Question about 2005 Suzuki Forenza

2 Answers

High beam lights wont come on steady. They come on when using the flash side but not the other way replaced switch but didn't solve problem

Posted by on

  • 3 more comments 
  • steve94097 Sep 09, 2010

    the multi function switch (headlight,turn signal, and dimmer ) all in one switch

  • steve94097 Sep 09, 2010

    all one unit heatlight switch on end of arm signals and dimmer in base

  • steve94097 Sep 09, 2010

    checked fuses in fact high beams work when you pull handle to flash other drivers to tell them their hi beams are on

  • steve94097 Sep 09, 2010

    all fuses good bulbs good can't figure out why lights would work to flash but not steady if dimmer switch is good

  • steve94097 Sep 10, 2010

    first expert was an idiot asked dumb questions, like what switch did i replace. hotchevy1965 answer made sense

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 14,036 Answers

IF YOU REPLACED SWITCH.PROBLEM IN LIGHT SWITCH WIRES HAS A BROKE OR LOOSE WIRE.

Posted on Sep 10, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Suzuki Master
  • 75,822 Answers

What switch exactly did u replace?

Posted on Sep 09, 2010

  • yadayada
    yadayada Sep 09, 2010

    is there a separate switch for the lights?

  • yadayada
    yadayada Sep 09, 2010

    have you checked all the fuses, under hood as well.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My low beams work but my high beams wont come on. please help. I live in the country and there are alot of deer and other animaks always crossing the road.TIA


you really need to mention the vehicle make and model , but here goes --if it is a ford product check the light control module as this is where most light problems originate
other makes have the same light control module so check it as well
other than that it could be the light switch
put the lights on low beam and pull the switch handle back to flash the high beams
if they flash the high beam relay is ok --if not it may be the relay
if nothing happens it is most like ly the switch

Oct 26, 2015 | Cars & Trucks

3 Answers

New Beetle 2002 Hi-Beam lights only flash, don't stay on, what can I do?


I would test the relay to make sure it is still good and everything there is working like it is supposed to. I would also look at the switch and make sure noting came unplugged and it is still in good working order sometimes new parts are still bad.

Jul 26, 2015 | 2002 Volkswagen New Beetle

1 Answer

Why are Dashboard lights not working on high beam?


check the dimmer switch, I had the same problem. this dimmer switch didn`t dim on low beem but went out on high beams, turned the dimmer switch up and down/on and off and it came back on.

Apr 24, 2014 | 2008 Toyota RAV4

1 Answer

Low Beam Wont Turn on, High Beam Yes


I remember a similar problem, replaced the dimmer switch , problem solved, maybe its the same for you, autozone has a website, when you clickon this part, it tells you why it needs replaced, pretty cool , give it a shot, see what happens. tell the parts store you bought the light from what happened, they can help you, customer service is there job !

Jan 13, 2013 | 2006 Mitsubishi Lancer ES

1 Answer

My daytime running lights work, high beams will come on but switch wont stay on, have to hold it. Low beams do not work and daytime running light dash indicator stays on all the time. Is it a relay or...


if you have to hold the switch so the high beams stay on then that indicates a bad/worn switch,you could have 2 problems the day time running light relay may have a problem with it.i would first replace the headlight switch at the base of the steering colume as by the info you supply its not changing to the high beam side without holding the switch in position.

May 25, 2011 | 1998 Pontiac Sunfire

2 Answers

HIGH BEAM LIGHT STAYS ON IN DASH ...SWITCH GOES HIGH AND LOW BUT ONLY WORKS ON HIGH (ONE LIGHT) AND NO LIGHTS ON LOW


I have the same problem and I've tried two fixes so far and neither has worked.
- I replaced the daytime running light module and that didn't work
- I replaced the trun signal/hazard/light switch and that didn's work

I've had one comment that it could be a ground issue.
hope this saves you spending money on "fixes" that don't solve the problem

Dec 03, 2010 | 1996 Pontiac Sunfire

1 Answer

Why wont the headlights won't go on


It can have a bad headlight switch, but most often it is a bad high beam switch on the floor.

Turn on the headlights and press the high-beam switch off and on a few times, if the headlights flash, flicker, or start working again then replace the high-beam/dimmer switch.

Apr 19, 2010 | 1982 Ford Ltd

1 Answer

Its reversial for me my high beams wont work what


Good day:
the following is what you can do to test to see whats going on
turn on the headlights,put in high position
2.leave light in high, disconnect the head light dimmer switch, connect a fused jumper between head light relay supply voltage circuit of the dimmer switch and the control circuit of the head light relay. if the high beams come on then replace the dimmer switch, if the high beams don,t come on then.
3.use a fused jumper across the battery positive voltage supply circuit and the switched high beam voltage supply circuit. if the high beam come on now replace the head light relay, if the high beams don't come on then you will have to replace the LH I/P fuse block. I would most likely say that it's the relay just because of the year. I gave you a lot here I hope this helps

Cheers

Jul 08, 2009 | 2002 Chevrolet Monte Carlo

2 Answers

Both of my low beam head lights on a 1995 honda accord wont turn on so i have to drive with the high beam lights i have already cheked the fueses and they are all good


replace the high beam/dimmer switch, the contacts are defective for the low beam circuit which runs through the switch, this is the mulitifunction/turn switch on the steering column.
cbf7910.jpg.

Apr 09, 2009 | 1994 Honda Accord

Not finding what you are looking for?
2005 Suzuki Forenza Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...