Question about Ford F-250

1 Answer

I have a 1994 ford with a 7.3 deisel it appears to be leaking engine oil on the driver side of the engine around the exhaust manifold or below what should i be looking for

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 107 Answers

It could be many things. do what a mechanic would do get a flashlight and trace the oil trail to its highest point. That will be the source. If car is heavy with oil then first clean engine withy "Gunk" engine spray at a local do it yourself car wash. This will make it easier to trace

Posted on Sep 09, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where does the upstream passenger side 02 sensor bolt in on the exhaust i found the sensor hanging from the electrical connector busted out the engine its a 1994 ford thunderbird

It should be screwed directly into the exhaust manifold. If you found it hanging, and you do not have a major exhaust leak, then I would say that your O2 sensor is broken. Look for a bung on the manifold and you will have to extract what is left of your old one.

Jun 11, 2015 | 1994 Ford Thunderbird

1 Answer

2003 Durango with 5.9 serious oil leak just started below the exhaust manifold on the right side. It did not leak before and haven't had any work done such as oil change to cause problem. Upper control arm...

the oil,sender unit is suspect as it is under the manifold and they can fail at the seal between the hard housing and the thread body or around the tin sides where they join
check the oil level, clean around the area , start the engine and watch for oil spurts or drips

Nov 13, 2017 | 2001 Dodge Durango

1 Answer

1994 ford thunder bird oil pressure switch location

The 4.6 engine is on the driver's side of the block under the exhaust manifold.

Sep 02, 2012 | Ford Thunderbird Cars & Trucks

1 Answer

1994 ford f150 oxygen sensor location

An Oxygen Sensor (O 2 S) or heated Oxygen Sensor (HO 2 S) is used on all engines. The sensor is mounted in the right side exhaust manifold on some V8 engines, while other V8 engines use a sensor in both right and left manifolds.

Heated oxygen sensors are located in the exhaust pipes below the exhaust manifolds. The sensors react with the oxygen in the exhaust gasses and generates a voltage based on this reaction. A low voltage indicates too much oxygen or a lean condition. Where as a high voltage indicates not enough oxygen or a rich condition.

Disconnect the Oxygen Sensor (O 2 S). Measure resistance between PWR and GND (heater) terminals of the sensor. If the reading is about 6 ohms at 68°F (20°C). the sensor's heater element is okay.

Hope this helps (remember to rating this free answer).

Oct 13, 2011 | 1994 Ford F150 Styleside Supercab

1 Answer

I cant locate the oil sending unit and I was wanting to know if you could tell me where it is. Its a 1990 Ford Ranger 2.9L V-6 Automatic.

Under hood, driver side, lower enginearea, beneath exhaust manifold, left side of oillevel sender, above oil pan rail, mounted in block .... if it is not there it is on the back of the engine on the passenger side below the intake manifold on the block...

May 23, 2011 | 1990 Ford Ranger SuperCab

1 Answer

2000 mustang v6 has p0174 code. no leaks from hoses or anything external (vacuum) exhaust has no leaks. car runs bad uphill $ shudders from stopping at stop sign and accellarating. p0174 indicates bank 2...

Hi, have you checked for intake manifold gasket leaks? Pretty common on Ford V-6. With engine running, spray carb cleaner on the gaskets. If the engine speed changes, you have a gasket leak (yes, driver's side of the manifold).
Thanks for using FixYa.

Jan 23, 2011 | Ford Mustang Cars & Trucks

1 Answer

Oil pan leak on 1994 bronco with a 5.0 liter

Oil Pan Removal
  1. Remove the bolts attaching the fan shroud (8146) to the radiator (8005) and position the fan shroud over the fan assembly.
  2. Raise vehicle.
  3. Remove exhaust manifold-to-exhaust pipe.
  4. Disconnect the oil cooler line at the left side of the radiator if equipped with an automatic transmission (7003).
  5. Remove the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
  6. Drain the crankcase.
  7. Loosen transmission mounting nuts.
  8. Raise the engine (6007) and place wood blocks securely under the engine supports.
  9. Remove the oil pan attaching bolts and lower the oil pan (6675) onto the crossmember.
  10. Remove the oil pan from the vehicle.

Apr 07, 2010 | 1994 Ford Bronco

2 Answers

Can't find the oil filter on a 2002 Ford Explorer, 4.6L V8.

It is Located On the FRONT Driver Side of ENGINE Close to LOWER RADIATOR HOSE

Aug 18, 2009 | Ford Explorer Cars & Trucks

1 Answer

I h8 leaking fluids

that tells me that its definitely a head gasket leak, behind the exhaust manifold there is a row of bolts that runs from front to back about half an inch below the bolts is where the seam between the head and the engine block is see if you can clean this area off and look for fresh antifreeze. does the oil look like coffee with cream in it?

Dec 31, 2008 | 1994 Chevrolet Caprice Classic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5653 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides