Question about 2008 GMC Acadia

1 Answer

My Acadia 2008 stopped suddenly ,, battery Ok ,, but the engine cannot turn on again I brought many technical guys but no point ,, still when I turn the key on only For your info. The oil is expired ( remaining 100% ) , What is the reason you think , I can not give to any workshop I let he try & try till destroyed my car ,, If the oil expired may the engine stopped automatically ? Thanks for your help Saqer L999220@hotmail.com

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 339 Answers

{: ) A few of the many possible reasons I can think of : ignition switch, engine fuseblock, ECT sensors, engine control module, TDM, wiring ..... When you said you brought many technical guys, i presume they didint miss checking the oil, and fuel pressure, and coolant. I dont think an expired oil life reading can stall your vehicle. Actually, if the oil life remaining reads 100%, you are still very far to servicing your engine oil. The counting is from 100% going towards 0%. I suggest a scan tool readout, it wont hurt your car much. Just to trim down some of the guessing games, and get a clearer view.

Posted on Jun 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset computer on 2008 GMC Acadia


I would stop using it & check for codes

A blinking dash light (MIL Lamp) could be a
converter ruining cylinder misfires

Not much gets reset,all your do is clear data & the
light comes back, until you find & resolve problems

Sep 07, 2014 | 2008 GMC Acadia

1 Answer

My check engine light came on after I failed to close gas cap tightly on my 2008 Acadia, how do I reset computer


It should reset itself after a few start/stop cyles.
If not, or you're in a hurry, find the ECM fuse and pull it out, wait a few seconds and replace it.

Sep 07, 2014 | 2008 GMC Acadia

1 Answer

Battery keeps dying on my yamaha cygnus scooter


Test and replace battery if ok test output voltage with engine running if none or low replace stator winding

Mar 05, 2014 | 2008 GMC Acadia

1 Answer

Acadia engine overheating during stop


CHECK BELT IS TIGHT AND NOT SLIPPING, CHECK FAN IS COMING ON WHEN IT GETS HOT

Jan 24, 2014 | 2008 GMC Acadia

1 Answer

Have a 2008 Acadia. Drove 3 hours from home, some mountains, and stoped for lunch. Came out to find coolant under car. Drove up the street to auto shop( which was closed) and car began to overheat at...


check the water pump. it may be leaking out relief hole on bottom of water pump while running. it could have failed just before you stopped for lunch! good-day but if pump is ok while it runs. put a new thermostat in it.

Aug 28, 2011 | 2008 GMC Acadia

1 Answer

Where is the location of the fog light switch on a 2008 acadia?


Hi, viewers! For the 2008 acadia, the fog light switch is located on the main healmp switch rotary knob. Just press the center of the round knob to turn on fog lamps, and press again center to turn it off. 0kay? Have a nice day! : )

Feb 08, 2011 | 2008 GMC Acadia

1 Answer

Where is the fog light switch located on a 2008 acadia?


Hi, viewers! For the 2008 acadia, the fog light switch is located on the main healmp switch rotary knob. Just press the center of the round knob to turn on fog lamps, and press again center to turn it off. 0kay? Have a nice day! : )

Feb 08, 2011 | 2008 GMC Acadia

1 Answer

How do you replace the front amber running light in a 2008 GMC Acadia


Turn off engine and open the hood
Remove the front wheelhouse liner. Whichever side, say we begin with the front left(drivers). If you dont wish to remove the front left tire, just turn the wheels far to the right to gain enough clearance. And you dont need to remove the whole liner and all the screws and retainers. . Just remove only those nearest the headlight and front bumper area in order to loosen the front half portion of the wheelhouse liner. Just enough for your arms to reach inside.
At this point, try to reach in for the rear of the running lamp. Work your hands inside to remove the lamp from its socket. Note the position before turning and pulling it out.

Note: If you still need more clearance for better access, you can (1) remove the tire. or (2) remove the 3 screws that secure the bumper to the body, and then pull outwards to loosen.Try to reach in again.
Just need some patience, though. goodluck. okay? : )

Jan 14, 2011 | 2008 GMC Acadia

1 Answer

Where is the power steering reservior in a 2008 GMC Acadia? Owner's manual points(and indicates) passenger front, but I don't see anthing there. Is it hidden under some sort of cover, like the radiator...


Hi, viewer! The steering pump reservoir is on the right side area of the engine but is concealed underneath the top engine dress cover. Remove first the engine oil cap, turn it conterclockwise to loosen out. Then pull the engine dress cover upwards from side to side. There are no bolts, and there are only 2 clips holding the cover from below. Just pull carefully upwards with enough force to detach . And don't forget about the oil cap when fixing it all back. okay, sir? : )

Sep 05, 2010 | 2008 GMC Acadia

1 Answer

I have a 2008 chevy impala. The car suddenly


ur vehicle is in limp mode[ a safe mode ] which will get u home trying not to cause any damage to engine --theirs a few reasons the vehicle will do this-low oil pressure-transmission problem-have vehicle scanned most auto stores such as auto zone / advanced auto [check ur local area]do this service for free the code gives u a start point towards resolving ur problem

May 11, 2010 | 2008 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...