Question about 2005 Mitsubishi Outlander

1 Answer

The air conditioner compressor is out in my 2005 Mitsubishi Outlander. Now the compressor is trying to turn on and off causing the motor to drag and a very loud noise. Is this a simple repair? Someone said to get another air conditioner belt but smaller. Is this possible?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,140 Answers

Not sure on this car, but have you tried to just disconnect the power connector on the compressor? That should stop the clutch from engaging.

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Because we are at 8000 feet and brought our car from sealevel, can I manually adjust the carburator settings on my Mitsubishi Outlander 2005 2.0L 2WD


I thought that the 2005 Outlander petrol motors were 2.4 EFI motors. If you have a carburetor version, yes you can tune it for 8,000 ft above sea level. Being a 2005 model I would think that it should run well at 8,000 ft for they would be tuned very lean to start with to get past the smog laws. To change the settings you will have to pull the carburetor apart to change the jetting. The only adjustment that you can do on the exterior of the carburetor is the idle air mixture.

May 24, 2015 | 2005 Mitsubishi Outlander

1 Answer

Sump plug on 2005 Mitsubishi outlander turns but doesn't come out.


It would seem like the thread has stripped. You will have to try and pull the plug out whilst turning it. Get a pair of vice grips or similar on the plug across 2 of the flats on the nut and pull on this while turning the plug with an open end spanner. Sometimes this will cause the plug to jump a thread down to a good one and after a few turns you may be able to unscrew it as normal. You will need a new plug. Get one before you try to get the old one out. Hopefully, it hasn't damaged the threads in the sump.

Apr 13, 2015 | 2005 Mitsubishi Outlander

1 Answer

A/C is Not blowing cold air


Even though the Compressor is engaging it doesn't mean the Compressor is working internally. I would have the Compressor tested to determine if it is working properly.

Jun 05, 2010 | 2005 Mitsubishi Outlander

1 Answer

04 mitsubishi outlander ac is not working


What to you mean not working?

a) Air blows but is not cool.
If this is the case, suspect refrigerant leak. Do not operate AC untill it is checked fully. Operating AC with freon leak may lead to compressor failure and expensive replacement.

b) No air blows at all.
If this is the case, suspect blown fuse or burned blower motor. Sometimes is just a fuse or may have a malfunctioning resistor (blower motor works only at full speed).

Jul 13, 2009 | 2004 Mitsubishi Outlander

1 Answer

Mitsubishi outlander 2003 air conditioner- works great then go's hot for a while then I see airconditioner button flashing. Just had it checked for freon and everything check out ok. Seems to happen...


check air conditioner compressor fuse or relay.if all is good.you have a open compressor clutch coil or a bad compressor.also check compressor clutch wire.

Jun 26, 2009 | 2003 Mitsubishi Outlander

1 Answer

2005 Outlander has now new rear brake shoes and


Under the center console is a Y in the cable that leads under and around the top/rear side of the brake handle. At the top/rear of the handle is a locknut and threaded shaft to adjust tension.

Be sure to not have any drag on the brakes when you are done adjusting!

Jun 12, 2009 | 2003 Mitsubishi Outlander

1 Answer

RPM to low (700rpm) mitsubishi outlander 2.4L 2005


Your throttle body likely needs cleaning.

Take the intake hose off and using throttle body cleaner or brake cleaner, spray a rag and use our fingers to clean the gunk off the throttle plate and the contacting area of the inside of the throttle body.

Jun 02, 2009 | 2005 Mitsubishi Outlander

Not finding what you are looking for?
2005 Mitsubishi Outlander Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...