Question about 1999 Toyota Camry

Open Question

How to remove 100 amp alternator on a 1999 toyota camry

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 48 Answers

SOURCE: Removing the 100 amp fuse link in a 1994 toyota corolla

the fuse link is bolted in from the two side in the have to un bolt the whole fusebox so you can raise it and if you look at the sides there are two side panels that can be moved down so you can get a socket or spanner on the two bolts apprx 10mm. undo them and raise the fuse out and put the new one in and tighten up the bolts again. hope this helps.

Posted on Apr 25, 2009

  • 2237 Answers

SOURCE: replace alternator belt only for 1993 toyota camry

loosen the mounting bolts on the alternator, remove the old belt, replace with the new belt, slightly tighten the top mounting bolt, pull the alternator up until the belt is tight or if there is an adjustment bolt, crank down until tight (shouldn't bow more than 1"), and tigten other hardware.

Posted on Aug 12, 2009

  • 181 Answers

SOURCE: Toyota camry 1993 battery not charging

Yes, you are right alternator is dead.

Posted on Aug 30, 2009

  • 10319 Answers

SOURCE: how do you replace the 100 amp alternator fuse in

it pulls out and the new one simply pushes in. they are just like a wall plug in your home

Posted on Feb 13, 2010

  • 151 Answers

SOURCE: need to set timing on 1999 toyota camry were should timing marks

You need to get a manual. Try the Haynes manual for your car. Try autozone; generally available for around $20. This is not the type of thing that can be covered here in enough detail to do you any good. You need a picture.

Posted on Feb 21, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace 100 amp alternator fuse in 1998 toyota camry

That's because this fuse is bolted on inside the fuse box, you'll need to remove the fuse box and turn it upside down to take the lower cover off and the electrical connectors, then you can access the 8mm bolts that connect the fuse to the main wires

Mar 06, 2014 | 1998 Toyota Camry

2 Answers

How to replace voltage regulator on 1990 Toyota camry.

Assuming the regulator is inside the alternator, as most are,
you have to remove the alternator from the car,remove the
4 long bolts that hold the 2 halves together,then remove the
screws or bolts holding the regulator

I suggest you see if the regulator is avail
You may be better to go to an auto electric shop
that does just that, & you may be able to buy the
regulator there ,or wait while they install it & test
to see if it needs replacing.

May 30, 2012 | 1990 Toyota Camry

1 Answer

We have a 2000 Solara that we just replaced the battery in, or rather, we tried, and the horn is now staying on continuously. It keeps blowing a 100 amp fuse, and does not have a key fob type alarm. The...

Why was the battery replaced? Theres no reason the the 100 amp fuse to blow unless the alternator is shorted or you hooked up the battery backwards. I think the 100 amp fuse goes to the alternator. If it was hooked up backwards then you may have engine computer damage.

Aug 25, 2011 | 2000 Toyota Camry Solara

1 Answer

My 100 A fuse on my camry is blown how do I take it out, i tried to pull it but it is not coming out

If things got hot enough to blow your 100 Amp fuse, it has probably melted plastic and metal together. Those large enclosed things in your fuse block are referred to by Toyota as "fusible links". Those things are hard to get out when they haven't melted. You will probably have to use a pair of pliers to get it out. The 100 Amp fusible link goes to your alternator. I hope you have corrected the problem that caused it to blow. Most of the time, when that fuse gets blown it is because somebody tried to jump-start a car and got the cables hooked up backwards. If this is the case, it could have done some serious damage to computer components and the alternator as well. Once you have replaced it, you need to check EVERYTHING to make sure it is all functioning properly. That bad-boy is nothing to mess with. It takes a HUGE voltage spike to blow that one!

- Good luck!


Jul 10, 2011 | 1998 Toyota Camry

2 Answers


not taped in harness it is bolted into fuseblock on outside of fuse block are 4 little locks holding in part of fuse block using small screwdriver release locks by prying outwards while pulling up on 100 amp fuse when it has released enough it will expsoe the bolts holding in the 100 amp fuse one side is an 10mm the other is a 8mm MAKE SURE YOU DISSCONECT THE BATTERY 1ST

Apr 21, 2010 | 1998 Toyota Camry

2 Answers

I arced a wire while changing my alternator on my 06 Camry, now i have no power whatsoever- what fuse or relay is the culprit

Look in the fusebox under the hood, at all of the larger 30 amp and up fuses. You probably have a blown 100 amp fuse. If it is blown, note that this fuse is BOLTED in; you cannot remove it without removing the bolts.

Sep 12, 2009 | 2006 Toyota Camry

Not finding what you are looking for?
1999 Toyota Camry Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides