Question about 1996 Oldsmobile Aurora

1 Answer

I broke off the rod were the water pump pully is. in my olds aurora 1996 and i dont knw what to do ????? help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,036 Answers

IF YOU HAVE THE 4.0 ENGINE ROD BROKE PART OF WATER PUMP.YOU HAVE TO REPLACE WATER PUMP.YOU NEED TOOL J - 38816 TO REPLACE INSTALL AND REMOVE WATER PUMP.YOU CAN BUY TOOL AT ANY AUTO PARTS STORE.TORQUE FORWATER PUMP IS 73 FT LBS. TORQUE FOR WATER PUMP DRIVE BELT COVER IS 89 INCH POUNDS.

Posted on Sep 14, 2010

  • challo09 Sep 14, 2010

    i only broke the rod were the pully holds on to not the pump. i belive is the cam shaft some like that do i still need to replace the pump????

  • Jonah Oneal Sep 15, 2010

    ROD YOU BROKE OFF IS PART OF WATER.IF YOU ARE LOOKING AT A ROUND THING WITH NOTCHES ALL AROUND THATS THE WATER PUMP.IF YOU DAMAGED SHAFT WHERE PULLEY GOES ON IT HAS TO BE REPLACED.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove water pump pulley 1998 Oldsmobile aurora that runs water pump


if no bolts then the new pump will have the pully on it meaning it is press fit.

Mar 05, 2015 | 1998 Oldsmobile Aurora

1 Answer

How do you change the a/c compressor on a 96 old aurora?


just changing the compressor, some auto parts stores have videos on this. you will need a vacuum pump and some parts. there is not partial fix on AC. the refrigerant gas is corrosive when it is in contact with water. so, the old lines must be cleaned the dryer must be replaced, the "O" rings must be replaced. the orifice must be replaced. after all the parts are replaced a vacuum pump is put on the system for at least 4 hours. after that, the pump is turned off and the valves are closed and the gage is watched until you are sure there is no leak, then the charge in placed in the system. I forgot, you must also ad the correct "pag oil" if you still what to know how to do this let me know and I will try to find you a link, or you can try Auto Zone

Jul 27, 2014 | 1996 Oldsmobile Aurora

1 Answer

How to change water pump on 2001 olds aurora 3.5


does anyone have experience changing a water pump on a 2001 ...

https://answers.yahoo.com/question/index?qid...
Aug 13, 2008 - aurora.................good luck. if u got the "short star" (3.5 dohc v6) good luck. if u got the 4.0........even better luck. happy trails. TonWon · 8 years ...

Aurora 4.0 Exhaust Leak and Water Pump Whine - YouTube

? 0:46
https://www.youtube.com/watch?v=5mjg_Ps1Ctg
Dec 13, 2012 - Uploaded by Brendan Doyle
Aurora 4.0 Exhaust Leak and Water Pump Whine. Brendan Doyle ... How to Install a Waterpump on a Cadillac Northstar engine. ...How to access spark plugs on a 2001 Oldsmobile Aurora 3.5L Engine - Duration: 3:19. Dennis ...

Oldsmobile Workshop Manuals > Aurora V6-214 3.5L VIN H ...

workshop-manuals.com/oldsmobile/aurora/...3.5l.../water_pump/.../page...
Oldsmobile Workshop Manuals > Engine, Cooling and Exhaust > Cooling System ...Aurora V6-214 3.5L VIN H SFI (2001) ... Install the new water pump gasket.

How to change water pump on 2001 olds aurora 3.5 - Fixya

www.fixya.com/.../t16902718-change_water_pump_2001_olds_aurora_...
Mar 4, 2013 - 4.0? It's not that hard to replace but you need a special socket to changeit ... The starter motor sits in the "valley" between the two bank of cylinders ...

Mar 04, 2013 | 2001 Oldsmobile Aurora

1 Answer

Water pump is nocking, is it the pump or tension pully


When you get done doing the water pump,
you most likely would charge someone more
than $625.00 to do another one

Jan 11, 2013 | 1994 Buick Park Avenue

2 Answers

The pully for the water pump that is attatched to the crank shaft is broke and i dont know how to take it off


The crankshaft pulley will have one big bolt in the center and it takes a lot of torque to loosen it. Once the bolt is out ( after all the belts are removed) you may need a tool called a harmonic balancer puller. It will have slots in it that you put bolts through and bolt it to the pulley, then there is one large bolt in the center that presses against the crankshaft and forces the pulley off.

Aug 22, 2011 | 1997 Oldsmobile Aurora

1 Answer

Replace water pump 1995 oldsmobile aurora


I did a 2001 and it wasn't too bad. You need a special tool to remove the pump from the water jacket. I just rented it from Autozone for free.
Don't let is go too long. I let mine go until the bearing froze up. Then it damaged the belt and pully running off the cam. Cost me another 200.00 in parts.

Oct 11, 2010 | 1995 Oldsmobile Aurora

3 Answers

Where is the water pump located on a 1996 olds aurua the car is over heating


Hi, i would check the thermostat first unless the water pump is leaking as the water pump is where the timing belt is is the timing belt needs removing to get to the pump, take the thermostat out and place it in a tub of boiling water and check if it opens up if it dont then it will need replacing.

you need to bare in mind that it could also be head gasket failure so make sure you get this tested if the thermostat is found to be in working order.

let me know if you need further assistance ok

Sep 14, 2010 | 1996 Oldsmobile Aurora

1 Answer

The belt stop turning I think its the idler pulley because it is crooked and cracked.


also check water pump,or well check all pullies to see which one is locked up

Jul 06, 2009 | 1996 Oldsmobile Aurora

3 Answers

1996 Chevrolet Cavalier, 2.2 Water Pump.Can't remove pully.


great problem this ,either put a big screwdriver through a hole and jam it up ,if no hole or offrice then use a big pair of super snap on water pump pliers

Apr 05, 2009 | 1996 Chevrolet Cavalier

2 Answers

Replacing a power steering pump on a 1996 Olds Delta 88 Royale


3 bolts should be holes in the pully too go thru with an extension if their are no holes in the pully then you nee a power steering pump pully remover it can be rented for 5.00 at auto zone

Feb 23, 2009 | 1996 Oldsmobile Eighty Eight

Not finding what you are looking for?
1996 Oldsmobile Aurora Logo

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...