Question about Buick LeSabre

3 Answers

Where is the turn signal flasher unit plugged in on a 2005Buick Lesabre Custom, 6cyl?

Posted by on

  • 1 more comment 
  • rajahd Sep 10, 2010

    Telling me to look In the manual is not a worthy solution. I have looked in the manual, I do not think you have, and it is not there. THAT IS WHY I POSTED THE QUESTION.

  • rajahd Sep 11, 2010

    That is a simple 15 amp fuse. It is not the flashing unit. Your are right about the page in the Owner's manual for that fuse, but not the flasher.

  • rajahd Sep 11, 2010

    Yes

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 749 Answers

Where is the turn signal - 491538.gif491538.gifThis is located under the dash left side of steering column.Hope these pics turn out or will have to try a different way to upload them.

Posted on Sep 11, 2010

  • Jonathan S
    Jonathan S Sep 11, 2010

    Hope this pic uploads

  • Jonathan S
    Jonathan S Sep 11, 2010

    The arrow indicates front of vehicle and the turnsignal flasher module is the box to the left along with its wiring harness.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 17,970 Answers

For 2005 Buick Lesabre 3.8L SFI OHV 6cyl the TURN SIGNAL and HAZARD must to check in Rear Underseat Fuse Block; this rear fuse block is located beneath the rear seat on the driver’s side. The rear seat cushion must be removed to access the fuse block, in the position 36.

Also, this description and location can find it this LINK, for the 2005 Buick Lesabre - Owners Manual (page 332 and next).

Hope helps.

Posted on Sep 10, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 40 Answers

In the fuse box see oem owners man for that

Posted on Sep 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the flasher for the turn signals on a 1996 buick lesabre custom


should be in the fuse panel it will be round and probably white or silver

Sep 22, 2011 | 1996 Buick LeSabre

1 Answer

How expensive is the repair of a turn signal flasher unit in a 1994 Buick LeSabre? thank you!


The turn signal flasher unit is a simple plug in device. It should not be expensive at all. Most auto parts stores can sell you a replacement, and even show you how to find it and replace it yourself.

May 13, 2011 | 1994 Buick LeSabre

2 Answers

I have a 93 Lesabre the we can't find the flasher for the turn signals help where is it


If the lights only come on but dont flash, activate your emergency flasher with the turn signal off. Take a walk around the car and see that all 4 bulbs light up. If not replace the faulty bulb before looking to replace the turn signal flasher. The flasher unit is located under the dash on the drivers side of the vehicle. You will have to remove the panel under the dash to get at it.

Aug 19, 2010 | 1993 Buick LeSabre

1 Answer

Blinkers wont work.all my lights turn on flashers work just no turn signals only front side markers what can it be?


This vehicle should have 2 flasher relays one that operates the emergency flashers and one operating the turn signals.Easiest way to locate these would be to turn the emergency flashers on and listen to where the clicking is coming from usually the flasher are pretty close to each other.Once you find the flasher unit you can swap the flasher unit that is working with the one that is not and if the turn signals work after that you will need to purchase another flasher relay.

May 27, 2010 | 1993 Buick LeSabre

1 Answer

Turn signals dont work


For 1993 Oldsmobile Cutlass Ciera 3.3L FI OHV 6cyl. you have two flasher units, one for Hazard Light and one for Turn Signal...

The hazard flasher is located in the convenience center, under the dash, on the left side kick panel. The turn signal flasher is installed in a clamp attached to the base of the steering column support inside the car. In all cases, replacement is made by unplugging the old unit and plugging in a new one.

Hope this help (remember comment and rated this help).

May 12, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Turn siglnal do not work


For 1993 Buick Lesabre 3.8L SFI OHV 6cyl. turn signal won't work, I suggest check your FLASHER.

The Flasher is located front seating area, driver side, under dash, mounted on kick panel.

Hope this help (remember rated this help).

Mar 24, 2010 | 1993 Buick LeSabre

2 Answers

Where is the flasher unit for the turn signals on a 1993 buick lesabre


Hello, I feel that the answers I've come across on the internet are somewhat misleading. The actual placement of the turning blinker flasher unit is directly above the fuse box (Do not get confused with the rather large silver cylinder directly to the left of the steering column, as other explanations indicate I got confused and tried taking this part out.) The Turning signal Flasher Unit is actually way way up above the fuse box and is easier to see if you pull the fuse box down as if you were going to check on a fuse. The Turning signal Flasher Unit looks like a small silver cylinder that’s about 1 1/2 inches in Diameter and about 1 1/1/4 inch tall. It is connect by a metal clip (Metal clip helps to amplify the ticker sound). If you cannot find where exactly it is, turn the blinker on to the side that works and feel for the vibration from the ticking sound and follow it until you can feel it from the proper cylinder (Both turning lights work off of the same cylinder). You can literally pull the cylinder down to bring it down and replace the part (I got the part from AutoZone for $7.99, electrical version, not the electro-mechanical...which they had plenty in stock as it is a generic part). Once you have the part down as far as it will go (do not yank to hard) then pry the "V" shaped prong away from the connector (This can be difficult, and may need pliers...make sure not to grip too hard). Then just plug in the new Flasher Unit. The hard part is getting the Flasher unit to clip back onto the metal area that it was originally attached too, so I just shoved it back up as I feel it is loud enough. If you choose to reattach it, I've heard that you will have to take apart your dash to reattach (In my opinion the costs way out way the benefit). Good Luck and I hope this explanation helps more than others. I searched everywhere looking for a good example and I could not locate one, so I decided to post this to clear up everything I learned from performing this task myself.

Mar 15, 2010 | 1993 Buick LeSabre

1 Answer

Turn signal flashers will come on but won't blink


For 1994 Buick Lesabre 3.8L SFI OHV 6cyl the turn signal flasher is under the instrument panel to the left of the steering column brace. On the Bonneville, it may be on the left side on the shroud. The hazard flasher is under the instrument panel to the right of the steering column.

The turn signal flasher is installed in a clamp attached to the base of the steering column support inside the car. In all cases, replacement is made by unplugging the old unit and plugging in a new one.

Hope helped (remember rated and comment this).

Mar 03, 2010 | 1994 Buick LeSabre

2 Answers

Where is the location of the turn signal flasher?


I have a 94 Sonoma and to locate the turn signal flasher, inside, under dash, on left side is a plastic sound protector, mine had 3 screws holding it up, drop this down and straight in you will see a 1" round thing - this is the flasher.

Jan 08, 2010 | 1995 GMC Sonoma

1 Answer

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did...


I think that your flasher is bad I believe that the 4-ways flasher is a seperate flasher unit it should be in the fuse box and look like the 4-way flasher , to find the flasher turn on the 4-ways and you can feel it or hear it flashing and lok for the flasher for the turn signals
Mike

Jun 26, 2009 | 1990 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...