Question about 2005 Chevrolet Equinox
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
cabin air filter is in the airbox behind the glove compartment,
unclip the glovebox, look behind it for a small access door, undo the latches, and voila! theres your cabin air filter! (if equipped, some model equinoxes dont have it!)
Posted on Apr 01, 2009
Check out this link... better than a diagram, a photo.
note: on my screen this guy's "purple" circle looks more like a light blue, maybe lavender.
Posted on Jun 27, 2009
Ok, Alternators are a breeze on these things. There are two bolts that hold it on, and 2 sets of wires. If you haven't taken anything apart yet, and the belt is still on it, here's what to do. You will want one of those rubber or elastic bungee cords, about 2 and a half feet long(this makes it easy). Hook that bungee cord to your hood somewhere, so that it hangs down. Hook the other end on the serpentine belt right next to the alternator pulley. If you need to prop the hood up with a stick or something to keep it up, do so. Pull up on the belt, and watch the pulleys. The one that probably has a plastic pulley on it that moves up and down(this is the tensioner) is the one that you'll put a deep well socket in the middle of with a ratchet, and turn counterclockwise. This will make the belt go loose. Now you can work the belt off the alternator pulley, and once you get it off, the bungee cord will keep it in place, so you don't have to look at the diagram. Otherwise, if it comes off, there is a sticker just under the hood either on the fan shroud or the radiator support that has the belt diagram. Now, you can disconnect the battery, pull the rubber boot down off the nut and post on the back of the alternator, remove the nut and wire, and then unhook the wire from the side of the alternator. Now, you can remove the two bolts that hold the alternator on. You Will need to pry the alternator off at this point, as it fits really tightly in place. A socket extension or a large flat screwdriver works really well for this. Once you get it off, put the new one on exactly as you took the old one off. Note, you will have to release your tension on the tensioner at some point; i just ease it down, or if I can pull it off, wedge it somewhere where it won't loosen very far. Remember, on the tensioner, you're not trying to take the nut off. All you're doing is using it to move the tensioner arm. That's all there is to this job. Sometimes it can be stubborn with the prying part, especially getting it into place. Hope this is what you're after, and if you need more info, leave a comment for me.
Posted on Feb 22, 2010
Testimonial: "Great advice on the bungee cord!! Well written advide and easy for a novice to follow. Thanks"
Tips for a great answer:
Dec 03, 2014 | 2005 Chevrolet Equinox
Mar 16, 2013 | 2005 Chevrolet Equinox
Aug 10, 2011 | Chevrolet Equinox Cars & Trucks
Oct 31, 2010 | 2006 Chevrolet Equinox
Accessory drive belt routing-3.4L engine
Oct 23, 2010 | Chevrolet Equinox Cars & Trucks
Aug 05, 2009 | 2005 Chevrolet Equinox
Jul 15, 2009 | 2005 Chevrolet Equinox
May 27, 2009 | 2005 Chevrolet Equinox
Apr 27, 2009 | 2005 Chevrolet Equinox
133 people viewed this question
Usually answered in minutes!