Question about 1999 Buick Regal

1 Answer

Is their a recall on 1999 buick regals...if so why,,because my key always get stuck in the ignition and now I always have to jump start my car...

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

Could be a couple of things. First open up the underside panel on the passenger side, pull out the BCM box and check for corrosion on the pins. Sometime the AC leaks water out here or if the windshield leaks(Condensation or otherwise) it will rust the pins. Remove all corrosion, and it should work fine. After that fix your leak. Clean the trap in the condenser leak hose to ensure the water escapes from now on. If there is no problem there, you will need to replace the lock cylinder.

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 buick regal won't start


This may be related to the antitheft system The system is known for turning off the starter and/or injectors when it fails. Is there a light on the dash that says SECURITY or a picture of a car with a lock through it? This is a common problem worth looking into. http://www.diy-gm-security.com/
26205359-pfr3olq4vbrbhfmp0xdrulln-4-2.jpg

May 26, 2016 | 1999 Buick Regal

1 Answer

Why wont my 99 Buick regal ls stay running it starts then immediately stalls out


Is your SECURITY light flashing? If so, you have a V.A.T.S. problem. VATS stands for Vehicle Anti Theft System. Try getting a new ignition key made because the resistance value has probably changed in the one you have. If that doesn't do it you'll need to get a VATS bypass.

Sep 13, 2014 | 1999 Buick Regal

1 Answer

2000 Buick regal- My key is stuck in the ignition and will not come out and it has no power, I am unable to even move it oiut of the garage. Help!


I suspect your battery is dead. The key won't come out unless the car is in park also.. and might even require power from the battery to get the key out.. I would start with a jump to the battery and see if your key issue is solved.

May 12, 2011 | Buick Regal Cars & Trucks

2 Answers

Will not crank and can't remove the key from the


You need a new ignition key cylinder to fix this car
When the key is stuck the tumblers have jambed up inside causing this problem to come to you

May 14, 2010 | 1999 Buick Regal

1 Answer

After putting key in the ignition of my 2003 buick regal, it seems that all power was zapped from the car. The key is still stuck in the ignition.. starter? alternator? battery? brain? I don't know where...


most likely your battery or, cables: when all your power went it probably was because your battery cables are loose or corroded this is also why in some cars the key is retained also check to see if your car is in "park" first

Apr 21, 2009 | 2003 Buick Regal

2 Answers

1999 Buick regal Security light on. Won't start.


I had the same problem with my 95 Lesabre. The owners manual says to take the key out, and wait 3 minutes(until the light goes off). It should fire right up.

Feb 19, 2009 | 1995 Buick LeSabre

1 Answer

99 buick regal will not start gears will not shift


possibly ignition switch issue, remove the lock cylinder and manually jump the wires, if that works, replace the switch

Oct 25, 2008 | 1999 Buick Regal

Not finding what you are looking for?
1999 Buick Regal Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...