Question about 2001 Ford F150 Styleside SuperCrew

1 Answer

The display is not working , how do I take out to solder connection?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 984 Answers

Missed this the 1st time, sorry. Answered in the new problem, here is part of the text
http://www.fixya.com/cars/t5953393-need_display_panel_temp_compass
Could be 1 of 2 types.
1st type has a single crew in the bottom of the overhead console, with a screw in it, and spring clips towards the display.
2nd type is held on with spring clips only, they are hard to pull out the 1st time.
Check which type you have.

Posted on Sep 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2004 Jeep Grand Cherokee the radio display is blank can I fix this


Sure. Pull the radio, take off the metal cover around it. At the face and the bottom of it, there around 20 leads soldered to the board. Use a soldering iron and resolder them(cracked solder joints). No extra solder is needed. This fixes about 98% of no display problems. Every once in a while it is a chip. In this case, replace the radio.

Jan 30, 2016 | Jeep Cars & Trucks

1 Answer

Dash display out climate control


i took the climate control unit out and using a pencil soldering unit re-soldered all connections to the display unit and it seemed to do the trick.

Apr 04, 2013 | 2001 Buick Park Avenue

1 Answer

Instrument cluster black


If you have the 3-Panel Digital Cluster, with the Fuel on the Left.., Speed in Center.., and Odometer on the Right.., and the Cluster is going Wacky.., works one minute then craps out the next.., take the dash apart and remove the Digital Cluster. Take your time when unplugging the harness behind the cluster, use a mirror if you have to.., to unplug it correctly.

The problem with this Digital Display is the Solder Connections.., at the 14-Pin IC Chip.., which is directly behind the Odometer Display on the main Circuit Board. When you get the Cluster removed.., again.., take your time.., and take the cluster apart.., so you get the main circuit board out. The 14-Pin Integrated Circuit (IC) Chip is marked with an IC2 on the main board.., which as mentioned is behind the Odometer Display. The IC Chip is usually Black in Color.., and is '@' 1/4" x 3/4" You will need a Soldering Iron.., @ a 30 watt with a pointed tip.., don't use a Soldering 'Gun'., too hard to use and too hot.., you don't want to cause yourself more problems by messing up the board circuit tracks by overheating them.., so it's best to use a smaller iron. It is a good idea to have some fine strand solder on hand.., but you should not need it.., all you want to do.., is to 'Re-Tin'.., or 'briefly' melt the Solder at all 14-pins of the IC Chip.., on the back side of the board.., to Re-Flow or Re-Solder the Connections of that 14-Pin IC Chip to the Circuit Board. That's all it is..!!!

I just repaired my 1991 Olds Cutlass Supreme 3.1.., 3-Panel Digital Instrument Cluster in this manner.., and it has been "Perfect" for a month now..!!

Take your time.., get it all back together.., and my bet is that it will be good to go for many more years to come..!!

Good Luck.

Oct 10, 2012 | 1991 Oldsmobile Cutlass Supreme

1 Answer

My dash board milage light does not display


Probably a bad solder connection on the instrument panel between the led display and the circuit board itself. Instrument panel needs to be removed for this proceedure. Remove the back cover from the circuit board and carefully remove the circuit board to access the led display. Carefully lift up the display and look to see if any of the solder joints from the solder legs are loose. resolder as needed. Plug the circuit board in the dash and turn on the key to see if it works.

Apr 11, 2011 | 1999 Chevrolet K1500

1 Answer

Cluster in 2000 silverado isn't working what do I do to fix it


Usually if the odometer/PRND32L LED Display does not work is because of faulty soldering on the circuit board where the LED Display is soldered. Remove the back cover if the instrument panel and carefully lift up the circuit board. Gently lift up the led display and notice where the solder straps are connected to the display. This is usually the place where the solder is not making a good connection. Resolder all the point or take to an electronic repair shop and have them perform the task. This most all the time fixes the problem.

Apr 04, 2011 | 1999 Chevrolet K1500

3 Answers

2005 freestar cannot see mileage


you need an intrument cluster

Jul 22, 2010 | 2005 Ford Freestar

3 Answers

1999 Chevy Silverado 1500 V6 transmission selector light and milage light not on checked fuse it was ok


Usually if the odometer/PRND32L LED Display does not work is because of faulty soldering on the circuit board where the LED Display is soldered. Remove the back cover if the instrument panel and carefully lift up the circuit board. Gently lift up the led display and notice where the solder straps are connected to the display. This is usually the place where the solder is not making a good connection. Resolder all the point or take to an electronic repair shop and have them perform the task. This most all the time fixes the problem.

Jan 01, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

85 corvette is showing 16.8 volts on voltmeter and dash lights are flickering.We have checked alternator and battery and both are showing 13.8 volts as normal.


16.9 v will blow every bulb in the vehicle and damage any sensitive electronics. You alternator is runing wide open.and not charging. Actually its the regulator in the altrnator. It will cook your battery as well. need replace and battert check. - good luck

Jun 16, 2009 | 1985 Chevrolet Corvette

Not finding what you are looking for?
2001 Ford F150 Styleside SuperCrew Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...