Question about Jeep Wrangler

1 Answer

I changed the tires on my jeep wrangler and did not use the TPMS Sensors. Now the light sstays on all the time. How can I turn off the light. I don't want to use the Sensors.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 42 Answers

Cannot -- you will have to take the instrument panel apart and remove the bulb in the light. easier way would be to place a peice of black electrical tape over the lamp

Posted on Sep 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep patriot 2016 low tire pressure light is on. My jeep does NOT have any tire pressure sensors. how do I reset the light ?


answered like 10,000 times here and over a million using google.
search much, ?
read the operators guide ever?
answer is , YOU CANT. (99.9% true)
nor can jeep (bound by laws)
your statement is not true it came with TPMS new
in the USA its the LAw.
So you are incorrect guessing, sorry , need link to fed law, have it.

drive to any tires store, in the USA? no country stated, so.... ?????
drive in , and tell them to put the sensors back (all 5)
if the cars wheel rims are non stock, oops, PIT FALL 2.
there is a tool you can buy,(i have one) that allows you to
turn it off.
Ill not teach that, (I take the 5th on that , like the hildabeast does )
I called the tool maker and they cant do 2016, yet.

sorry, ,next time dont buy car with warning lamps stuck on.
or cars hacked? yes, it's a new world now, Fed nanny lights.etc
GOOGLE TPMS , and read.
no lack of information here, or 12 long years now.

Nov 16, 2016 | Jeep Cars & Trucks

2 Answers

Why is tire pressure fault light blinking?


Could be low air,two pound less may light blinking.

Dec 14, 2015 | Cars & Trucks

1 Answer

Tire Pressure Warning is on and yet the tires are full of air


Hello,
Maybe we can help.

Set your tire pressure to the recommended factory air pressures. (to find this look at the placard that is located in your driver side door jam.) After setting all 4 tires to the correct pressure drive normally. If the TPMS (Tire Pressure Monitoring System) light doesn't turn off within 24 hours have the TPMS sensors checked at a local wheel and tire retailer or at the dealer. TPMS sensors have batteries in them that last an average of 5-7 years. If one of the batteries is dead it will trigger the system.

FYI, all of our stores can quickly troubleshoot your TPMS system and we stock most replacement TPMS sensors if you end up needing a new one. To find a local Discount Tire near you please visit www.discounttire.com/.

Nov 26, 2013 | 2008 Mercury Mariner

1 Answer

I have problem with my TPMS (KIA RONDO)2007 SENSORS


If you look in your manual, there is usually a procedure for resetting TPMS sensors. They can be as silly as turning off and on the headlights 3 times or honking the horn with the key turned to the on position. If you can't find it in there the dealer will have a tool to reset it for you.

Feb 23, 2012 | 2007 Kia Rondo LX V6

1 Answer

Service tire monitor on what is the problem? how do you reset the system?


TIRE PRESSURE MONITOR SYSTEM
The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. If your vehicle has this feature, sensors are mounted on each tire and wheel assembly, except the spare tire. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle.

The TPMS is designed to alert the driver, if a low tire pressure condition exists. This system also allows the driver to check tire pressure levels using the Driver Information Center (DIC).

When a low tire pressure condition is detected, the TPMS displays the "CHECK TIRE PRESSURE" warning message on the DIC, and at the same time illuminates the low tire pressure warning symbol.

You may notice, during cooler weather conditions, that the tire pressure monitor light, located on the instrument panel cluster, and the "CHECK TIRE PRESSURE" message will appear when the vehicle is first started and then turn off as you start to drive the vehicle. This could be an early indicator that the tire pressures are getting low and need to be inflated to the proper pressure.

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

The "CHECK TIRE PRESSURE" warning message and low tire pressure light (telltale) will appear at each ignition cycle until the tires are inflated to the correct inflation pressure.

The Tire and Loading Information label (tire information placard) shows the size of your vehicle's original tires and the correct inflation pressure for your vehicle's tires when they are cold.

Your vehicle's TPMS can alert you about a low tire pressure condition but it does not replace normal tire maintenance.

NOTICE: Do not use a tire sealant if your vehicle has Tire Pressure Monitors. The liquid sealant can damage the tire pressure monitor sensors.

