Question about 1992 Lincoln Town Car

1 Answer

How do I change the keyless entry code on my 1992 towncar

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 3,640 Answers

Check out keylessride.com--this may help you. or you can call your local ford dealer to find out how to change code. click on keyless entry remote,

Posted on Sep 10, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Need computer location in 2005 lincoln towncar

The code is on a paper label attached to a large plastic box containing several wiring harnesses behind the driver side door panel. Posts about it being on the trunk hinge arms, behind trunk panels, on computer module, behind the fuse box, and 'you have to go to the dealer' are incorrect for this series of Town Cars. After you remove the panel (you do not need to disconnect any wires), you will see the box up near the rear view mirror. An example code (3/4) (1/2) (5/6) (9/0) (1/2). If you press the keypad buttons in this order,left to right, the door locks will operate in the manner described in your opwner's manual.

Do a search on door panel removal to learn how to remove the panel. There are some good posts on this topic - some even have pictures.

Posted on Sep 06, 2010

greg_margo
  • 1959 Answers

SOURCE: I HAVE A 1992 LINCOLN TOWNCAR HAD IT FOR 8 YRS AND

You can't override/change the keypad code without knowing the original code 1st. Lincoln usually puts the code # on a sticker inside the trunk lid. I've had 3 and all three had the sticker. Open the truck and check just under the lip for the sticker. Apart from getting the code that way, I'm afraid the only other way is to go to the dealer and have them look it up according to the VIN#.

Posted on Nov 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need factory code for keyless entry setup


I fixed you spacebar problem for you!

Here is the video to fix your car. The code is in the truck on the passenger hinge support.

How to locate code to gain entry to Lincoln towncar Continental Grand...

Sep 12, 2015 | Lincoln Town Car Cars & Trucks

1 Answer

2001 lincoln towncar keyless entry wont work


sound like corroded connector at fuse panel or a shorted wire this is a job for a professional mechanic

Feb 24, 2014 | 1995 Cadillac DeVille

1 Answer

1999 Lincoln towncar Keyless entry Control module


try google or the web site for ur car make

Jun 08, 2012 | 1999 Lincoln Town Car

3 Answers

I HAVE A 1992 LINCOLN TOWNCAR HAD IT FOR 8 YRS AND I NEVER HAD THE CODE FOR THE KEYLESS ENTRY PAD IS THERE A WAY I CAN OVERRIDE THE CODE MYSELF INSTEAD OF TAKING IT TO THE DEALER


You can't override/change the keypad code without knowing the original code 1st. Lincoln usually puts the code # on a sticker inside the trunk lid. I've had 3 and all three had the sticker. Open the truck and check just under the lip for the sticker. Apart from getting the code that way, I'm afraid the only other way is to go to the dealer and have them look it up according to the VIN#.

Nov 23, 2010 | 1992 Lincoln Town Car

2 Answers

I have 1992 Lincoln Towncar. I can use the keyless


You probably have a bad hazard switch.

For the code,
1. Look on the deck lid arms for a small tag with the permanent code.
2. If you purchased new, call selling dealer to see if they have it recorded on the invoice.
3. Look in the glove box owner manual package for a credit card size plastic card with the code number.
4. Pay dealer 1/2 hour labor charge to retrieve the code with their diagnostic tool. Confirm price ahead of time.
5. Look on keyless entry module for the tag with the code.

For 1994 town car, module is behind glvoe box. Not sure for 1992, sinnce 94 was a new model design.

Door Lock Control Processor, Electronic Removal and Installation
  1. Drop glove compartment door. Refer to Section 01-05 .
  1. Remove nut on electronic door lock control processor (14B001) bracket assembly.
  1. Remove bracket assembly from RH cowl.
  1. Remove electronic door lock control processor from electronic door lock control processor bracket assembly (2 screws).
  1. To install, reverse Removal procedure.

    Town Car, Crown Victoria/Grand Marquis


Apr 08, 2010 | 1992 Lincoln Town Car

1 Answer

2000 Lincoln Towncar. Keypad on door will not unlock doors. Interior lights do come on. The last two keys pushed simultaneously will occasionally lock the doors. I am using the code printed on a sticker in...


The driver door module (DDM) is connected on the standard corporate protocol (SCP) communication network. The DDM controls many functions including power windows, power door locks and remote keyless entry. The DDM also communicates with the driver seat module (DSM) to control the power mirror and seat memory functions.
Do you know anything about automotive electronic control modules ?
The driver door module (DDM) receives inputs from the digital transmission range (DTR) sensor, ignition switch, seat switch, window/door lock switches, lighting control module (LCM), keyless entry keypad switch and remote transmitter. The DDM outputs consists of keyless entry keypad switch illumination, power door lock actuators, luggage compartment release solenoid, horn relay, and lighting control module (LCM).
Best thing to do would be to have a factory scan tool hooked up to check for DTC'S diagnostic trouble codes . That should be the first step if it's not programming the code.
  • The doors do not lock/unlock using the keyless entry keypad
  • Keypad.
  • Circuitry.
  • Driver door module (DDM).
  • GO to Pinpoint Test L .

