Question about 2003 Dodge Intrepid

2 Answers

HOW DO YOU REPLACE THE BATTREY. 2003 INTREPID

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The battery in an Intrepid is hard to get to. You cannot replace it from the top.

Step 1: Turn steering wheel all of the way to the right.

Step 2: Go to the passenger side front tire.

Step 3: There are 6-8 small bolts holding in a piece of plastic molding. Remove them and take the piece of molding out. (this is located in front of the tire in the wheel well under the car.

Step 4: Open the hood of your car.

Step 5: Remove the two bolts holding your air cleaner to the car.

Step 6: Remove air cleaner and place it out of the way.

Step 7: Loosen the terminal connectors holding the wires to the battery.

Step 8: Remove the battery from the hold in the wheel well.

Step 9: Put everything back together following these steps in reverse.

Posted on Sep 29, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 119 Answers

Follow all the other instructions but save a bother and don't remove the 6-8 bolts. Punch the splashshield from behind the battery towards the wheel and she'll slide up and out.

Posted on Nov 07, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace thermostat on 2003 intrepid 2.7 liter


Find the top radiator hose. Move away from the radiator to the engine block. Where the hose connects to the engine block that is where the thermostat is.

Aug 27, 2014 | 2003 Dodge Intrepid

1 Answer

I have 2003 escalade and the message on my suv is RFA 1 BATTREY LOW


It means you need to replace the battery in the remote you are using.

Feb 16, 2012 | 2003 Cadillac Escalade

1 Answer

My water outlet cap popped off and its leaking water and the water that stays boils. Should i replace my water pump 2003 dodge intrepid se 2.7


replace the cap--is the radiator damaged? No reason to replace the water pump. Boiling is caused by leak, faulty thermostat, clogged radiator, or head gasket.

Aug 22, 2010 | 2003 Dodge Intrepid

1 Answer

How do you replace head light bulbs in a 2003 dodge intrepid


On each headlamp, you need to remove the screws holding the headlamp the the car (2 screws per headlamp)
Then pull the lamp out and change the bulbs.
Dont touch the new bulbs with your hands, use the plastic bag they came in (but remove the bag after install!!!)

Feb 06, 2010 | 2003 Dodge Intrepid

1 Answer

Replace the a/c belt on a 2003 Intrepid not much room under hood


You need to removed the front passenger tire . To get acess to plastic slasth sheild, remove this cover.

Apr 27, 2009 | 2003 Dodge Intrepid

1 Answer

Engine replace 2003 dodge intrepid car wont start replace battery


ok!!! pull on of the tires and the plastic cover is just behind the plastic good loookk

Feb 25, 2009 | 2001 Dodge Intrepid

1 Answer

Help!


key off and out,diconnect negitive side of battrey then postive.clean terimals,charge battrey,connect postive cable (with key off)connect negitive.and start.
your dead battrey is taking up a big load on system,so when you boost it the dead battrey is taking it all the starter is geeting vey little.thats the clicking.
if you dont have a charger dicconect both terminals the same way again,put the jumper cables on the dead battrey.let it charge battrey for 10 15 mins .the longer the better.remover jumpers.
with key off and out conected battrey terminals.connect jumper cables and start.
let me know if it start or not hopefully the key hasnt lost its coding.

Dec 04, 2008 | 2003 Volkswagen Golf

Not finding what you are looking for?
2003 Dodge Intrepid Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...