Question about 2006 GMC Sierra
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a glow plug relay mounted to the rear of the engine try jumping across it to run the glow plugs and see if it will start then (these relays fail quite often)
Posted on Apr 14, 2009
As long as there is not damaged areas, and all connections are the same. Should work.
Posted on Jun 23, 2009
well there are a few options, depending on the wear of your transfercase you can just replace the rear housing and install new pump clips from gm, jb weld and other bonding agents will not fix the problem but rather prolong it, I just pick up a reman this week for my own truck that was only$1100 great deal compared to junkyards
Posted on Sep 26, 2009
The diagram is simple each glow plug is connected in a series circuit like this -0-0-0-0-0-0-0 that's a in-line 6 for a V-8 it would look like this
and the plugs would be hooked up on the back then if you follow the wire to the glow plug relay you will find that the relay has four wires one to battery one to the glow plugs one to the ignition switch and one to ground in the box. If you want you can purchase a manual for 5.99 on-line. and it covers the three fuse-able links for this system and the new Glow plugs available for this truck here is the web page. http://www.wiring-diagram.com/?gclid=CMuAvJ3Ql58CFQZfagod0jpAxQ
Posted on Jan 09, 2010
Tips for a great answer:
Jan 30, 2017 | GMC Cars & Trucks
Aug 23, 2015 | GMC Cars & Trucks
May 21, 2012 | 2007 GMC Sierra 3500HD
Jan 08, 2011 | Chevrolet Silverado 2500HD Cars & Trucks
Dec 11, 2010 | 2003 GMC Sierra 1500
Jan 09, 2010 | 2003 GMC Sierra 2500HD
Sep 20, 2009 | 2007 GMC Sierra Classic 1500HD
2,115 people viewed this question
Usually answered in minutes!