Question about 2004 Chevrolet Monte Carlo

1 Answer

Front and rear caliper mounting bracket torque specifications

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

Hi, The Brake Calipers Torque at 70 Foot Lbs.

Posted on Sep 10, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 135 Answers

SOURCE: torque for front brake caliper bracket.

63 ft-lbs

Posted on May 19, 2009

MrSocket
  • 117 Answers

SOURCE: 2001 mercedes Ml430 torque specifications front

Your public library will have a manual covering your mechanical repair. Moreover, they have the automotive shops online software called AllData. It is the best auto technician database available today. You can print out specific troubleshooting procedures, diagrams, step-by-step istructions, and soforth. The typical person cannot afford to pay for this service, just automotive dealerships, etc... that is why the public library made it available to everyone and for free to view and print out material. This should Fixya! Good Luck!

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Kia Optima Brake Torque Spec


Bracket bolts Front 16-24 ft/lbs
Caliper bolts Front 51-63 ft/lbs Rear 16-24 ft/lbs

Feb 03, 2017 | 2004 Kia Optima

1 Answer

2004 chevy malibu classic caliper torque


caliper mounting bracket bolts torque 85 ft lbs torque caliper bolts 26 ft lbs..

Jul 06, 2013 | Cars & Trucks

1 Answer

Chrysler caliper bracket


you will need the rotors, calipers, brackets, and pads off of a 300c

Apr 28, 2013 | Cars & Trucks

1 Answer

On my 1996 land rover seems like my front driver brakes are loosing the senor how can I tell for sure?


Check this procedure...
1. Check wheel lug nut torque and tighten evenly to specification.
2. Check the brake rotor for trueness and thickness variations. Replace the rotor if it is too thin, warped, or if the thickness varies beyond specification. Some rotors can be machined; consult the manufacturer's specifications and recommendations before using a machined brake rotor.
3. Check the brake caliper or caliper bracket mounting bolt torque and inspect for looseness. Torque the mounting bolts and inspect for wear or any looseness, including worn mounting brackets, bushings and sliding pins.
4. Check the wheel bearing for looseness. If the bearing is loose, adjust if possible, otherwise replace the bearing.

Before Removing the Brake Rotor from the vehicle it should be tested for warpage.

Use a Dial Indicator for checking to see if the rotor is warped. Anything over .003 can be felt as pulsation in the foot pedal as it double when you add the other side of the rotor and then add the opposite rotor. Replace rotor If it reads over .003

Keep us updated.

Mar 23, 2011 | 1996 Land Rover Discovery

2 Answers

How to change brake pad and check rotors


Brake Pads Removal & Installation Front for_car_toy_cam_02-04_sst_frt_dsc_asm.gif

To Remove:
  1. Drain brake fluid to ½ full level in reservoir.
  2. Remove the front wheels. toy_car_cam_frontbrakepads.gif

  3. Remove the front brake caliper assembly.
  4. Remove the 2 anti-squeal shims from each of the 2 brake pads.
  5. Remove the wear indicator from each of the 2 brake pads.
To Install:
NOTE: When replacing worn pads, the anti-squeal shims must be replaced together with the pads.
toy_car_cam_frontbrakepads.gif

  1. Using a large C clamp or equivalent press piston into the caliper.
  2. Apply disc brake grease to the inside of each anti-squeal shim.
  3. Install the anti-squeal shims on each pad.
  4. Install the pad wear indicator clip to the pads.
  5. Install the pads with the pad wear indicator plate facing upward.
  6. Install the brake caliper with the 2 mounting bolts. Torque the bolts 25 ft-lb (34 Nm).
  7. Install the front wheels.
  8. Fill the master cylinder with new clean brake fluid.
  9. Pump the brake pedal several times to seat the brake pads.
Rear TMC made rear brake components toy_car_cam_tmcrearbrakes.gif

