Question about 2003 Toyota Corolla
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1995 Toyota Corolla Door Handle
It's advanced. Briefly, you'll have to take the door panel off, and then disconnect the door handle linkages, and then unbolt the door handle from the inside. You'll have to manuver around the window and window regulator and wires and swtiches. And that's after you successfully remove the door panel itself, which in itself can be quite trickly without advance tools. At this time you **** your new door handle (hopefully it's paint matched) and hook everything back up. If you'd like to tackle it, you could get more detailed info.
Posted on Feb 10, 2009
try checking the fuse box for blown fuses, if all fuses are ok, then the lightbulbs behind the dash need to be changed
Posted on Mar 31, 2009
Just pull the vents that surround the stereo, no screws there, then yo remove the front panel, starting with the knob that turns the blower on, there you'll find a hidden screw, take off the ashtray and a couple of screws on the top if I correctly remember...
from here you can continue... just remember to use a piece of paper and a pencil to draw quicly a diagram from where are you taking the screws or you'll screw... less than you took off :D
Posted on Aug 04, 2009
If you've already pulled dash apart, check actual blower motor with direct current from battery before reinstalling everything. If dash is still intact, you may be able to rule out actual blower motor failure by again applying direct power from battery (short burst will suffice) - this will require getting right down under the dash with a flashlight & wires.
Also check blower switch for power (some equipped with resistors that can blow) at all settings with a simple volt/amp meter.
Posted on Aug 05, 2009
Under normal circumstances, the drum should slide right off once the wheel is removed.
If you have built up rust holding it on, there are two threaded holes near the center of the drum to aid in removal.
Insert two 12mm bolts into the holes and, while adding plenty of lubricant, turn the bolts in even amounts until they push the drum off.
Be sure to keep them lubed, as they will strip out easily if not.
If you have aftermarket drums without the holes or the screwholes are stripped out, smacking the face of the drum with a dead blow hammer will help free it up, but takes much longer for success.
Posted on Oct 17, 2009
Tips for a great answer:
Aug 17, 2014 | 1995 Toyota Corolla
Apr 12, 2011 | 1995 Toyota Corolla
Toyota Corolla has been around long enough that many owners find
themselves needing to replace the factory stereo. Installing a new
stereo in the Toyota Corolla gives improved sound and updated
features. Swapping out the stereo in the Toyota Corolla takes basic
tools and less than an hour. This article covers models from 1990 to
the hood and remove the negative battery cable from the terminal.
Apply the parking brake and place the car
Dec 05, 2010 | 1990 Toyota Corolla
May 06, 2010 | 1995 Toyota Corolla
Nov 06, 2009 | 1995 Toyota Corolla
Sep 02, 2009 | 1995 Toyota Corolla
Jul 13, 2009 | 1989 Toyota Corolla 2 Door
May 11, 2009 | 1995 Toyota Corolla
Dec 23, 2008 | 2001 Toyota Corolla
Mar 18, 2015 | 2003 Toyota Corolla
204 people viewed this question
Usually answered in minutes!