Question about 2000 Chrysler Cirrus

1 Answer

2000 Chrysler Cirrus: I was just informed by my

2000 Chrysler Cirrus: I was just informed by my mechanic that the heater cable to adjust the temperature of the air coming from the heater is broken and the entire dash must be removed to replace the cable. Is that the only solution? The temperature indicator on the car is working normally, the engine is heating normally, the heater core is working normally, the broken cable means that the air is not allowed to circulate around the core and then heat the passenger compartment of the car.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 8,269 Answers

I'm reading the instructions at autozone.com, and I don't see anything about removing the dash. You do have to pull out the trim around the control unit and unscrew the unit to get to the back of it, but I don't see why you can't get to all the cables and doors by sticking your head under the dash. If I were you, I would do it myself. This would be about a 1 hr job for me. Maybe a little longer if I was new at it...let me know if you want me to copy the instructions and send them on.

Posted on Sep 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 cirrus is leaking rad fluid somewhere,radiator is not leaking


check your hoses, water pump heater core radiator cap, if car has been overheated, check exhaust for steam and smell of coolant, check oil make sure it is not milky, last 2 are symptoms of blown head gasket

Sep 01, 2013 | 2000 Chrysler Cirrus

1 Answer

Change heater core 2000 chrysler cirrus


Click here to see how to replace the heater core.Here's the heater core.

Dec 12, 2012 | 1996 Chrysler Cirrus

1 Answer

How to tighten a serpentine belt on 2000 chrysler cirrus


Try this, adjust the belt tension so that the belt is sloppy and then tighten the center bolt. If the pulley is straight that I am going to bet that the belt is stretched or wrong and the tensioner puller is bottomed out which would make it go crooked.

Oct 12, 2012 | 2000 Chrysler Cirrus

1 Answer

I have a 2000 LxI Chrysler Cirrus, 6 Cyl. and can't find the air conditioner drain hose. Where is it?


Should be in the bottom of the heater box and drain to the outside of vehicle.

Aug 31, 2012 | 2000 Chrysler Cirrus

1 Answer

My 2000 chrysler cirrus driver side window wont role down. does it require a fuze or a mechanic?


if was fuse no window would move- check to see if drivers door has a window lock switch first - if not-
have a mechanic see if power at motor and go from there

May 03, 2011 | 2000 Chrysler Cirrus

2 Answers

My 2000 chrysler cirrus had a small undetectable water leak. My mechanic 1st said it was the freeze plugs rusted, then he replaced the radiator cap, thermostat, and gasket seal. I drove it 20 miles and...


sounds like a snow job
should have pressure tested the system on the hoist and all leaks fixed the first time round
the cap , thermostat and whatever gasket that was replaced was not necessary as the cap and thermostat would not be the leak
ask what the long tube is for as radiator and heater hoses can be got from a local parts shop or dealer spares
next time use accredited service centers and get a better job done cheaper

Jun 26, 2017 | 2000 Chrysler Cirrus

1 Answer

Cirrus 2000 rear brake jam


if it's drum brake, remove the drum and check for dust collected inside the drum. also check the emergency brake cables for free of rust and are not binding

May 25, 2010 | 2000 Chrysler Cirrus

1 Answer

2000 Chryler Cirrus - engine races all the time


Either the throttle body is being held open by something or the idle control valve is stuck open. Check where the throttle cable hooks to the throttle body, make sure the cable is not caught on something.

Jan 10, 2010 | 2000 Chrysler Cirrus

1 Answer

Steering is really stiff after replacing power steering pump on 2000 chrysler cirrus??


Is the drive belt adjusted properly. Did you bleed all air from the system after installing the pump? Start the engine and turn the steering wheel from left to right fully 10 times. This will remove any trapped air. Check the fluid level and top it off.

Nov 21, 2009 | 2000 Chrysler Cirrus

Not finding what you are looking for?
2000 Chrysler Cirrus Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...