Question about 2000 Mazda MPV

1 Answer

Left rear is sqeaking - 2000 Mazda MPV

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

Several possibilities, You could have worn out brake pads or a brake pad scratcher telling you it is time. You could have bad wheel bearings. If you back into parking spaces till you bump the curb, you could have broken or bent suspension bushings. Could just be one dry shock absorber. Could be an automatic brake adjuster that is set too tight causing brake pad glazing/squeaking. If it happens when you bounce it is suspension. If it happens when you roll its Brake/bearing.

Posted on Sep 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find zirk fittings 1991 rx7 convertible rear end rear sqeaks cant locate zirk fittings


there arent any "zerk" fittings, you need to find out WHERE the squeak is. If its the drive shaft universal joints most drive shaft shops can replace them for you.

Aug 26, 2011 | 1991 Mazda RX-7

1 Answer

Sharp squeaking from rt rear wheel. Might be a bearing but it stops if i apply light brake pressure


your rear brakes need servicing!!Those sqeaking noises are from metal pins within the brake pads. They touch the rotor surface when the pads are worn. Usually when brakes are applied they tend to silence the squeal. Inspect the rear brakes for pad thickness. Hopefully this helpd!!

Aug 14, 2010 | 2004 Toyota RAV4

1 Answer

What are the signs of a failing rear end in 2000 xj8 vdp. i had a sqeak coming from rear so i sprayed some white lithium grease which quited the problem temporarily, but now sqeak is louder and i hear...


First check the diff fluid level. If its right up, then check the drive line. No probs, then check do the brake check, paying attention to the dust covers as well.

Mar 28, 2010 | 2001 Jaguar XJ8

2 Answers

Jeep Cherokee - Sqeaking Undercarriage


If the "sqeak" is more pronoused while going over bumps, then it is most likely a bushing in the front end. Check your fuel tank straps also, they may be loose. Sounds like this are always a pain to locate. Make sure nothing is in the back cargo area. You can also take your foot and shake the exhaust, WHILE THE CAR IS COOLED OFF OF COURSE.
You can also push down on each corner of the vehicle in the front and stand on the rear bumper to try to simulate or isolate the noise. That's all I have for ya. Good luck.

Feb 02, 2010 | 1996 Jeep Cherokee Sport

1 Answer

Rear differential is sqeaking any idea on what it might be


todd stearn check your rear u joint because it

Nov 28, 2009 | 1994 Chevrolet K1500

1 Answer

Cant fint alternaitor


depending on which engine you have.
1.4 & 1.6 as you are stood at the front looking under the bonnet the alternator is at the front left corner near the top.
1.8 & 2.0 it is at the rear left corner near the top
Diesel model it is at the front left near the bottom

Apr 14, 2009 | 2000 Ford Focus

1 Answer

2000 BMW 7 Series Model 728i


When the car is stationary. Push down on the back (Boot or TRunk) as hard as you can a few times & listen for the squeek. It's more common in the rear suspension from my experience. It sounds like the bushings are gone or worn at the top of the suspension struts.
That's if it does squeek. You might not need your suspension replaced just the bushings as they are normally plastic.
Try doing the same by pushing down at the front of the car also as it maybe happening there too.

Dec 15, 2008 | 2000 BMW 7 Series

Not finding what you are looking for?
2000 Mazda MPV Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...