Question about 1986 Toyota Pickup 4WD

1 Answer

How do u get the hub off of a 1986 4x4 toyota pickup????or do i have to take the hub off????i need to change the rotors......

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

This Guide Will Help
It Shows You everything you need to know. I had this truck its a beast and loved it but it wouldn't hold all the kids.
Take Care,
Michael Scott

Posted on Sep 10, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to change a front wheel bearing on a 2007 toyota tacoma 2 wheel drive pickup truck

The bearing & hub is a whole assembly for this model, start by removing the brake calipers, the removing the rotors" a couple taps with the hammer should loosen it" , after removing the rotors the hub & bearing assembly is held on by 4 #17 bolts, after you get the hud and bearing assembly off you will need a tool called a bearing split plate ,to split the hub and bearing off each other. Now you should have the new bearing assembly ,inner wheel seal, and hub set together" this is when you need a press". Press the hub onto the new bearing assembly.And thats it! Its ready to go back on the way you took it off.

Mar 02, 2013 | Cars & Trucks

1 Answer

Just bought the truck 4 wheel drive front brakes are worn out looks like hub and rotor are all one piece you pull the cap of where you make it free wheel and 4 wheel and then take a nut off inside to take...

No the bearings are not the "sealed bearing" type. they come out and can be repacked. You will need a new inner grease seal as well. Most of the time the outer gaskets are steel gaskets (If they have not previously been changed). I usually just put a THIN coating of silicone on them and reuse them. It depends on your particular hub and rotor assembly - some of the rotors will unbolt from the inside of the hub and can be replaced separately. According to the picture (below) the hub and rotor is serviced as an assembly, but don't take this to heart. AutoZone lists the rotor separately from the hub - CLICK HERE


May 20, 2011 | 1992 Toyota Pickup

1 Answer

How do u remove the front rotor on an 83 toyota pick up truck?

Take the brake calipers off, the caliper mount(if applicable) and then hit the sides of the rotor with a heavy hammer until the rotor frees itself.....UNLESS you have 4 wheel drive, then you must disassemble the hub assembly.

Hope this helps
Positive Feedback ALWAYS Appreciated :)

Mar 04, 2011 | 1983 Toyota Pickup

1 Answer

How do I remove the front brake rotors?

Take the brake calipers off, the caliper mount(if applicable) and then hit the sides of the rotor with a heavy hammer until the rotor frees itself.....UNLESS you have 4 wheel drive, then you must disassemble the hub assembly.

Feb 06, 2011 | 1983 Toyota Pickup

2 Answers

1. Need to know how to disassemble the 4X4 front hubs to replace rotors in a 1993 Toyota 4X4 small pickup truck. 2. I am also replacing clutch, pressure plate, throw-out bearing, and ffy-wheel. I need to...

Auto parts stores have manuals specific to your model truck. It will have all the step by step procedures in it with pictures and torque spec's too.

Oct 30, 2017 | Toyota Pickup Cars & Trucks

1 Answer

Remove front rotor ?

As I was saying, remove tire, remove brake caliper, and pull the hub by removing the large nut from the axel with rotor attached.
Look on the back of the hub assembly and you will find bolts that hold the rotor on, remove them and take off rotor.
Please let me know how it goes.

Feb 07, 2010 | 1992 Toyota Pickup

1 Answer

1990 6 cyl. pickup (Toyota). removed rotor and wheel hub...cannot seperate rotor from there another retention ring on the hub?

not sure on this ,look carefully because it might be a complete unit ,if their isnt two screws on the front of the brake disk then its a complete unit ,Have you bought the disks yet?? check them out if you have to look for the answer

Nov 15, 2009 | 1990 Toyota Pickup

1 Answer

Removing rotor on a 1991 toyota 4x4 pickup

You have to take apart the 4x4 hub to get to the lock nut for the bearings then you have to reome the hub and rotor assy,then you have to press the wheel studs out to remove the rotor,then reverse the process.

Mar 29, 2009 | 1991 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides