Question about Pontiac Grand Prix
I would ask a car dealer or maybe Auto Zone might help you.
Posted on Sep 10, 2010
From autozone.com, and assuming no supercharger (reply if you have SC):
for the VIN K engine
For the VIN L engine
Posted on Sep 10, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 28, 2015 | 1999 Oldsmobile Cutlass
Park the Pontiac in a safe work area and open the hood.
Inspect the top of the black plastic cover that surrounds the fan for the serpentine belt routing diagram. This diagram has the instructions for installing the new serpentine belt around the accessory pulleys.
Inspect the front of the engine and locate the automatic belt tensioner. The tensioner on the 1999 Pontiac model vehicles is located between the alternator and the crankshaft pulley. The tensioner has a pulley on one end with a bolt head in the center of the pulley. Use the bolt head to rotate the tensioner.
Turn the tensioner counterclockwise with the breaker bar and a metric socket. Pull the belt out from under the tensioner pulley with your other hand. Then, slowly let the tensioner retract until it stops.
Pull the belt out of the other remaining pulleys. Then, pull the belt out of the engine bay and lay it on the ground.
Route the new belt around the crankshaft pulley. Then, route the new belt around the other remaining pullleys by using the serpentine belt routing diagram for instructions.
Rotate the tensioner pulley counterclockwise with the breaker bar and socket. Then, slide the new belt under the tensioner pulley. Slowly let the tensioner retract until it stops. The tensioner pulls all of the slack out of the belt and brings the new belt to the proper tension. Remove the breaker bar and socket from the tensioner pulley.
Inspect the new belt to ensure that it is seated inside of all the accessory pulleys as directed by the diagram. Then, crank the engine and allow it to run for about 15 seconds. Turn the engine off. Inspect the belt again once more to ensure that
the belt is still around each pulley. Close the hood.
May 22, 2011 | 1999 Pontiac Grand Prix
May 20, 2011 | 1999 Pontiac Grand Prix
May 18, 2011 | 1999 Pontiac Grand Prix
Jul 16, 2010 | 1999 Pontiac Grand Am GT
Jan 15, 2010 | 2006 Pontiac Grand Prix
Dec 12, 2009 | 2004 Pontiac Grand Prix
Sep 18, 2009 | 2004 Pontiac Grand Prix
May 03, 2009 | 1999 Pontiac Grand Am GT
Mar 26, 2009 | 1999 Pontiac Grand Am GT
171 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: