Question about 1998 Chevrolet Blazer

1 Answer

I have a trouble code p0336 and my blazer wont start

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,273 Answers

Computer is not getting a good signal from the crankshft position sensor and is not able to time the spark properly. Sensor is usually mounted near the crankshaft pulley. Check the connector at the sensor, the mounting of the sensor, and trace the wire for possible short or damage. If looks OK, consider replacing the sensor itself. Questions, let us know.

Posted on Sep 09, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 184 Answers

SOURCE: code p0336 starts hard tach wont work obd11 07 cobalt

P0336 means Crankshaft Position Sensor A Circuit Range/Performance. Try replacing the crank sensor next.

http://www.check-engine-light.com

Posted on Sep 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Solutions to OBD2 codeS. 2006 Volvo XC90 2.5t codes: P2111 P0336


The CPS is positioned so that these teeth/cogs pass very closely to its magnetic end. As the crankshaft rotates, the raised areas pass by the sensor and complete the electromagnetic circuit. When the indentations (between the teeth) pass the CPS, the circuit is briefly interrupted. Since the camshaft rotates very quickly, the process of repeatedly completing and interrupting the circuit occurs in milliseconds. This progression of completing and interrupting the CPS circuit produces a waveform pattern. This pattern is recognized by the PCM as crankshaft position. The CPS and all of the camshaft position sensors function in much the same manner.
When the engine is running, the PCM constantly compares input signals from the crankshaft and the camshafts. If the crankshaft position is not within a specified degree of variation from the camshaft/s, under a given set of circumstances for a set period of time, a P0336 code will be stored and a malfunction indicator lamp may be illuminated.
Typically, when this code is set, the engine will not start. If the engine does start, it will likely run very poorly. Symptoms of P0336
  • Engine no start condition
  • Hesitation upon acceleration
  • General lack of engine performance
  • Diminished fuel efficiency
Troubleshooting P0336 A diagnostic scanner, a digital volt/ohmmeter (DVOM), a portable oscilloscope, and access to a reliable vehicle information source such as All Data DIY will be needed before attempting to diagnose a code P0336.
Begin with a visual inspection of all system related wiring harnesses and connectors. Wiring circuits, electrical sensors, and/or connectors that have been contaminated with engine oil, coolant, or power steering fluid should be your focus. Petroleum based fluids are known to corrode the protective insulation on wiring and lead to shorted or open circuits and possibly a stored P0336.

Jun 21, 2017 | Volvo Cars & Trucks

1 Answer

My Nissan d40 engine it is running in limp mode the di on-board check showed p0336 fault I replaced the crank angle sender cleaned all the wiring connectors and earth contacts but still the same


P0336 Crankshaft Position Sensor Range/Performance

www.obd-codes.com/p0336
Detailed information on troubleshooting and repairing a P0336 DTC code which has to do ... This diagnostic trouble code (DTC) is a generic powertrain code.

Oct 19, 2015 | Nissan Cars & Trucks

2 Answers

2000 volvo s40 p0335 and p0336 intermittently


both codes are for crank position sensor problems. Change it.

Aug 23, 2014 | 2000 Volvo S40

2 Answers

98 blazer 4.3 engine won't start code p0336, already replaced crank sensor


which crank sensor do you replaced ? the P0336 means P0336 Crankshaft Position Sensor A Circuit Range/Performance.

________________
autel maxidas 708

Feb 25, 2013 | 1998 Chevrolet Blazer

1 Answer

U608 trouble code


Are you sure about this code? Isn't listed in the GM Fault Codes

Please, confirm us.

Oct 24, 2011 | 1999 Chevrolet Blazer

1 Answer

My 1999 gmc yukon wont start code say p0336 just rotates


Hi.

p0336 means CKP sensor performance error. Replace the crankshaft position sensor. If that doesn't fix the issue there is a number of GM factory service bulletins that point at a manufacturing problem with Yukon engine. Find the appropriate service bulletin for your engine in this page.

Regards.

Ginko

Sep 20, 2011 | 1999 GMC Yukon

1 Answer

WHERE IS THE CRANK SENSOR LOCATED ON A 2002 BLAZER, AND WOULD THIS PART BEING BAD NOT ALLOW THE CAR TO START?


Crank sensor is located on the engine front cover, down low. Yes... if this part were bad, this could be one of many reasons the car won't start. The bad part would usually set a diagnostic code (P0335 or P0336).

Dec 30, 2009 | 2002 Chevrolet Blazer

1 Answer

Trouble codes p0201 p0203 p0300 p0336


Start with the replacement of the Crankshaft position sensor to address the P0336.
The faulty crankshaft position sensor may be causing the P0201 which is a fuel injector failure to injector #1 and the P0203 which is a injector failure to the injector #3. The failure to the injector will cause the P0300 DTC code which is a code for multiple misfire.
The crankshaft sensor sends signals to the ECM which then would command the injector to pules open and close and the duration of time. If the ECM does not get the right readings, then it's not going to know when to command the injectors to activate.
Start with the Crankshaft sensor (CKP)and then check the injector wires and injectors it self after the (CKP) has been replaced if problem still persists. Good luck and keep me posted, be glad to help you get your car running 100% again soon.

Oct 27, 2009 | 2001 Chevrolet Impala

1 Answer

Code p0336 starts hard tach wont work obd11 07 cobalt


P0336 means Crankshaft Position Sensor A Circuit Range/Performance. Try replacing the crank sensor next.

http://www.check-engine-light.com

Sep 05, 2009 | Chevrolet Cobalt Cars & Trucks

1 Answer

IDLES ROUGH LOSS OF POWER BETWEEN 45-55 MPH RUNS REALLY ROUGH LIKE STARVING FOR FUEL TROUBLE CODES P0263 P0336 PO401 PB2B P2763


just a guess but might be a fuel pump, try smacking the tank before you start it and see if it idles better after.

Jul 25, 2008 | 2000 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...