Question about 1986 Chrysler LeBaron

1 Answer

How to remove part of broken key from ignition,1986 chrysler labaron?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 17,970 Answers

After disconecting you battery. If you remove the steering wheel cover I believe it is 4 screws. Then if you look at the bottom of the steering wheel near the ignition you should see a little button/hole. you need a very small screwdriver or pen/pencil to push this button. Push it and turn the key to the on position. It should come out farly easily. Once you have it out. hold the outside part and while watching the end oppisit the key end turn the key until the other end lines up as to appear to be able to slide apart easily. then that same button you pushed eariler you need to pull out carefully. when it is out the outside and inside of the ingition should slid apart easily and you should be able to see the broken part of the key and push it out using a small knife or something tine but hard. It sounds hard but it really isn't just make sure you keep every thing lined up. so it goes back together easily.

If you thnikin that cant do it, a qualified locksmith can often do that for you. They have some rather clever tools for just such a situation.

Hope helps.

Posted on Sep 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I find location of fuel pump fuses or relay for 1986 Chrysler labaron?


1986? oh boy, it\'s been a long time. I don\'t recommend extensive use of starting fluid, it is hard on valves and rings.



if I remember correctly, this year still had fuses inside the glove box. Look there first. If nothing than raise the hood and look for black box. Remove cover by pressing the snaps out of the way and inside the cover there should be a guide to tell you which is for the fuel pump. I don\'t like being the one to tell this, but there is a possibility the fuel pump has shorted out. Try replacing the fuses, oops it might a relay instead of fuse, if that doesn\'t fix it , it fear you will need a new pump.

Dec 21, 2014 | 1986 Chrysler LeBaron

1 Answer

What is the black and green wire attached to the 1991 Chrysler Labaron radio used for?


this may be the memory wire for the factory unit if putting in an after market radio you shouldn't need it

Jun 28, 2012 | 1991 Chrysler LeBaron

1 Answer

Steering colum is locked and the key wont turn......how to unlock it? in the cold for 4 hrs trying to get the darn key to turn


IF TRANSMISSION ALL THE WAY IN PARK.AND YOUR BATTERY NOT DEAD.YOUR IGNITION KEY LOCK CYLINDER IS BROKEN.YOU HAVE TO REMOVE IGNITION SWITCH WITH KEYLOCK CYLINDER TO REMOVE KEY.

Feb 24, 2011 | Chrysler Voyager Cars & Trucks

1 Answer

Broken ignition switch in 1986 m/b 560sel Have


you will have to replace the lock barrel(not cheap)

Apr 06, 2010 | 1991 Mercedes-Benz 560

2 Answers

Can you tell me where the fuel filter is located, on a 1986 labaron? It has a carborator ,,, we looked and could not find its location, under the hood


It's mounted to the frame rail under the car near the fuel tank. I wish they would put them under the hood like many used to!

Feb 24, 2010 | 1986 Chrysler LeBaron

2 Answers

1994 crystler labaron alarm system deactivation


Lock your doors. Then Unlock with the key. Unless you mean complete deactivation

Nov 23, 2009 | 1994 Chrysler LeBaron

1 Answer

''Power Loss'' light comes on, what does it mean?


it sounds like you need a new alternater. to be sure, most autoparts stores will check it for free, but you'll have to take it off yourself.

Nov 30, 2008 | 1986 Chrysler LeBaron

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...