Question about 1997 Ford Mustang Cobra
Posted on Sep 10, 2010
Testimonial: "WOW this is exactly the information I was looking for and I got a reply with in 5 Minutes FixYa.com Rocks."
The firing order is-1-3-7-2-6-5-4-8, on computer type in search box, muscularmustangs.com/2005/firingorder hope this helps! its a wiring diagram of the 4.6, click on first link when page comes up.
Posted on Sep 10, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello kahumada1: My name is Roger and I will be glad to help you. The fire order is 1-3-4-2. The coils should be marked. Hear is a picture that should help. Please rate the quality of your answer as this is how we know your answer was correct. Thank You for using FixYa.Roger
Posted on May 16, 2009
1.6L Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise.
I hope help you with this, remember rated this post. Good luck.
Posted on Aug 25, 2009
Testimonial: "Thanks, runs like a charm, now!"
For the 1997 Mercury Mountaineer V8 5.0L Engine:
Ignition Coil Connections:
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on May 01, 2010
The engine is a 200 CID straight six, the firing order is 153624...
Just pop the distributor cap and have someone crank the engine while you watch the rotor.
How I can determine which hole in the distributor is assigned to the #1 plug wire.
Pull the number one plug. Turn the engine over slowly (with a wrench) while holding your finger over the plug hole. When the air builds (a lot of) pressure you are coming up to the number one spot on the distributor. (the rotor will point to the location of the #1 hole in the distributor.)
Quick methods to disable the engine I have seen people do on the classics:
Close the points by loosening the set screw
Pull the rotor cap
Connect a wire from the coil to ground. (effectively closes the points. Can damage the coil if key is left on.)
Pull the main ignition wire
And there are some tricks at the starter solonoid involving the ballast resistor bypass that is used to provide a hotter spark while cranking. (Two little wires at the starter solonoid - one is crank the other is the ballast bypass.)
Might give those a look-see. Best of luck (rememeber rated this help).
Posted on May 17, 2010
Testimonial: "This has been very helpful!! Thank you!"
Tips for a great answer:
Mar 24, 2018 | Ford Mustang Cars & Trucks
Oct 19, 2014 | 1991 Ford Mustang
Sep 08, 2014 | Ford Mustang Cars & Trucks
Mar 10, 2011 | Ford Mustang Cars & Trucks
May 20, 2010 | Cars & Trucks
Jun 15, 2009 | 1997 Chevrolet Lumina
Feb 09, 2009 | 1995 Ford Mustang
1,435 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: