Question about 1994 Ford Tempo

1 Answer

How much does it cost to install a wheel cylinder on a 94 Ford Tempo?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,340 Answers

Well the cost is location relevant, but there is more to be aware of.
First, brakes need to be done in axle sets, both front or both rear...
Usually there is other damage with wheel cylinder issues, like leaking. Brakes are done when soaked with brake fluid..and need to be replaced.
Also, springs need attention, as overheating happens on OTHER brakes with wheel cylinder issues...
Brake drums need to be resurfaced....
So all of these things take between 2 to 4 hours plus all of the needed parts. The wheel cylinders are not very costly, themselves, but the job and labor sometimes is..

Posted on Sep 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I PUT NEW BRAKES. HUBS AND WHEEL CLY. ON MY 94 TEMPO. THE LEFT SIDE BLEEDS BUT THE RIGHT SIDE DONT. WHAT CAN BE WRONG?


Sounds like a leak in the brake line.
In the first place the front disc brakes do 70% of the work to stop the vehicle .
When you need to bleed your brakes you break into the system this lets fluid out air will get in every time so even a pin hole in the line or at a fitting will let air in slowly .The problem is air is compressible fluid is not so look for leaks at rear lines and fittings its vary common for rear lines to rust out and many inexpensive ways to repair them .
An other thing to know is when bleeding brakes is if you didn't open the front lines you don't need to bleed them but with the rears start with the farthest one away from the master cylinder passenger side rear 99% of the time and work back to the master .
I think your whole problem is a rusted out line 94 thats a lot of road salt good luck

Aug 29, 2016 | 1994 Ford Tempo

1 Answer

Is there a cerpintine belt without air for a 94 tempo?


go to a local parts store order a belt for a tempo without air conditioning or bring your old belt and they can cross the numbers over to get you the right lenth belt

Mar 07, 2011 | 1994 Ford Tempo

1 Answer

Brake fluid is not coming out when i open the bleeder at the rear wheel on 89 ford tempo


Good day Robert W73, there should be a metal pipe leading from the master cyclinder to the rear wheels and to the front wheels. Try loosening the pipe on the master cylinder and pump the brakes. It might be that there is an air lock in the master cylinder. By loosening this pipe the air forsing the brake fluid back will be released. As soon as the clean brake fluid comes out of the pipe tighten the pipe again and pump the brakes. Then step on the brake pedal and hold it in, while the brake pedal is depressed open the bleeding nipple and close it again. Repeat this procedure till you have clean brake fluid comming out of the bleeding nipple. Just remember to bleed all the wheels starting at the wheel furthest from the master cylinder and working your way to the closest wheel.

I hope this helps. If it does not help you might need to replace the seals on the inside of the master cylinder or you will have to replace the master cylinder itself as there might be pit marks on the inside causing the hydraulic fluid to bypass the seals.

Nov 30, 2010 | 1989 Ford Tempo

1 Answer

Wiring for the starter on a 94 ford tempo


There is just one wire bolted to the starter with usually a 10mm bolt.

May 09, 2010 | 1994 Ford Tempo

2 Answers

What is the timing specs for a 94 ford tempo?


2.3L ENGINE TIMING IS 10 BTDC 975 RPM MANUAL TRANSMISSION SAME FOR 3.0L MANUAL.FOR THE 2.3L AUTOMATIC TRANSMISSION 10BTDC 875 RPM 3.0L ENGINE AUTOMATIC TRANSMISSION 10 BTDC 625 RPM.

Mar 31, 2010 | 1994 Ford Tempo

1 Answer

My 4 cylinder '94 Ford Tempo has no power at


check if the carbs jets are all clean mabe you must have the carb cleaned out properly

Aug 08, 2009 | 1994 Ford Tempo

1 Answer

89 ford tempo


frist disconnect the negative side of the battery and remove the fuse for the airbags and unplug all the plugs on the steering wheel remove the bolts from the floor and disconnect the steering wheel from the gear box

Dec 16, 2008 | 1990 Ford Tempo

Not finding what you are looking for?
1994 Ford Tempo Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...