Question about Dodge Pickup

Open Question

I have a 1975 Winnebago 440 dodge power.I am looking for a diagram of how the drive line park brake is put together

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 4669 Answers

SOURCE: Fix chevy 2000 S10 parking brake.

Some times the rotors are hard to remove.(rust) Just soak it with wd40 and use a big hammer or prybar. Try smacking it around the studs, But don't hit them. If you smack the part of the rotor that the regular service brake rides on you will warp the rotor. Just keep trying, you'll get it. Also if you mess up the rotor they really aren't that expensive to replace. Plus your old one is likely wore out anyways.

Posted on Apr 05, 2009

  • 1124 Answers

SOURCE: brake diagram for 1995 dodge caravan

Could be air in the line..
Could be the caliper..
Could be the break line - the flexable line that runs from the metal line to the caliper..

If you get a Chilton Book for that car - it has how to diagams for breaks, electric - etc.
A good investment..

Rate well ;o)

Posted on Jul 22, 2009

michigan man
  • 3533 Answers

SOURCE: Need a vacuum line diagram for a 1975 Monte Carlo

give these websites a try and you can also stop by your local GM-dealership in the parts department and see if they can print you off the pictures & diagram you need if you are looking for another one give these guys a call they only sells GM-parts its Schram auto & truck parts 1-800-292-1032 and they website is and i alway look around for a good salvage yard near me give this website a try to find one close to you its wish you the best of luck Michigan Man.

Posted on Mar 27, 2010

  • 4369 Answers

SOURCE: im looking for a brake line diagram of all the

Disconnect the hydraulic brake lines.

  1. Disconnect the inlet hydraulic brake lines.
  1. Disconnect the outlet hydraulic brake lines.


Posted on Aug 19, 2010

  • 314 Answers

SOURCE: need diagram for instructions to

Let me know if this helps you any. Goodluck.

Posted on Jul 05, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to change parking brakes on 2003 dodge ram

  • 1 Determine which type of emergency brakes your Dodge Ram will need. Emergency brakes typically function by activating the regular braking system on the driving wheels. The emergency brakes for the Dodge Ram have used rear disc brakes since 2001.
  • 2 Release the parking brake pedal completely and raise your vehicle. Remove the tire and wheel with a socket wrench and disconnect the brake caliper from the caliper adapter. Slide the rotor from the axle shaft.
  • 3 Install the new brake rotor onto the axle shaft and complete the installation by reversing the removal steps.
  • 4 Tighten the wheel mounting nuts in the proper sequence with a torque wrench until the nuts are torqued to 47.5 foot/pounds Repeat the tightening sequence to torque the nuts to 95 foot/pounds.
  • 5 Apply and release the park brake pedal to seat and adjust the parking brake cables. Road test the vehicle to ensure the vehicle's brake system is functioning.
  • 6 Place tool C-3919 or the equivalent over the park brake shoes and use the star wheel adjuster to lower the park brake shoes until the lining just touches the jaws on the tool.

  • Read more :

    Dec 31, 2014 | Dodge Cars & Trucks

    1 Answer

    I have a 1975 Dodge powered class A Command or motorhome with a 440 HD motor. When I 1st got it after putting in fresh gas ( it had been setting over 3 years) it ran fine little smoke from both pipes...

    No compression means engine needs new piston rings and/or new valves. Find a trusted mechanic to give a estimate on cost as it's not a do it yourself project unless you know what you're doing.

    Oct 20, 2013 | Cars & Trucks

    1 Answer

    I have a 1975 winnebago from dodge Someone messed with the spark plug wires I need the fireing order and how the wires go on the cap Dodge winnebago 1975 v8

    You could have 3 different engines in that rig.
    The firing order is 1-8-4-3-6-5-7-2 for most Dodge 8 cyl engines.
    And the odd cylinders are on the driver side.
    The small block engines ( 318 ) have the distributor in the back, and the big block engines ( 360 440 ) are in the front.
    The rotor on the big blocks turn counterclockwise. The dist cap is usaully stamped with cyl 1 as a starting point.

    Jul 22, 2013 | Cars & Trucks

    1 Answer

    96 dodge intrepid brake lamps do not turn off. already replaced brake lamp switch. lights stay on even after removing fuse. please help

    Hmmm... sounds like a power( live line ) melted the insulation and fused together w/ the brake line, thus it powers up your brake light.

    Check your rear brake wire harness leading to the front connection main harness., if the harness are covered w/ plastic insulation, cut the insulation and look for a wire that melted and fused together.
    If you found the wire, seperate it and put some insulator tape to prevent power line shorting.
    The power line usually colored RED.
    Hope that helps!

    Nov 06, 2011 | 1996 Dodge Intrepid

    1 Answer

    I have a 2001 winnebago on a workhorse chasis. with 4L80-e transmission that dont lock when put into park

    There is a fuse for the auto park that you need to check and also make sure that the reservoir under the winnebago isn"t leaking. There is a green switch under the motor home on the hydraulic unit for the brake that goes bad quit often.

    Sep 23, 2010 | Chevrolet 3500 Cars & Trucks

    4 Answers

    No Brake Lights, unable to switch from park to drive

    It is not the multifunction switch. The power feed goes thru the brake switch before the multi function. You have no power the the brake switch because your shift interlock is not allowing you to shift it. I'll look up the wiring diagram and repost with a solution.

    Apr 25, 2009 | Ford Expedition Cars & Trucks

    1 Answer

    Underdash wiring ripped out by dog chasing a mouse

    use the wire to strangle the dog and get a pro to rewire the dash it is not a diy job

    Apr 03, 2009 | 1996 Chevrolet C/K 3500

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    62 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts


    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8518 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides