Question about 1992 Mercury Capri

1 Answer

When turn head lights on all lights except head lights come on what could be problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 8,206 Answers

Check headlight fuse first, then check headlight relay(s) in box under hood. Relay should click when lights are turned on. If not, replace relay.

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All lights work except the head lights. Turn, Single, ect. Work. With head lights on Park, Day drive lights work. The only thing that does not work is the head lights.


What is the vehicle? Does the dimmer switch click and switch to highbeams, do the highbeams come on when you flash them

Oct 11, 2015 | Cars & Trucks

1 Answer

The headlights on my 2001 Pt. Cruiser don't work. I've changed the fuses. What else could it be?


All the exterior lights run threw the turn signal switch, except the high mount brake light. So it could be the head light switch in the dash or the turn signal switch.

Sep 04, 2015 | Cars & Trucks

1 Answer

Dash lights and running light doesnt work


check switch with a voltmeter

Mar 15, 2012 | Cars & Trucks

1 Answer

I have 89 jeep cherokee the lights turn on except for the tail lights. Then it blows the 30 amp fuse for the gauges. But the lights still work. Except for the tail lights. Do you think is the switch...


sounds more like a short (joined) circuit, probably at the tail lights since they never work. look for melted or damaged wires back there. had any work done back there recently (maybe for towing lights?)

Sep 08, 2010 | 1989 Jeep Cherokee

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

1 Answer

Head lamps not turning on except when brights are on.


check for voltage going to the sockets, if none, go to the dimmer switch

May 20, 2010 | 1983 Ford Econoline

1 Answer

Head lights on my 1997 dodge ram 1500 pickup stay on when i turn off ignition switch. it is not head light switch. pulled out of dash.


under the driver inner fender is where dodge usually put their daytime runnig light moduals find it,unplug it,the lights should be fine.if you don't need it by law everything else will work normally except the high beem light will no longer work.

Aug 29, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Turn head lights on every light works except low beams


thare is a high beam relay and a low beam relay in the fuse box find the low beam relay and replace it. if this dont work its probabley the switch

Dec 31, 2008 | 2003 Ford Taurus

1 Answer

Blinkers work except when.......


Sounds like you have a ground problem on the lights.
I'm assuming that the front lights that don't work are the directionals.
You might want remove one then turn on the headlights and try a temporary ground wire to the black wire. If it works then either check your ground wire from the battery to the chassis or install a separate ground wire the the light assembly.
As far as blinking fast, make sure all your lights are working. If one bulb is out that could be the problem.
Replace the dimmer switch.

Oct 02, 2008 | 1985 Jeep CJ7

Not finding what you are looking for?
1992 Mercury Capri Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...