PINPOINT TEST L: THE DOORS DO NOT LOCK/UNLOCK USING THE KEYLESS ENTRY KEYPAD CONDITIONS DETAILS/RESULTS/ACTIONS L1 RETRIEVE THE RECORDED RESULTS FROM BOTH CONTINUOUS AND ON DEMAND SELF TESTS Use the recorded DDM DTCs from the Continuous and On Demand self tests.
  • Are any DTCs recorded?
Yes For DTC B1525, GO to L3 .

For all other DDM DTCs, REFER to the DDM Diagnostic Trouble Code (DTC) Index.

No If the door locks are inoperative, GO to L2 .

If the keypad illumination does not operate, GO to L10 .

If the keypad illumination is on continuously, GO to L14 .
L2 CHECK THE DOOR LOCK OPERATION Check the door lock operation by depressing a door lock switch.
  • Do the door locks operate?
Yes GO to L3 .

No GO to Pinpoint Test E . L3 MONITOR THE DDM PID KEY_PAD
Scan tool
Monitor the DDM PID KEY_PAD.
  • Are any of the keyless entry keypad switch numbers present?
Yes GO to L4 .

No GO to L5 . L4 CHECK THE KEYLESS ENTRY KEYPAD SWITCH
Keyless Entry Keypad Switch C525
Monitor the DDM PID KEY_PAD.
  • Are any of the keyless entry keypad switch numbers present?
Yes If 1/2, REPAIR Circuit 78 (LB/YE). TEST the system for normal operation.
If 3/4, REPAIR Circuit 79 (LG/RD). TEST the system for normal operation.
If 5/6, REPAIR Circuit 121 (YE/BK). TEST the system for normal operation.
If 7/8, REPAIR Circuit 122 (YE). TEST the system for normal operation.
If 9/0, REPAIR Circuit 123 (RD). TEST the system for normal operation.

No INSTALL a new keyless entry keypad switch; for additional information, REFER to Keypad-Keyless Entry . L5 CHECK THE KEYLESS ENTRY KEYPAD INPUT WITH THE KEYLESS ENTRY KEYPAD SWITCH Monitor the DDM PID KEY_PAD, while depressing all the keyless entry keypad switches one at a time.
  • Are all the keyless entry keypad switches operating correctly?
Yes GO to L9 .

No GO to L6 . L6 CHECK CIRCUIT 797 (LG/VT) FOR VOLTAGE
Keyless Entry Keypad C525
Measure the voltage between keyless entry keypad C525-7, Circuit 797 (LG/VT), and ground; and between keyless entry keypad C525-8, Circuit 797 (LG/VT), and ground.
  • Are the voltages greater than 10 volts?
Yes GO to L7 .

No REPAIR Circuit 797 (LG/VT). TEST the system for normal operation. L7 CHECK THE KEYLESS ENTRY KEYPAD SWITCH INPUT While monitoring the DDM PID KEY_PAD, momentarily connect a fused (7.5A) jumper wire between positive battery post and keyless entry keypad switch C525 as follows:
    Keypad Button Keyless Keypad Switch C525 Circuit 1/2 Pin 3 78 (LB/YE) 3/4 Pin 4 79 (LG/RD) 5/6 Pin 5 121 (YE/BK) 7/8 Pin 6 122 (YE) 9/0 Pin 1 123 (RD)

  • Are all the keyless entry keypad switch inputs operating correctly?
Yes INSTALL a new keyless entry keypad switch; for additional information, REFER to Keypad-Keyless Entry .

No GO to L8 . L8 CHECK THE KEYLESS ENTRY KEYPAD SWITCH CIRCUITRY FOR AN OPEN
DDM
Measure the resistance between keyless entry keypad switch C525 and DDM as follows:
    Keyless Keypad Switch C525 DDM Circuit Pin 3 C521 Pin 8 78 (LB/YE) Pin 4 C521 Pin 13 79 (LG/RD) Pin 5 C521 Pin 16 121 (YE/BK) Pin 6 C520 Pin 24 122 (YE) Pin 1 C520 Pin 25 123 (RD)

  • Is the resistance less than 5 ohms?
Yes INSTALL a new DDM; for additional information, REFER to Section 419-10 . TEST the system for normal operation.

