Question about 2000 Hyundai Accent

1 Answer

I'm replacing the timing belt for the 2002 Hyundai Accent and I'm not sure of the timing marks to set. The car will not start and I think it is off center? Can you help with specifics?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 642 Answers

Line up the crank as indicated. There are 2 marks on the cam as indicated on the diagram. Make sure either one lines up. When fitting the belt keep tension on the front portion of the belt when fitting. Once on and tensioned rotate the crank twice by hand/wrench to check if it catches anywhere and then check the alignment again.

Posted on Sep 10, 2010

  • Rene Rossouw
    Rene Rossouw Sep 10, 2010

    Whoops!! Here's the diagram *blush*


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai accent GVS timing belt given off


if the timing belt is broken it is very likely that engine damage will have occured ( bent valves)

Jun 12, 2010 | 2002 Hyundai Accent

1 Answer

Changing timing belt on hyundia accent


Make sure the crank pulley is lined up with the top dead center mark. The make sure the crankshaft is lined up with its mark. Its easier if you can line the marks up before you take the old belt and try not to move the crank shaft are cam pulley.

Apr 17, 2010 | 2002 Hyundai Accent

2 Answers

Need set timing.


2005 Hyundai Accent. I replaced the timing belt, I get sparks, but won't start? Thanks.

Mar 24, 2010 | 2005 Hyundai Accent

1 Answer

2002 hyundai accent DL sedan. my tension pulley


hi from uk to retime cambelt is as follows = the crank cog has a mark which lines up with corresponding mark on front of engine block mark is approx 12-30 o/clock this is TDC No 1 the the cam cog has a small drilled hole in one of the webs just below the cog teeth ? this hole has to be at 12-o/clock position and then using a small mirror if you look through this hole you will see a vertical notch on the front of block this is theTDC mark for cam you then fit belt anticlockwise from c/shaft to cam then round tensioner then release tensionor to tension belt and then lock it up torque both bolts 20 - 27Nm rotate engine manually 4 complete turns clockwise then recheck marks ok /re align ? then re assemble crank pully bolt torque is 140 -150 Nm may i just inform you? that your engine is what is known as interferance that is to say in event of c/belt failure there is more than likely valves to piston contact however this can also occure too if miss timed belt fitted and engine has tried to start ? a compression test on cylinders will confirm if this has happened or not ? hope this helps

Mar 16, 2010 | 2001 Hyundai Accent

1 Answer

2002 Hyundai Acent 1.5 sohc,need info on cam timming


didnt you mark it before you removed the old belt??

Nov 01, 2009 | 2002 Hyundai Accent

2 Answers

How do i set timing marks on hyundai accent 1.5 eng


how do i set timing on 1999 hyundai accent an which one is the number one cylinder.?

Oct 02, 2009 | 2002 Hyundai Accent

2 Answers

Timing belt on my 2002 hyundai accent 1.6 liter 4cyl


DID THE BELT BREAK AND THEN IT WAS CHANGED. If so then you may have bent valve. IF NOT then vehicle may be timed wrong. Here is a diagram of your timing marks, http://www.2carpros.com/car_repair_information/tec_info/2002/hyundai/accent/2002_hyundai_accent_timing_belt_diagram_marks.htm contact if you need more help. Thanks for using FIX YA

Jan 23, 2009 | 2002 Hyundai Accent

2 Answers

2002 Hyundai Accent Problem


first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
later paul

Sep 28, 2008 | 2000 Hyundai Accent

2 Answers

Assent 2002 timing


try Hyundai.com...maintenance manual available in online form

Aug 07, 2008 | 2002 Hyundai Accent

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...