Question about 2000 Mazda 626

Open Question

Transmission modulator valve location? - 2000 Mazda 626

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace transmission modulator valve on a 1991 gmc sierra 1500 4.3


UNLESS you have a TH400 3 speed HD automatic transmission, which I HIGHLY doubt being it's a 1500 with a 4.3, you won't have a vacuum modulator. UNLESS someone swapped an older TH350 or TH400 transmission into the truck.

Instead you'll have what called a TV cable, or throttled valve cable.

This cable should be located on the passenger side of the transmission and is routed up to the side of the throttle body and hooked up like the old "kick down" cables.

The TV cable isn't simply a "kick down" cable, even though it does act like one, it also adjusts the pressure for the transmission to shift at different throttle positions. Much like the old vacuum modulators did.

Hope this helps.

Feb 10, 2015 | GMC Cars & Trucks

1 Answer

Where is the transmission modulator valve on a 1996 ford explorer v6


It is located on the right side of the transmission usually. Just in front of the passenger side floor pan on the side of the transmission case. You will have to run it up on ramps to get to it. As usual take all safety precautions and block the wheels real good. All 4 if possible. Good Luck.

Feb 09, 2015 | 1996 Ford Explorer

1 Answer

Locate vacuum modulator chevy trailblazor 2003


Please verify the year of your truck. A 2003 Chevy Trailblazer has a 4L60E transmission. This transmission does not have a vacuum modulator valve. The 4L60 uses a vacuum modulator valve but the last year for that transmission was 1992. The perpose of the modulating valve is to control/regulate line pressure. The line pressure in a 4L60E is computer controlled or controlled electrically.

Dec 07, 2013 | Cars & Trucks

1 Answer

Location modulator valve


700R4 TRANSMISSION DONT HAVE ONE BUT THE THM350 400 AND 475 TRANSMISSION S MODULATOR VALVE LOCATED REAR BACK BOTTOM CASE ABOVE OIL PAN ON TRANSMISSION CASE.

Apr 23, 2013 | 1994 GMC Sierra

1 Answer

Install modulator valve 1991 ford explorer automatic transmission


they all pretty much look like this, and just one screw holds them down3_15_2013_8_56_53_am.png

Mar 15, 2013 | 1991 Ford Explorer

2 Answers

1989 chevy blazer 1500 transmission modulator vale location


If its a THM400 the valve should be in the side just above the pan. It would have a vac hose going to it.
If its not a 400 it probably does not use a modulator valve but rather a solenoid inside the transmission.

Sep 21, 2012 | 1989 Chevrolet S-10 Blazer

1 Answer

I need to change the transmission modulator valve on a 2003 Chevy Impala. I need help with the location of the valve and even steps on how to change it. Thanks


Hello, the 2003 impala's dont have a transmission modulator valve. this transmission is electronic controlled by the power train control module. the transmission uses a pressure control sol. inside the transmission instead of a vac. operated modulator valve. if you are having a late harsh shifting problem, this would be more in the area of a pressure control sol. at fault

Jun 08, 2011 | Chevrolet Impala Cars & Trucks

1 Answer

The transmission won't shift out of 3rd and will only go up to 50 mph at around 3500 rpm.


check for a bad vacum to the modulator valve on your transmission,or a bad vacum to the modulator valve on the transmission. the modulator valve to the trans. works off of vacum from the engine,look for loose or disconnected vacum lines around the carb. or the air induction system. look for cracked vacum lines that seem to be sucking air when engine running at idle speed. in park. the modulator valve [usually] located on the drivers side,of the transmission,is the main cause of shifting failure. if the valve itself is bad, it will need replacement. thank you for choosing fixya.com!

Mar 08, 2011 | 1996 Chevrolet Blazer

2 Answers

How replace a transmission modulator valve on


It is located on the transmission with a vaccume line going to it. There is a clamp with a bolt that holds it to the transmission. It is an easy fix.

Oct 10, 2009 | 1993 Ford F150 SuperCab

2 Answers

Automatic Transmission


should be on the side of the transmission with a vacuum hose connected to it

Aug 10, 2008 | 1995 Buick Century

Not finding what you are looking for?
2000 Mazda 626 Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...