Question about 2000 Ford Ranger SuperCab

1 Answer

It will not go to 4hi or 4low - 2000 Ford Ranger SuperCab

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have the same type problem and think I've got it narrowed down to the splines in the front axel. A friend said Ford used a hard plastic kind if spline which commonly strips out . I am going to warren manual lock ins and see how long that lasts. This model of 4wd is one of fords poorest designs and know of several ppl who have experienced the fantasy 4wd effect such as i have
My first 4wd and the damn thing doesn't work. Go Figure huh! LOL hope this helps

Posted on Oct 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 chevy trailblazer won't go into 4 wheel drive


Have you had codes checked ? While connected to a good scanner that will check transfer case switch to show if switch is working, and it could be the switch on the side of the transmission.

Feb 10, 2014 | Cars & Trucks

1 Answer

2000 chevy suburban stuck in 4 lo anyone out that cant help


Put truck in Neutral while key in run position engine off or on (doesn't matter which). If it's pushbutton 4wd then try hitting 4low again. if that doesn't work some of the chevy trucks required you to press 4hi to get into 4high and then press 4hi again to get back to 2hi, unless yours has a 2hi button. In that case press 4hi to get into 4high and then press 2hi to get back to 2wd. either way you need to be in neutral to get out of 4lo. I have shift on the fly (Mechanical Shifter on floorboard for transfer case) on my 1990 Suburban and still have to put it in neutral to get out of 4lo. Good Luck.

Jan 30, 2014 | 2000 Chevrolet Blazer

1 Answer

I have a 98 GMC Sierra and the 4wd buttons were all screwed up so I bought the transfer case encoder motor and now my 2wd and 4low works fine, but when I push the 4hi nothing happens. If truck is in 4low...


Ok, I fixed it. I just reset the computer by taking the pos and neg cables off the battery and after 15 secs touching the two together. Now everything works fine.

Dec 30, 2009 | 1999 Chevrolet Tahoe

1 Answer

95 chevy blazer 4low works..but when shifting into


My guess is that it is probably the actuator on the front diff. It may also be the buttons. I had the same problem with my 1999 silverado which it turned out to be the actuator.

Dec 14, 2009 | 1995 Chevrolet Blazer

1 Answer

4hi is not working


try seeing if the cable going to the front differental is pulling in to engage the front axle?

Apr 24, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

94 Sonoma 4x4 won;t lock into 4WD.


yea its not shifting again like before ? sounds like your transfer case solonoid has possably gone bad again .. these are a sometimes dont work item .. It is what shifts the transfer case into gear and it might be a little worn or weathered and not letting the switch kick it in gear all the way from the N position. thanks Jerry holler if you need more.

Feb 05, 2009 | 1994 GMC Sonoma

2 Answers

95 chevy k3500 will not shift into 4hi


Hi ..i had the same same problem in my k3500,check 4x4 fuse first .if thats blown replace it if blows when you put in 4x4 go under the car and unplug the actuator at the front diff.go back in the cab and put another fuse in, shift into 4x4 if the fuse does not blow this time you will need a new actuator.
thats what happened with mine and now 4x4 is sweet.i thought mine worked to at the start until i got bogged and noticed my front wheels wernt turning.

Jan 24, 2009 | 1995 Chevrolet K3500

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...