Question about Jeep Grand Cherokee

1 Answer

IT will turn over but will not start changed Ignition coil and still no luck. I need to know where the cam and crank sensor is and also where the pickup coil is located. Thank you very much.

Posted by on

  • GetMeOttaHere Sep 08, 2010

    What year and engine size? Type of Jeep?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Cam sensor is in distributor .crank sensor is on drivers side top of trasmission bell housing if it is a 1996 grand chreokee

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chevy blazer will not start. No spark!?!? No spark from the coil to ground.


Could be a bad coil, bad Ignition Control Module (what controls the ignition coil as commanded by the engine computer), or a bad crank position sensor, or cam position sensor. Or the wiring and circuits to all the ignition parts.
Often it is the crank sensor (CKP sensor)-The pcm must have this information from the crank sensor to determine spark timing. If no good signal from the crank sensor, there will be no spark.

May 29, 2017 | Cars & Trucks

2 Answers

00 Explorer 4.0 ohv v6. If cam position sensor fails will it cause, #1 engine to die at hwy speed 60mph? Also upon trying to restart, it cranks very fast, is that poss. cam sensor failure too? Thanks


No, to the second question- sensor won't make it crank any different. Faster than normal cranking often means a broken timing belt -less friction with the valve train not moving, so engine spins faster. But you have a timing chain, right? Any engine noise when it quit at 60mph? You could watch some valve action through the oil filler cap while the engine is being cranked, to make sure the timing chain is still intact.
If all is good, check for spark and gas to the engine. If stopped while running, it could be a failed fuel pump or a problem in the ignition system- cam or crank sensor, ignition coil, ignition control module, some of the things to check if no spark.

Nov 18, 2015 | Cars & Trucks

3 Answers

Need to know why won't get no spark...changed ignition module, ignition coil, cap and rotor still not firing. ....any ideas


What make vehicle ? year an model too ! Before you replaced those parts did you check for battery supply voltage an check the ground for those components ? You need to get a wiring diagram an see what get's voltage an what is ground ! An see what all is involved , crankshaft position sensor , ECM / PCM -engine computer etc...! Then you need a DVOM - digital volt ohm meter to test ! Your looking for a quick fix an doesn't work like that !

Sep 06, 2015 | Cars & Trucks

1 Answer

Ignition failure


Replace the crank sensor, crank sensor is for spark, cam sensor is for fuel. let me know how you make out.

Dec 04, 2013 | Hyundai Cars & Trucks

2 Answers

1995 ford explorer doesn't start, crank & cam sensors replaced


Does you fuel pump delivers fuel. Is it there a spark.

Dec 29, 2009 | 1995 Ford Explorer

1 Answer

94 concorde


change crank sensor? if so replace control module (ignition module)

Jul 04, 2009 | 1994 Chrysler Concorde

1 Answer

My 1987 300zx cranks but wont start.


I had the same problem last year mine turned out to be a crank sensor I don't know if that is your problem for sure mine wouldn't send any spark from the coil to the spark plug replaced crank sensor inside distributor and fired right up the dealership called it a cam sensor my book called it a crank sensor either way its in the distributor

Dec 16, 2008 | 1987 Nissan 300ZX

2 Answers

1997 dodge intrepid


check the asd relay swap it with another like it. also check fuses and old car alarm if it had one.the cam and crank sensor will not affect fuel pressure. the cam sensor should not stop this car from starting. but the crank sensor will. good luck.

Nov 23, 2008 | 1994 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...