No REPAIR the circuit in question. TEST the system for normal operation. L9 CHECK THE KEYLESS ENTRY KEYPAD BACKLIGHT Depress a key on the keyless entry keypad.
  • Does the keypad illumination operate correctly?
Yes INSTALL a new DDM. For additional information, REFER to Section 419-10 . TEST the system for normal operation.

No If the keypad illumination does not operate, GO to L10 .

If the keypad illumination is on continuously, GO to L14 . L10 CHECK THE KEYPAD - DDM ACTIVE COMMAND KEYPAD BACKLIGHTING LIGHT ON AND OFF Trigger the DDM active command KEYPAD BACKLIGHTING LIGHT ON and OFF.
  • Does the keypad illumination turn off and on?
Yes INSTALL a new DDM. For additional information, REFER to Section 419-10 . TEST the system for normal operation.

No GO to L11 . L11 CHECK DDM GROUND - JUMPER CIRCUIT 66 (LB) TO GROUND
DDM 522
Connect a fused (7.5A) jumper wire between DDM C522-4, circuit 66 (LB), and ground.
  • Does the keypad illuminate?
Yes INSTALL a new DDM; for additional information, REFER to Section 419-10 . TEST the system for normal operation.

No GO to L12 . L12 CHECK CIRCUIT 51 (BK/W) FOR OPEN
Keyless Entry Keypad C525
Measure the voltage between keyless entry keypad C525-7, circuit 797 (LG/VT), and ground; and between keyless entry keypad C525-8, circuit 797 (LG/VT), and ground.
  • Are the voltages greater than 10 volts?
Yes GO to L13 .

No REPAIR circuit 797 (LG/VT). TEST the system for normal operation. L13 CHECK CIRCUIT 66 (LB) FOR OPEN Measure the resistance between keyless entry keypad C525-2, Circuit 66 (LB), and DDM C522-4, Circuit 66, (LB).
  • Is the resistance less than 5 ohms?
Yes INSTALL a new keyless entry keypad switch; for additional information, REFER to Keypad-Keyless Entry .

No REPAIR Circuit 66 (LB). TEST the system for normal operation. L14 CHECK THE KEYPAD ILLUMINATION - DDM DISCONNECTED
DDM C522

  • Does the keypad illumination turn off?
Yes INSTALL a new DDM; for additional information, REFER to Section 419-10 . TEST the system for normal operation.

No GO to L15 . L15 CHECK KEYLESS ENTRY KEYPAD FOR SHORT TO GROUND
Keyless Entry Keypad C525

  • Does the keypad illumination turn off?
Yes GO to L16 .

No INSTALL a new keyless entry keypad switch. For additional information, REFER to Keypad-Keyless Entry . TEST the system for normal operation. L16 CHECK CIRCUIT 66 (LB) FOR SHORT TO GROUND Measure resistance between DDM C522-4, circuit 66 (LB), and ground.
  • Is resistance greater than 10,000 ohms?
Yes System OK. CLARIFY the concern with the customer.

No REPAIR circuit 66 (LB). TEST the system for normal operation.

Nov 03, 2017 | Lincoln Town Car Cars & Trucks

1 Answer

How do you reprogram the keyless door lock code?


  1. Enter the five digit permanent entry code into keyless entry keypad.
  2. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code. (Factory code found on the module).
  3. Enter any alternate five digit code within five seconds of pressing 1/2 button.
    • Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code: 9/0-- no memory recall
      1/2-- memory seat position 1
      314-- memory seat position 2
      5/6-- memory seat position 3
    • After successful programming, the doors will signal by locking and then unlocking.

The Keyless Entry Module is located inside the drivers side door.

Jun 21, 2009 | 1985 Lincoln Town Car

2 Answers

I need to get keyless entry numbers


the keyless entry code is on a plastic "credit card" in the owner manual packet. This is the permanent code and can be changed by you, following the directions in the owner manual.

Your selling dealer probably recorded the codes in your sales folder. Also, you can go to any Ford dealer parts dept with ID and proof of ownership and they can get your code from Ford using your 17 digit VIN number.

May 04, 2009 | Ford Taurus Cars & Trucks

3 Answers

CHANGE CODE ON KEYLESS ENTRY SYSTEM FORD EDGE


Yes you can program your own code by inputting the original code then hit the no. 2 button then input your own 5 digit code.

Mar 16, 2009 | 2007 Ford Edge SEL Plus

1 Answer

Nissan maxima keyless entry


Find the location of the computer, it should have a set of numbers in a tag which is the original factory code.

Oct 29, 2008 | 1992 Nissan Maxima

Not finding what you are looking for?
1992 Lincoln Town Car Logo

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

fordexpert

Level 3 Expert

5687 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...