Question about 1995 Buick LeSabre
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you can bypass the security system entirely like I did. Once and for all. There is a great DIY write-up here http://newrockies.ca - it was the only thing that saved my Park Avenue.
Posted on Jun 03, 2010
A remote starter could be the problem. Have you recently gotten a new ignition key? If you have gotten a new key does it have a chip on it? If so is it the right chip? If no chip on key then that is for sure the problem. As long as that light is on after turning ignition to the on position (not start position) the car will not start when turned to the start position. If this doesn't help you out then submit more information and i'll try to help again.
Posted on Feb 19, 2009
I don't know if this works on a Buick but I have had two cars that the auto adjusters worked when you used the parking brake, I rarely use the parking brake so I got in the habit of working the parking brake 20 times or so at oil change time.
Posted on Apr 15, 2009
30-Minute Learn Procedure 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. 6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password. 7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. Without a scan tool you may have momentary starter interruptions while history clears itself. Good luck and hope this helps, keep me posted, be glad to help.
Posted on Jul 23, 2009
Tips for a great answer:
Aug 24, 2014 | 1998 Buick LeSabre
Apr 19, 2017 | 1998 Buick LeSabre
Feb 03, 2013 | 1998 Buick LeSabre
Jun 08, 2011 | 1994 Buick LeSabre
Dec 14, 2010 | GMC Suburban Cars & Trucks
Jun 16, 2010 | 1999 Buick LeSabre
Oct 16, 2009 | 1999 Buick LeSabre
Feb 26, 2009 | 1999 Buick LeSabre
266 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: