Question about 1998 Pontiac Grand Prix

1 Answer

Devilwoman121103@yahoo.comblower fan only works on high usually and sometimes works on other settings but when it wont work on other settings it shuts a/c button off and daytime running lights wont work either and you hear a click in a white box under dash. is there a relay or something that could be causing this because i tried a different a/c control panel and that didnt help and i think the white box is for the day lights but how do they effect each other

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Good Evening, the blower mainly working on high is normally a blower motor resistor located under the dash in the passenger footwell area a short distance from the blower motor. It is held in with 2 bolts and I would recommend if you replace it that you have a 1/4" swivel socket in between your socket and the extension to do it. Try that I'm sure it will work.
Thanks,
Joey

Posted on Sep 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan wont blow at any speed


Blower fan needs to be replaced. You can sometimes get it to start by tapping the cowling under the dash [center area] with a rubber mallet [while ignition on and fan set to high. This will likely only work until it 's shut off again and the motor still needs to be replaced. This only verifies that it is in fact a bad motor and not a bad switch or resistor.
Replacement motors can be found on eBay and amazon for like $40.

Oct 07, 2013 | 2004 Buick LeSabre Custom

1 Answer

Why wont my a/c or heater fan come on?


When the blower works only on the high setting its usually a bad blower resistor which is right near the blower motor. now you say it would always blow high regardless of the fan speed setting that would indicate probably the climate control unit or a connector problem somewhere. finally it not working at all may be the climate control unit or connection went bad even further. it might have a blown fuse or a bad blower motor in addition to the climate control unit or connector problem .check for power and ground at the blower motor. the power is supplied from fuses and may have a relay also. the ground is supplied from the climate control unit and goes through the resistor to control the fan speed. good luck

Oct 30, 2011 | 1997 Lincoln Continental

1 Answer

Gmc 2006 Sierra fan switch was not working on all settings now after being set on high it would not shut off then it stopped but smoke began coming out from under the passenger side dash


There is a resistor board in there that controls the voltage to the blower fan. When the resistor dies the fan only runs on high. The bad part is it overheats the wires and starts burning things. You will probably need a socket and pigtail too. Both available from the dealer. Usually not very expensive and you can do it yourself.

Feb 03, 2011 | 2006 GMC Sierra 1500 2WD

1 Answer

When i turn the air on in the front it wont work.but if i turn it on in the back it works just fine.sometimes i can kinda hear it come out the front but nothing is comming out


If you mean you can't hear the fan running in the front, but can hear it run in the back? I think thats what you're saying. There are 2 separate fans. If the front fan works on high speed only, its the blower resistor at fault, usually has a burnt resistor. If no fan speed on any settings, then the front blower motor is faulty. both are common problems. Both are assessable under the passenger side dash, behind lower panel. Find the blower motor and check for power on the purple wire and good ground on the black wire (test light if available) if good power, needs blower motor.

Jan 25, 2011 | 2004 Pontiac Montana

1 Answer

Heater & cooling fan only works on high.Power locks don't work.


there is a resistor for the heating and cooling fan speed. this controls the amount of voltage to your fan, which controls the speed. usually when the fan only works on high it will bypass the resistor and use the full 12 volts for the high setting. your power locks might be part of this circuit. i would check the resistor first then check the locks. usually the resistor is behind the high low switch

Mar 26, 2010 | 2000 Pontiac Montana

1 Answer

My fan/blower won't run on high setting. It works


Replace relay under blower motor, under hood.

Jun 25, 2009 | 1993 Buick LeSabre

1 Answer

Climate control switch does not work in lower modes only in high.


The pontiacs have an issue with the ignition switch, I have a 2001 grand prix that did the same. The ac fan would only work on 5 and the headlights would go off if on 1-4 replace the switch and all is fine.

Jun 02, 2009 | 2003 Pontiac Grand Prix

3 Answers

A/c fans wont blow


If the fuse is blown for the blower then there is a short, that is not an answer, go to the blower and check to see that the blower motor connector has 12 volts to it when the blower is set to high speed on control, if it does then u need a new blower motor, if it doesn't then the control switch is defective or the blower motor speed control resistor is defective.

May 13, 2009 | 2000 Mercedes-Benz S-Class

1 Answer

H/c fan stopped woking


loose contact on heater matrix and try swoping the switch on the door for the window

Mar 03, 2009 | 1997 Chevrolet Astro

Not finding what you are looking for?
1998 Pontiac Grand Prix Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...