Question about 2005 Hyundai Santa Fe
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Hyundai Santa Fe ...cruize
be sure the brake lights are working this may be a problem with the brake light switch, also be sure to check all fuses in car and under hood please rate -jeff
Posted on Sep 13, 2008
Most likely the o-ring seal between the torque converter and the transmission is going bad. Get that transmission rebuilt pronto before serious damage is done! But first, have a mechanic drop the transmission pan and look for signs of a very thin silvery film coating the inside of the pan. If found, then the transmission definitely will have to be rebuilt, and the torque converter will also have to be replaced since embedded metallic particles in the old torque converter will eventually come loose, due to wear of the clutch plates within the torque converter, and eat up the rebuilt transmission. Now, here is the deal once the transmission has been rebuilt:
Change the transmission fluid and filter once a year -- no matter what! If you do this, then you should never have any more problems with the transmission.
Posted on Apr 20, 2009
There is a senor that is in the caliper they are pricey and annoying a way to try to see if its it make a soltuion of salt water, heavy salt soak the whole caliper reall good i mean real good with start the veh. back up and down the drive way then rinse it off throughly and see what thew the lights do, do this f or ll sides, make sure you throughly rinse after and dont let the salt water saty on for mor e than 10 mins. But this will fluse the senosr and clean it...Sometime resets them,,,,Sounds crazy but it works if that is the problem. Try this and let me know fro m there
Posted on May 18, 2009
This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.
Posted on May 22, 2009
Do you want to replace the Go to belt yourself? Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
Posted on Jun 06, 2009
Tips for a great answer:
Jan 13, 2015 | 2004 Hyundai Santa Fe
Jul 25, 2011 | 2004 Hyundai Santa Fe
Sep 29, 2009 | 2004 Hyundai Santa Fe
Aug 17, 2009 | 2006 Hyundai Santa Fe
Jul 02, 2009 | 2002 Hyundai Santa Fe
Jun 29, 2009 | 2002 Hyundai Santa Fe
Jun 21, 2009 | 2002 Hyundai Santa Fe
153 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: