Question about 2003 Honda CR-V

Open Question

I need to change the Starter. Looking for How to Hints

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replacing a starter on an 83 s-10

Its not that hard. The hardest part is getting to the small wires on top of the starter. Just take your time.

Jun 15, 2014 | 1983 Chevrolet S-10

1 Answer

Hi I own a 2008 Dodge Caliber. It would not start . The lights were very strong and horn worked. The power locks would. My husband was told to take battery ground cable off and let it sit for 1 minute to...

That's baloney (?bologna?) with the negative cable re-setting.
First, let me ask by not start, do you mean it cranks and won't start, or it won't even crank the engine over?

If it cranks and won't start, suspect a gas or spark problem. Check the fuel pressure and the injector circuit for a fuel problem, then check the ignition circuit for a spark problem.

If it won't even crank the engine over, it could be a wiring problem going to the starter, or it could be a bad starter motor or starter solenoid (that is attached to the starter). After all, the starter that is in the car is now 9 years old (if never changed), and that could be the problem. Usually they give some hints when they begin to go bad, like slow acting, but not always.

Oct 26, 2017 | 2008 Dodge Caliber

1 Answer


Go here for helpful hints with pictures.

Nov 01, 2012 | Pontiac Cars & Trucks

1 Answer

2008 Lucerne won't start.

check fuel presure if its good check for security light/codes

Dec 19, 2011 | 2008 Buick Lucerne

2 Answers

Truck doesnt start battery is good, cables are good. crossed the two connections on solniod and starter spins but dosnt engadge flywheel. is it my statrer and if so hoe can i get it to work one last time...

Teeth could be broken on overrunning clutch on starter. If you cant get the starter to engage you will not be able to get the engine turned over.

Jan 15, 2011 | 1991 Nissan Pickup

2 Answers

My 2003 Ford explorer has a Ford remote starter and it

no take it 2 dealer ask a mechanic if theres a trick or does it need to be re proged

Jan 13, 2010 | 2003 Ford Explorer

3 Answers

How do I change the starter in a 2000 Nissan?

you will have to remove the battery, the air intake assembly and air filter housing for access to the starter which goes into the flywheel on the transmission to the right of the motor when looking under hood from front of car. you will probably need a variety of extensions and a universal joint for your sockets will help reaching the mounting bolts easier.

Jun 27, 2009 | 2000 Nissan Maxima

1 Answer

Starter replacement

Removed top of motor, disconnected the hoses got to the starter, removed it without difficulty

Jan 15, 2009 | 1991 BMW 3 Series

Not finding what you are looking for?
2003 Honda CR-V Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides