Question about 1998 Suzuki Swift

1 Answer

How do you reset the computer? an air intake sensor has been cleaned.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 8,522 Answers

If the car is working properly, the light should reset itself after driving less than an hour or so. The light can always be cleared with a scan tool, but this may not be necessary. If you want it cleared now, try taking it to your parts store to see if they will clear it for you (autozone and advance and perhaps others offer free scan service).

Posted on Sep 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the engine racing not idoling


Were any sensors disconnected and reconnected or moved (especially an electronic MAF sensor or the intake throttle valve)? If so, the computer idle needs to be reset to a learning mode. Another possibility if nothing was changed and this is suddenly happening is an air leak or false air. Check for any cracks or looseness anywhere along the intake rubber ductwork and clamped joints. Cleaning the parts can help you find it.

Aug 07, 2017 | Cars & Trucks

1 Answer

03 Nissan Altima showing codes P0304,P0102,P0154,P0113 what are they and how do i repair the problems.


Hi Chris.

p0304 = Number 4 Cylinder Misfire Detected

Faulty spark plug 4
Clogged or faulty fuel injector 4
Faulty ignition coil 4
Fuel injector 4 harness is open or shorted
Fuel injector 4 circuit poor electrical connection
Ignition coil 4 harness is open or shorted
Ignition coil 4 circuit poor electrical connection
Insufficient cylinder 4 compression
Incorrect fuel pressure
Intake air leak

The P0304 code means that the cylinder 4 is misfiring or is randomly misfiring. Start by checking for intake leaks an if no leaks are found the next step is to replace the spark plugs on cylinder 4.


p0102 = Mass or Volume Air Flow Circuit Low Input

Faulty mass air flow sensor
Intake air leaks
Dirty mass air flow sensor
Dirty mass air filter
Mass air flow sensor harness is open or shorted
Mass air flow sensor circuit poor electrical connection

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner.
Reset code and drive vehicle.
If the code comes back, it may be necessary to replaced the mass air flow sensor.


p0154 = O2 Sensor Circuit No Activity Detected Sensor 1 Bank 2

Faulty Front Heated Oxygen Sensor Bank 2
Front Heated Oxygen Sensor Bank 2 harness is open or shorted
Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

Replacing the Front Heated Oxygen Sensor Bank 2 usually takes care of the problem.


p0113 = Intake Air Temperature Sensor Circuit High

Faulty Intake Air Temperature (IAT) sensor
Dirty air filter
Intake Air Temperature (IAT) sensor harness is open or shorted
Intake Air Temperature (IAT) sensor circuit poor electrical connection

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.



Hope this helps
FYT

http://www.autocodes.com/make/nissan

Mar 26, 2017 | Nissan Cars & Trucks

1 Answer

Show me location of code po102


This is the Mass Air Flow Sensor. It's a screen-like device located on the air intake line to the throttle body. It measures the flow rate and density of air entering the engine. The code can mean a few possible things:

1. Dirty Air filter
2. Dirty MAF Sensor
3. MAF Sensor wiring problems

Try replacing the air filter first. Remember that engine codes must be reset or they will remain in the computer even after repairs. If that doesn't work you can remove the MAF and clean it with a MAF Sensor approved spray cleaner. If you use the wrong cleaner you will destroy the MAF. If cleaning the MAF don't work, then replacement is indicated.

Nov 07, 2013 | 2003 GMC Yukon Denali

1 Answer

Check engine lght on and 2 codes p0103 and p0112


P0103 HYUNDAI - Mass or Volume Air Flow Circuit High InputPossible causes- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor
Tech notesBefore replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.
P0112 HYUNDAI - Intake Air Temperature Sensor 1 Circuit Low InputPossible causes- Dirty air filter
- Intake air temperature (IAT) sensor harness is open or shorted
- Intake air temperature (IAT) sensor electrical circuit poor connection
- Faulty intake air temperature sensor
When is the code detected?An excessively low voltage from the sensor is sent to ECM.

Jun 08, 2012 | 2001 Hyundai Accent

1 Answer

P0101


P0101: MAF or VAF A Circuit Range/Perf

- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.

Feb 09, 2012 | 1999 Pontiac Grand Prix

2 Answers

My 2001 Malibu seems to have a throttle problem. It sticks at 1500 rpm when at a stop light and will hold at 42 mph when in motion. I had a fuel cleaning service done, tune up, intake gasket, fuel...


are you spraying it in the intake at the throttle valve.if so then you need to clean the throttle valve thoroughly front and back.have you checked the throttle cable for rough spots in it.its more likely its just a dirty throttle valve.

May 22, 2011 | 2001 Chevrolet Malibu

1 Answer

HOW TO FIX ODB FAULT CODE PO113 IAT CKT HIGH INPUT


This Relates to Circuit High Input for Intake Air Temperature Sensor 1
There seem to be several options of engine configuration in this model,as for most Honda.Usually the Intake Air Temperature sensor needs either cleaning with crc sensor cleaner(only use a sensor safe cleaner).If this does not work,it will need replacing.Generally it is located on the air ducting;air cleaner to throttle body.Depending on model it may be close to air filter housing or even on the lower side of the housing.Some are incorporated in with the MAF sensor and wont be listed as a IAT sensor.They are usually a 2 or 3 wire connection,but the MAF combos may have 5 wire connections.Try cleaning the sensor(s) in the ducting and see if the code can be reset or possibly go off after cleaning.I hope this helps you.If not get back with results from this and I will try and remedy for you

Mar 26, 2011 | 2005 Honda Civic

3 Answers

Need to know what MAF means.


MAF stands for mass air flow sensor, this is used to tell the computer how much air is entering the engine, check the air filter,and clean the sensor with CRC mass air flow cleaner, with engine off. hope this helps,let me know Ray

Apr 13, 2009 | Nissan Maxima Cars & Trucks

3 Answers

My 1999 dodge durango is having hard time starting and then won't stay running.


I had a simmilar problem with a RAM the throttle body was dirty.You may try cleaning the intake with a good carb spray.This may not have happened to you but my battery had gone dead and when I replaced it my vehicle would not run well (dying out).I clened the intake and it runs fine.A mechanic told me that when a vehicle loses power (battery)the computer resets and if the intake is dirty the fuelwill not flow well therefore causing the computer to send more or less fuel to the throttle body.Although after cleaning it my o2 sensor needed to be cleaned and reset the check engine light

Mar 09, 2009 | 1999 Dodge Durango

1 Answer

Map sensor 97 plymouth breeze


have you tried resetting the computer if not just take the battery cables off for about 5 minutes (i know kills the radio stations you set and resets the clock)but it resets the computer.try this option and see if this fixes your problem 10 min work. also if im not mistaken thats the same engine thats in a plymouth and dodge neon thanks jeff

Nov 30, 2008 | 1997 Plymouth Breeze

Not finding what you are looking for?
1998 Suzuki Swift Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...