Question about 1996 Nissan Pickup

Open Question

1996 Nissan Pickup cuts out at 2000 RPM's. We replaced all sensors. Now what?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 54 Answers

SOURCE: 87 Nissan pickup

Check the distributer cap and rotor for cracks and make sure the rotor shaft bushings are not worn out

Posted on May 27, 2008

emissionwiz
  • 75005 Answers

SOURCE: nissan ga15 engine idle adjustment locations

The idle speed is computer controled, it is not adjustable, you most likely have sludge in the throttle valve and the idle speed control air bypass valve, clean them with carb spray with the engine running.

Posted on Sep 17, 2008

  • 1 Answer

SOURCE: 000 NISSAN Xterra -- after warming up, loses RPM by 500-1000..... have replaced ignition wires and distributor, checked mass air flow sensor and OK.....

I had a problem on my Nissan Xterra 2000. Symptons sound similar. In my case, it ran fine for a while and then suddenly the engine starts to stumble and lose output. At one point it did not even have enough HP to move. Irregular idling too. Thought it was water in my fuel. Bought water remover from the store and added to gas tank. Problem did not go away. Instead, "Service Engine Soon" light came on. Had to have it towed to the dealer as there was no way the engine could keep up with traffic. Dealer replaced the "Crank Position Sensor" today. Parts $33.00, Labor: $300 (about 3 hrs worth of work). Seems to work fine now but I will wait and see. Dealer also stated that Distributor bearing appears to be noisy and will need to be replaced sooner or later. I will wait for it to go before I fix that.

Posted on May 27, 2009

  • 265 Answers

SOURCE: 1996 Nissan Maxima o2 Sensor Location

check out www.maxima.org

Posted on Feb 05, 2010

  • 68 Answers

SOURCE: 1995 nissan pickup throttle position sensor

ok on a 2.4l on the black/green and white wires use ohm meter and there is no specific spec for that engine just make sure the the resistance changes and there is no dead spots. for the 3.0l black and white wires specs are 1.0-9.0k ohms im guessing the specs are the same either engine. close to full open


Posted on Jul 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my 2000 nissan maxima looses power while driving


Sounds like the maf sensor. Im assuming its throwing a check engine light? Get it read at AutoZone and look up the code. Go from tjefe

Jun 03, 2014 | 2000 Nissan Maxima

1 Answer

1997 nissan bogs down at 200 rpm check engine light is on but dont know the code The truck will sit and idle all day but once put in gear and driven will bog down at 2000 rpm in all gears Was told it was...


Check the fuel pump output. Some will work but not have enough output for the instances you describe. Find a place that can test the fuel pump pressure.

Mar 24, 2014 | 1997 Nissan Pickup

1 Answer

Wont rev 3000 rpm


You can continue replacing parts at random or have a competent diagnosis made to identify probable causes of the problem(s).

Mar 24, 2014 | 1997 Nissan Pickup

2 Answers

Run hard at 2500 rpm 96 nissan pickup 2.4 5 speed


I had a similar problem mine would hit a rev limiter at 3500 rpms. it would blow black sut out of the tail pipe. Ended up being mass air flow sensor/valorem sensor. almost 500.00 from nissan. fixed it though.

May 31, 2008 | 1996 Nissan Pickup

Not finding what you are looking for?
1996 Nissan Pickup Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...