTLE MORE.TO THE COLD FULL MARK ON DIP STICK. DONT OVER FILL BECAUSE FLUID LEVEL RISES WHEN IT GET HOT.WHEN DONE IF STEERING WHEEL STILL FEEL HARD TO TURN YOU SEE AIR BUBBLES IN FLUID THATS WHEN FLUID HAS A TAN LOOKING COLOR WAIT 5 MINUTES AND.REPEAT THE BLEEDING PROCESS. DONT DRIVE OR OPERATE VECHICLE ON HIGHWAY UNTIL POWER STEERING HAS NORMAL OPERATION.

Sep 26, 2010 | 1999 Oldsmobile Alero

1 Answer

Cant find the dipstick on a standard jeep liberty 2003 to change the transmission fluid


The transmission fluid stick is usually toward the back of the engine.That's right where the engine transmission connect together.It should also be labeled transmission on top of the stick.To check transmission fluid level,you need to let it run about 5 minutes on a level surface,then check the level.When you check it,if you see little metal flakes on the stick,there is something very wrong with your transmission.Good luck! Greg

Aug 14, 2010 | 2003 Jeep Liberty

1 Answer

Transmission fluid


I assume u found the dipstick to check the fluid level? Use a funnel to add fluid at the dipstick tube, slowly, while engine is running. Shift thru the gears several times, recheck level, don't overfill.

Dec 14, 2008 | 2003 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...