RESETTING THE TPMS IDENTIFICATION CODES
Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. Each tire/wheel position is matched to a sensor, by increasing or decreasing the tire's air pressure. The sensors are matched to the tire/wheel positions in the following order: LF TIRE (left front tire on the driver's side of the vehicle), RF TIRE (right front tire on the passengers side of the vehicle), RR TIRE (right rear tire on the passengers side of the vehicle), and LR TIRE (left rear tire on the driver's side of the vehicle).

You will have one minute to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer than one minute, to match the first tire and wheel, or more than five minutes to match all four tire and wheel positions the matching process stops and you will need to start over.

The TPMS sensor matching process is outlined below:
  1. Set the parking brake.
  2. Turn the ignition switch to "RUN" with the engine off.
  3. Turn the headlamp switch from "OFF" to the parking lamps setting four times within three seconds. A double horn chirp will sound and the TPMS low tire warning light will begin to flash. The double horn chirp and flashing TPMS warning light indicate that the TPMS matching process has started. The TPMS warning light should continue flashing throughout the matching procedure. The "SERVICE TIRE MONITOR" message will be displayed on the Driver Information Center (DIC).
  4. Start with the driver's side front tire.
  5. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire's air pressure for 10 seconds, then stop and listen for a single horn chirp. The single horn chirp should sound within 15 seconds, confirming that the sensor identification code has been matched to this tire and wheel position. If you do not hear the confirming single horn chirp, you will need to start over with Step 1. To let air-pressure out of a tire you can use the pointed end of the valve cap, a pencil-style air pressure gage or a key.
  6. Proceed to the passenger's side front tire, and repeat the procedure in Step 5.
  7. Proceed to the passenger's side rear tire, and repeat the procedure in Step 5.
  8. Proceed to the driver's side rear tire, and repeat the procedure in Step 5.
  9. After hearing the confirming horn chirp for the left rear tire, check to see if the TPMS warning light is still flashing. If it is, turn the ignition switch to LOCK to exit the sensor matching process. If the TPMS warning light is not flashing, the five minute time limit has passed and you will need to start the process over beginning with Step 1.
  10. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label.
  11. Put the valve caps back on the valve stems. The spare tire does not have a TPMS sensor. If you replace one of the road tires with the spare, the "CHECK TIRE PRESSURE" message will be displayed on the DIC screen. This message should go off once you re-install the road tire containing the TPMS sensor. The "SERVICE TIRE MONITOR" message is displayed when the TPMS is malfunctioning. One or more missing or inoperable TPMS sensors will cause the service tire monitor message to be displayed.

Nov 23, 2010 | 2006 GMC Yukon

1 Answer

At first, the light to let me know about the air in the tires turned on, and after a couple od days I took it to the car dealer where I bought it..The tires were check and was told that the light will turn...


contact the place where the tire was changed and let them know that they damaged the TPMS sensors. If they have a grain of integrity, they'll make it right.

Nov 23, 2009 | 2008 Hyundai Sonata

1 Answer

Any way to pull fuse on tpms. I just put


unfortunely not The system is monitered by the WCM (wireless control module). you would have to install the TPMS on the new wheel. You can just swap them from the other wheels you took off. use a 13mm deep socket remove the sensors and install on the wheel you have on the car. hope this helps.

Jul 09, 2009 | 2008 Jeep Wrangler

1 Answer

TPMS PROBLEMS ON 2009 JK AFTER SWITCHING TO 17" WHEELS


It won't hurt you vehicle at all to not have the sensors. You will not be able to make the TPMS light go off with no sensors.

Jun 28, 2009 | 2008 Jeep Wrangler

1 Answer

AEV procal module TPMS over-ride


You can not adjust this. It is integrated software in the WCM (wireless control module) take it to the dealership they can change that threshold for you. Also have them set the pinion factor for the bigger tires your speedo will be more acurate. hope this helps.

May 08, 2009 | 2008 Jeep Wrangler

1 Answer

09 wrangler x...tires now wrangler 255 75 17 sra.. if i put diff tires on that require more pressure how do i avoid TPMS..thanx


You either have the sensors removed from the tires entirely or may be able to have them calibrated at a local tire service center. However they may or may not be able, or be willing to do this. If the pressure difference is very minimal, I would consider leaving them at the same pressure so you dont have to get yourself in to this situation.

Apr 16, 2009 | 2008 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...