Question about 2007 Chrysler 300 AWD Sedan

2 Answers

How do i fix the shifter on a 2007 chrysler 300 it will not go out of park.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an 05 Chrysler 300. The problem is actually a very small pink hook that has broken and is now preventing from pulling the device that let's you move the shifter from Park. Remove the cover for the shifter and put your finger inside on the top left corner of the shifter facing the steering wheel. You'll feel a button. Press it while pressing down the Break and it'll allow you to move the shifter. I recommend getting it repaired at a dealer as soon as possible. Hope this helps. You can find more information here http://www.lxforums.com/board/showthread.php?t=73876

Posted on Dec 14, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 197 Answers

Turn the steering left and right, it will lock your car in park or call dealership.

Posted on Sep 10, 2010

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: 2005 chrysler 300 base model

The best solution that i can give you is to pumping the brake while hammering the shifter with a mallet and yanking the shifter down (all at the same time). its should be enough if you want another answers here is a link:
http://wiki.answers.com/Q/What_do_you_do_if_your_car_is_stuck_in_park

Posted on Jun 19, 2008

  • 3 Answers

SOURCE: 2007 Chrysler 300 won't shift

It is the pink park lock out devise. Try here: http://www.custombilletstore.com/product_p/1028.htm

You can purchase the fix and do it yoruself to save cash. Dealer will charge you over $100 to replace the whole area with more cheap plastic.

Posted on Feb 05, 2009

  • 2 Answers

SOURCE: I can not change the shift gear out of park.

Just Fixed my yesterday there is a spring attached to a plastic peice inside the gear box that breaks it is common in chryslers I have a 300, I pulled up the center counsel removed the gear box, drilled a hole in the pink cheap plastic peice attached the spring back on with a zip tie and ready to go, Note: chrysler will not sell you the pink peice they will make you buy the whole gear box for over $200 if you want them to install it now your looking at $4-500. took me 2 hours i can probably do it in an hour now hehehe

Posted on Aug 31, 2010

Mr BrokRench
  • 1623 Answers

SOURCE: my chrysler 300 shifter is

pull up and out on the small storage compartment to the right of the shifter, this will uncover a small pink lever...that is the emergency release. If that don't work...the problem is further down on the shifter and requires removing the console, more work, and some new parts. Good luck, i hope this helps.

Posted on Jul 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 chrysler 300 stuck in park how to get it out of park


Could be the brake switch or the lock solenoid among other things.
You could try moving the shifter before you turn the key switch to the on position.
The brake pedal sends a signal to the shift lock solenoid to unlock it.
That circuit would need to be checked.

Apr 19, 2013 | 2007 Chrysler 300 AWD Sedan

1 Answer

2007 chrysler 300...gear shift will not move this morning...


check your fuses or bypass your brake switch to activate your shift lock solenoid,if that dont fixes the problem you need to replaced the shifter assy.

Aug 05, 2012 | 2007 Chrysler 300

1 Answer

HAVE CHRYSLER 300 THAT WILL NOT COME OUT OF PARK, DROVE ALL DAY PARKED AT OFFICE FOR 1 HR, WITH BRAKE ON WILL ALLOW SHIFTER TP MOVE TO RIGHT, BUT WILL NOT ALLOW YOU TO PUT IT INTO REVERSE OR DRIVE


Its the 'pink' thing. Remove the shifter knob, use a small screwdriver to pop off shifter bezel, un snap shifter cover, 4 clips, two on passenger side, two on driver side, remove 4 each 10 mm nuts holding shifter to the car. O.K. in the front of the shifter, is a pink cam, that prevents the shifter from moving, if the car is not on. It has broken. The small cable on your left controls it. Remove it. (disables it) Reassembel, and get the hell out of there!. Mark, 209-613-0092. Took me 15 min.

Sep 30, 2011 | 2007 Chrysler 300 AWD Sedan

1 Answer

2007 chrysler 300 stuck in park .how to get it out of park?


It will not allow the shifter to move unless you step on the brake. Otherwise, there is some issue with the mechanism located in the shifter console that interacts with the shifter cable.

Dec 25, 2010 | 2007 Chrysler 300 AWD Sedan

1 Answer

My 2007 Chrysler 300 starts fine but will not shift into any gear


I just finished repairing my 2007 - 300 for the same issue. Pulled in the garage.. went to go out , and could not get the shifter out of park. Researched this issue online.. First step is to remove the right side plastic holder next to the shifter. There is a small hole that has a pink plastic piece. Push this in while moving the shift lever out of park. If the shift lever does not move, then the other "pink thingy" piece that is located inside the shifter box has most likely broken. There is a tiny spring that attachs to this pink piece ( probably a $0.50 piece of poorly engineered product ) that breaks off. See the following link on how to fix this problem. I drilled a small hole in the pink plastic piece where the small hook broke off.. then attached a cotter pin through the hole , and fastened the spring to that... should not have any further problems.. this link demonstrates how to remove the shifter box. The entire process took me roughly 2 hrs to complete... saved myself hundreds of repair dollars!!http://www.300cforums.com/forums/tech-tips-review/61876-tech-tip-review-park-lock-out-mechanism-installation.html

Aug 23, 2010 | Chrysler 300 Cars & Trucks

3 Answers

My 2008 Chrysler is stick in park


emove trim ring around gear sift, turn the car on, push down on breaks, use a screwdriver to push little pink plastic piece back

Jun 03, 2010 | 2007 Chrysler Sebring Sedan

2 Answers

2007 Chrysler 300 won't shift


It is the pink park lock out devise. Try here: http://www.custombilletstore.com/product_p/1028.htm

You can purchase the fix and do it yoruself to save cash. Dealer will charge you over $100 to replace the whole area with more cheap plastic.

Jun 28, 2008 | 2007 Chrysler 300 AWD Sedan

Not finding what you are looking for?
2007 Chrysler 300 AWD Sedan Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...