Question about 1996 Dodge Ram

1 Answer

Side mirrors are very lose and are blown inward by wind How can I tightin them

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The bolt clamp design is crappy,,, Re-tap the threads with a 1/4-20 tap and use 1" 1/4-20 bolts. Also try using a shim such as a piece of cardboard behind the plastice clamp to add tension. I have been dealing with for YEARS. and just decided to re-thread the holes and a bolt. I think I have finally fixed the issue?

Posted on Sep 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wind noise 2011 volvo s60


possibly a partially open window or partially open sunshine roof.

Mar 12, 2015 | 2011 Volvo S60

1 Answer

Why are the mirrors not working on a 2003 ford wind star


Possible blown fuse, or bad mirror switch.

Aug 31, 2014 | Cars & Trucks

1 Answer

2006 Honda Jazz left side mirror not working won't move inwards what can be the problem?


Likely to be the actuator/motor inside that has failed. Order one off eBay that offers returns an find out how to fit it. Should be job done!
If not its likely to be a more serious electrical issue good luck with that..

Aug 14, 2012 | 2006 Honda Jazz 1.5

2 Answers

How to disconnect the motor on a driver's side mirror


Remove the drivers door panel and the connector is right there

Feb 24, 2012 | 2006 Toyota Sequoia Limited

1 Answer

On my 2008 ford F350 the driver side mirror marker lights are not working. I need to know how to repair them. Thanks


If it's just that the bulbs that have burnt out you'll need to position the exterior mirror glass inward toward the vehicle.(Note: Use caution to not trap the side lamp assembly wiring during installation, or damage to the wiring may occur.) Using a flat blade screwdriver or something similar, push the mirror side lamp assembly forward while releasing the retaining clip. Separate the bulb holders from the mirror side lamp assembly and remove the side lamp. Replace the bulbs and reassemble. I hope this helps you out.

Mar 08, 2011 | Ford F-350 Cars & Trucks

1 Answer

Why does my previa squeal when i hit 70 mph


could be wind noise, do you have a roof rack. turn the door mirror inward and try down the road, check generator belt !! good luck.

Feb 23, 2010 | 1993 Toyota Previa

1 Answer

Drivers side rear view mirror flutter in wind


If you mean the side view mirror,don't worrie it will fall off.If is the glass comming lose stop at you local auto glass place and see if they can remove and reinstall it.If its the guts then you may have to replace the entire mirror.I usualy wait till it goes flying by the wayside and have them put a new one on. You may be able to pick up the glass and glue at your local perts store as well. I hope this helped.

Jan 25, 2010 | 2001 Chevrolet Suburban

1 Answer

Mirrors won't adjust electrically.


Check that the adjustment engine is okay.

Apr 20, 2009 | 1997 Oldsmobile Regency

1 Answer

Replacing passenger side mirror on 2005 toyota corolla.


I did exactly that on my Corolla CE recently. Pop the triangular plastic shield out on the inside, remove three nuts, disengage the electric line if you see one and that's it. If you want to get more specifics look the procedure up in the Haynes repair book for Corollas 2003-2005. By the way, the mirrors on Corrollas have, as so often, been constructed by people who never drove these cars. Mirrors get hit on and there should be a joint that allows the mirrors to fold inward. The Corrolla mirrors are still; they have no joint, so when they get hit they push the metal they are mounted on inward and later on you have a poor fit after chnaging them. These American-made Corrollas are in many respect the same **** as other American-made cars.

Jan 11, 2009 | 2005 Toyota Corolla

2 Answers

Mirrors will not fold in.


It is a stuck motor. Water gives rust inside housing. Remove mirror and clean motor and components. This is a well known error for H2 mirrors.

Dec 18, 2008 | 2006 Hummer H2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...