Question about 1997 Chevrolet Blazer

1 Answer

Transmission slips in drive when you pull out the obd said shift a and b was failing what is the fix

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 540 Answers

Means theirs a problem with a and b shift solenoids, I have seen this many times on these have you, or anyone had the trans. pan off lately?? usually they get broken, or unplugged when the pan is removed if you don't remove the crossmember for clearance. they are located inside the pan at the rear can't miss em identical, side by side, same two wire plugs,

Posted on Sep 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999. When I reverse out of driveway then shift to move forward, why does engine fail?


Bernard's Blog: Dodge Transmission Output Speed Sensor

bernardsblog.blogspot.com/.../dodge-transmission-output-speed-sensor.h...
Sep 8, 2009 - The code was straight forward - PO720 - Output Speed Sensor Circuit.... words but if you've never seen the underside of a 1999 Dodge Ram 1500 pickup ...My 99 Dodge 2500 Ram won't accelerate..transmission is NOT ... RR - If the engine revs but the vehicle doesn't speed up then the trans is slipping.

Sep 16, 2015 | Dodge Ram 1500 Cars & Trucks

1 Answer

Where is the speed sensor located on a 2002 Chrysler Concorde


Beware speed sensors seldom fail. Chrysler products transmission have a limp mode where they only shift to second gear when something goes wrong and many times when nothing is wrong. If the speedometer fails it goes to limp. If an OBD scan gives a transmission code sometimes clearing the code will end the problem. When driving if the transmission shifts one time as it should the sensor is working.

Sep 01, 2014 | 2002 Chrysler Concorde

2 Answers

Transmission pauses before going into drive


Failed transmission

Pull it & rebuild it

Mar 01, 2014 | 1994 Lincoln Town Car

1 Answer

My wife was driving and all of the sudden the check engine, slip light and VSC came ON. The car doesn't change to the last gear O/D it drives like it is on 3D all the time. I took it to Tire Plus and the...


Possible causes of OBD code P0766
- Low transmission fluid level - Dirty transmission fluid - Faulty shift solenoid D valve - Shift solenoid D valve harness or connectors - Shift solenoid D valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0766 code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck off. I would pull the transmission pan and change the solenoid D valve

Sep 26, 2013 | 2006 Toyota RAV4

2 Answers

Truck will not exceleratein drive.It will go,it just won't excelerate


transmission either slipping lack of transmission fluid or transmission has failed.check transmission manual shift linkage.make sure manual shift linkage not disconnected or damaged.make sure manual shift adjustment correct.

Jun 17, 2013 | Cars & Trucks

1 Answer

Transmission/97/toyota/camery


I assume it is an auto by what you say. Is the O/D light blinking any codes? It is common in that model for the shift solenoids to fail, one or both, and the transmission then cannot find low gears forward.

Get a readout of trouble codes from a mobile come-to-you mechanic, or your own OBD reader, to see if that is it.

Jun 12, 2017 | 1997 Toyota Camry

1 Answer

Audi a6 2.8 quatro transmission is slipping


Good luck! If you have never rebuilt a transmission, you are going to have a tough time. First thing you need to do is get an obd scanner and see what codes are present.

Mar 04, 2017 | 1998 Audi A6

3 Answers

Automatic car won't shift from 2nd to 3rd, it just revs up


no you have a failed transmission on your hands, it is slipping.

Aug 13, 2009 | 1993 Oldsmobile Cutlass Ciera

2 Answers

Nissan maxima wont shift into park


There is a little button in front of the shifter. I pushed on this while moving the shifter back and forth. It immediately went down and I was able to put he car in park and then pulled out the key.

Jul 04, 2009 | 1993 Nissan Maxima

1 Answer

I just change the tranny becuase after driving an 1hr & Half the shift are hard ,after changing it ,it dose the same. i change the mount on it . it doesn't shift as hard but it dose the same what can...


You need to get someone to do a code-read with a transmission capable scanner (transmission shop) You probably have a bad EPC (electronic pressure control) causing the transmission to slip, therefore setting a p1811 code (max adapt/long shift) which will max out the line pressure making your shifts very firm (but stopping the slipping/delayed shifts...this is a fail safe mode designed to keep your transmission from slipping until you address the underlying cause)

Jun 10, 2009 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...