TMMK made rear brake components toy_car_cam_tmmkrearbrakes.gif

To Remove:
  1. Drain the brake fluid to ½ full level in reservoir.
  2. Remove the rear wheels.
  3. Remove the caliper slide pins.
  4. Remove the caliper slide pin bushings (TMMK made) (Kentucky).
  5. Remove the rear brake calipers.
  6. Remove the 2 brake pads with the anti-squeal shims.
  7. Remove the anti-squeal shims and pad wear indicators from brake pads.
To Install:
  1. Using a large C clamp or equivalent press the piston into the caliper.
  2. Coat both sides of the outer anti-squeal shim with pad grease.
  3. Install anti-squeal shims to each pad.
  4. Install wear indicators on the 2 brake pads.
  5. Install the caliper slide pin bushings (TMMK made) (Kentucky).
  6. Install the rear brake caliper with the slide pins. Torque the slide pins as follows:
    • TMC made (Japan): Torque the caliper slide pin 25 ft-lb (34.3 Nm)
    • TMMK made (Kentucky): Torque the caliper slide pin 34 ft-lb (47 Nm)
  7. Fill the master cylinder with new clean brake fluid.
  8. Pump the brake pedal several times to seat the brake pads.
  9. Install the rear wheels.
prev.gif next.gif Brake Rotor Removal & Installation Front To Remove:
  1. Remove the front wheels.
  2. Remove the front brake caliper assembly.
  3. Remove the front brake pads.
  4. Remove the 2 bolts and caliper mounting bracket.
  5. Place match marks on the disc and axle hub.
  6. Remove the front wheel disc.
To Install:
  1. Align the match marks and install the front disc.
  2. Install the brake caliper mounting bracket. Torque the bolts 79 ft-lb (107 Nm).
  3. Install the brake caliper. Torque the bolts 25 ft-lb (34 Nm).
  4. Install new gaskets and connect the brake hose to the caliper with the banjo fitting bolt. Torque the fitting bolt 22 ft-lb (29.4 Nm).
  5. Fill the reservoir with brake fluid.
  6. Bleed the brake system.
  7. Install the front wheel.
Rear To Remove:
  1. Remove the rear wheels.
  2. Remove the brake caliper assembly.
  3. Remove the brake pads.
  4. Remove the 2 bolts and the caliper mounting bracket.
  5. Place match marks on the disc and axle hub.
  6. Remove the rear disc.
To Install:
  1. Align the match marks and install the rear disc.
  2. Install the rear brake caliper mounting bracket. Torque the bracket bolts as follows:
    • TMC made (Japan): Torque the bracket bolt 46 ft-lb (61.8 Nm)
    • TMMK made (Kentucky): Torque the bracket bolt 34 ft-lb (47 Nm)
  3. Install the rear brake caliper with the slide pins. Torque the slide pins as follows:
    • TMC made (Japan): Torque the caliper slide pin 25 ft-lb (34.3 Nm)
    • TMMK made (Kentucky): Torque the caliper slide pin 32 ft-lb (43 Nm)
  4. Install new gaskets and connect the brake hose to the caliper with the banjo fitting bolt. Torque the fitting bolt 22 ft-lb (29.4 Nm).
  5. Fill the reservoir with brake fluid.
  6. Bleed the brake system.
  7. Install the rear wheel
prev.gif next.gif

Jan 25, 2011 | 2007 Toyota Camry

2 Answers

Could you tell me the procedure for removeal ands reinstall new braek pads to the rear disks. thank you Dave m


Here are some procedures you can follow to replace the brake pads. 1. Clamp the rubber lines with vacuum line clamps. You can get these at your local auto parts store. 2. Loosen the bleeder screw with the proper size wrench. 3. Loosen and remove the lower caliper to bracket bolt. 4. With the proper tool, and using a pan to catch the fluid, compress the piston in. Tighten the bleeder screw. 5. Side the caliper off and remove the old brake pads. 6. Loosen and remove the caliper mounting bracket(this is the part that the brake pads slide back and forth on). 7. Remove the rotor and have it measured and resurfaced if it is thick enough. Please keep in mind that rotor thickness can have an impact on brake performance as well as a safety issue. If it is too thin, replace them. If you just slap pads on you,could possibly get a squeal or other undesirable noise from the brakes. 8. Clean and lubricate the slide pins and bracket with some caliper grease. 9. Reinstall the rotors. 10. Remount the caliper mounting bracket, and with a torque wrench, tighten the bolts to proper specs. You can get the torque specifications from the parts store as well or a shop that does brake service. 11. Reinstall new brake pads. I usually put the pad with the metal sensor on the inside and on the bottom. 12. Remount the caliper and tighten the bolts to proper specification. 13. Loosen the bleeder screw, and with the help of an assistant, bleed the air from the system, making sure the master cylinder does not go dry. You will know if there is no more air in the system if there are no air bubbles coming from the bleeder screw as well as the firmness of the brake pedal. Make sure you have plenty of brake fluid on hand. There might be a sequence in which you have to bleed the system. You can get that from the parts store or shop as well. The sequence is usually right rear, left rear, right front, left front. 14. Mount the wheels, torque them to proper specification. Also, inflate the tires to proper pressure. Low tire pressure can cause a pulling effect. There you have it and good luck.

Oct 16, 2010 | 1991 Daihatsu Charade

2 Answers

Brake job torque spec


Caliper bolt 25 ft lbs/ caliper bracket bolt 79.6 ft lbs

Nov 13, 2009 | 2005 Honda Civic

1 Answer

Torque setting for brake caliper mounting bracket


according to manual,
front caliper mounting bolts are 11 ft lbs
rear caliper mounting bolts are 220 inch lbs.

Jul 02, 2009 | 2005 Jeep Liberty

1 Answer

Need the correct torque specs for 2004 silverado 1500 calipers


  • Tighten the 2 brake caliper mounting bolts to 108 Nm (80 ft. lbs.) . Caliper Mounting Bracket to Knuckle, Front (15 series) 175 Nm (129 ft. lbs.) Caliper Mounting Bracket to Knuckle, Front (25/35 series) 300 Nm (221 ft. lbs.) Brake Caliper Mounting Bolt Rear (15 series) 42 Nm (31 ft. lbs.) Brake Caliper Mounting Bolt Rear (25/35 series) 108 Nm (80 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JC5/JH5) 200 Nm (148 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JH6) 165 Nm (122 ft. lbs.) Caliper Mounting Bracket Bolt Rear (JH7) 300 Nm (221 ft. lbs.) Caliper Mounting Bracket Bolt Rear (NYS) 200 Nm (148 ft. lbs.)
    hope this helps
  • Mar 28, 2009 | 2004 Chevrolet Silverado

    Not finding what you are looking for?
    2004 Chevrolet Monte Carlo Logo

    220 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8210 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...