Question about 1996 Lexus ES 300

1 Answer

My car has a problem with front driver side window glass.it slide down but does not go up.when i turn on window switch it sounds cracking but window does not go up. is it a prblm with regulator or motor? or what

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 197 Answers

The window may be out of the track. Take it to the dealer, they can fix it pronto, cost about $55.00 if that's all that's wrong with it.

Posted on Sep 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i install side glass?


the glass has bolts holes in it that has bole in it take the class out when it is half the way down

May 04, 2017 | 2000 Saturn L-Series

1 Answer

Replace bashed in passenger side window


one screw at handle two on arm rest or under switch the rest is plastic retainers just putt and use trim tool or screw driver two bolts hold glass to regulator have to lower window till you see then remove remove bolt that holds front track and slide glass in top and put in track front an back set in regulator and bolt in raise then bolt front track

Aug 04, 2012 | 1995 Volvo 960

1 Answer

How to repair front driver side widow motor.at fir st there was a grinding sound that made me think it was off track. now its not doing anything. motor works all the way up and down but glass doesnt move.


{: ) Sounds like you have a faulty window regulator. Usually the regulator cable gets broken or detached. If this is the case, your window may not move at all, even though the motor seems to be working when you switch the button up or down.
The door trim panel need to be removed totally. Once removed, you will find two bolts for the glass catch, 3 bolts for the motor, and 4 bolts for the regulator.( all #10mm )
Begin by loosening the 2 bolts on the rubber insulated glass catch, just enough to pull the glass up from its track. You may need an assistant. You need to lift the glass (only) to the top closed position, and apply a strong masking tape to hold the glass on that position for the time being.
Continue by removing the motor and regulator bolts. I hope the replacement part is readily available. I think the window regulator comes in assembly, the motor is integrated to the regulator.
When bolts removed, simply pull out and fold to remove outwards. Be sure you remember how it was mounted before you removed it.
Installation is just the reversal procedure. Position first the regulator assembly and semi-tight all the bolts. Its better if you just follow the old bolt markings. Secure motor connection.
Loosen the two bolts on the glass catch, just enough for the glass to slide and seat freely. Temporarily connect the window switch. Press the up button slowly and align the glass with the catch. When glass seated fully, tighten the 2 bolts on the catch to hold it firmly. You can remove now all the tapes you sticked.
Try to operate the window up and down carefully and observe. Make that final tightening of the regulator with the glass resting in the the full up position. Re-install the trim panel. Goodluck.

Nov 17, 2010 | 2008 Chevrolet Suburban

1 Answer

Renault Magam front window


the window glass sits in a metal frame attatched to the glass itself, this in turn runs on a scossor framework with 2 nylon wheels attatched.....sounds like the glass frame has run off the scossor frame....remove door panel, and place the framework on the glass part,back onto the scossor wheels,also add some grease to the framework

Jul 22, 2009 | 2004 Renault 181

1 Answer

How to take out the light assy on a 2004 Toytota sienna van.RH side. Do you have to take off the front cap (bumper)


Yes....herer is the steps to replacing it:

Headlight Assembly Removal & Installation Standard Headlights To Remove:
  1. Disconnect the battery ground cable.
  2. Remove the left and right front inner fenders. Fog light & headlight assembly (exploded view) toyota-06-00-5662.gif

  3. Remove the 8 screws and separate the front splash shield from the front bumper fascia.
  4. Remove the 5 push-pins from the top of the fascia grille.
  5. Release the retainers on the left and right sides of the front bumper fascia and pull the fascia toward the front of the vehicle.
  6. Disconnect the headlight assembly connectors.
  7. Remove the mounting bolt, 3 screws and headlight assembly.
  8. Turn all bulb sockets counterclockwise to remove.
To Install:
  1. Turn all bulb sockets clockwise to install.
  2. Align the retainers with the slots and install the front fascia.
  3. Install the 5 push-pins on top of the fascia grille.
  4. Install the front splash shield on the front bumper fascia with the 8 screws.
  5. Install the left and right front inner fenders.
  6. Connect the battery ground cable.
  7. Vehicles with power windows perform the following steps:
    • Turn the ignition switch on.
    • Open the power window halfway.
    • Close the window and continue to hold the switch up for at least 1 second after the window is closed.
    • Ensure that the auto up/down circuit is operating properly.
    • If the auto up/down circuit does not operate, disconnect the battery ground cable for 10 seconds.
    • Connect the battery ground cable.
    • Turn the ignition switch on.
    • Open the power window halfway.
    • Ensure that the auto up/down circuit is operating properly.
    • If the auto up/down circuit does not operate, turn the ignition switch on.
    • Open the power window halfway.
    • Close the window and continue to hold the switch up for at least 12 second after the window is closed.
  8. Vehicles with sliding roof system perform the following steps:
    • Turn the ignition switch on.
    • Press and hold the TILT UP switch until the glass tilts to the full up position. The glass will automatically tilt slightly down after it reaches the up position.
    • Release the switch.
    • If the sliding roof does not operate properly, replace the sliding roof ECU.

May 07, 2009 | 2004 Toyota Sienna

1 Answer

Drivers side window won't go up or down


Have you checked the window regulator. (electric window motor). I seems a comon problem for the plastic to break at the bottom where the wire which pulls the glass up and down. The motor will still sound (clunk) if you use the window switch but will not lift the window.

Remove the trim off the door.
Undo the bolts holding the glass into the plastic at the bottom of the window and carefully remove the glass.
Unbolt and remove the sliding piece that holds the glass.
You should find the broken plastic at the bottom.

Replace and reinstall. Aftermarket parts are available at a fraction of the cost of buying new nissan parts. Second hand parts are available but costly.

Apr 24, 2009 | 1994 Nissan Pathfinder

1 Answer

2001 Saab 95 se driver/passenger windows.


A car I owned the left rear window did that. I could pull it up by taking a hold of it while another person held the switch. They told me the problem was the track was made out of plastic and it had broken. They had to replace the track. Yes it was expensive to repair but is ok now.

Mar 10, 2017 | 2000 Saab 9-3 Viggen

1 Answer

Manual Driver side window


needs a window regulater and i reccomend a window run channel. (the rubber the glass slides in) if it doesnt operate freely.

Sep 11, 2008 | 2000 Honda Civic

Not finding what you are looking for?
1996 Lexus ES 300 Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...