Question about Chevrolet Citation

1 Answer

Quadrajet hose diagram??? i bought a 70 chevelle.. i has a 350 with a quadrajet carb... but it is backfireing out of the carb... only a couple of the hoses are connected, and i am not sure if they are necessary.. i have been searching for a diagram so i know where these hoses should be connected but i am not having any luck....I am not car repair man, but this i have done things on cars in the past... i know my way under the hood anyway... motor is stamped 14010287... i think this is a newer block, but the carb is older(i think).. anyway, a diagram would be excellent

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Chevrolet Master
  • 265 Answers

Hello Scott...there should be an emissions hose routing diagram under the hood or on the front header above the rad. If it is missing
the link may help you out.





1971 Chevy vacuum lines

Posted on Apr 27, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 261 Answers

SOURCE: 3T-C VACUUM HOSE DIAGRAM OR INSTRUCTIONS

USUALLY ANY TOYOTA DELER what you have to ask for is a emission routing diagram

Posted on Nov 24, 2008

  • 3 Answers

SOURCE: how to repair Eagle Talon 95 Silicone Vacuum Hose Kit

should be a hose diagram in a repair manual. most parts store have them, haynes, chiltons, etc.

Posted on Dec 31, 2008

michigan man
  • 3533 Answers

SOURCE: need picture diagram of vacuum hoses for 1987 chevy s-10 blazer

try this website to see if they have your car listed its www.autozone.com if you are not able to get it try your local library or local chevrolet dealership in the parts department

Posted on Apr 27, 2009

  • 105 Answers

SOURCE: No vacuum hose routing diagram under the hood 1987 honda accord

email me at TOSTYLEZ@LIVE.CA
I will send u it

Posted on Sep 24, 2009

pappapumpdaf
  • 635 Answers

SOURCE: need diagram of vacuum hose for 1979 chevy caprice

See if this is a match.

http://www.impalaforums.com/garage-image-3621-1255907788.jpg

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What year is this engine? and ci


From this chart - I think you may be misreading the number - 3970010 is possibly the actual number: Which makes the engine pretty old 68-72 350 V8 - 4 bolt main. I included past this number so that you can see that the number you posted doesn't actually exist. And thus my conclusion that the 9 is most likely a 0. Hope this helps. 3970010 350 69 Corvette late 69,4 bolt main 3970010 302 69 Camaro Z/28,Late 69, 4 bolt main 3970010 350 69-79 Truck 2&4 bolt main 3970010 350 69-79 Pass,Chevelle,Camaro,Nova,MonteCarlo 2&4 bolt main 3970010 350 70 Corvette 300,350,370 HP 4 bolt main 3970010 350 71 Corvette 270,330 HP 4 bolt main 3970010 350 72 Corvette 200,255 HP 4 bolt main 3970014 350 69-77 Pass,Chevelle,Camaro, Nova,MonteCarlo 2 or 4 bolt main 3970014 350 69-79 Truck 2 or 4 bolt main 3970014 350 72 Corvette late &undefined;72,200 HP,255HP 4 bolt main 3970020 307 68-73 Pass,Chevelle,Camro, Nova 3970020 307 69-73 Truck 3970024 307 69-73 Pass,Chevelle,Camro, Nova,Truck 3992386 327 68-69 Pass,Chevelle,Camro, Nova,Truck Large Jounal

Oct 13, 2014 | Cars & Trucks

1 Answer

Where do the hoses connect to on 4 bbl rochester carburetor, it has no hoses attached, on my 79 350 motor


1979 chevy C1500
the vacuum setup varies,
by (california, Federal (USA) and export models)
where are you, or if in USA the under hood sticker shows if calif.or not.

if in usa, use the FSM (buy one used) or use alldata.com
on USA cars , (not sure starting year, this one is old) the vacuum
map is on the underside of the hood. (not not painted over,etc)

Jul 01, 2014 | 1978 Chevrolet C1500

1 Answer

Choke ligt on at idle 1986 chevy w/ quadrajet carb


sounds like the float is sticking or may have a hole in it, you can try adding some automatic transmission fluid to the gas - sometimes works if it sticking,check for a vaccume leak - but usually won't overfuel with a leak- but has happend.

Apr 20, 2014 | 1989 Chevrolet C/K 2500

1 Answer

1985 chevy c20 vacuum problems


on this truck the vacuum is pretty basic, im guessing you have a 305 (5.0) or a 350 (5.7), on the front of the engine compartment near the fan shroud somewhere (if it is still intact) you should have a diagram of all the vac lines
you probably have a quadrajet carb, if you are mechanical and patient they are not hard to rebuild

blowing out the carb with carb and choke cleaner isnt a bad idea either, have someone keep it running and slowly run like 1/4 to 1/2 a can down the carb spraying all around

Jan 31, 2013 | 1985 Chevrolet Chevy

1 Answer

Best replacement carb for 1980 vette , simple is the key word


Best simple replacement carb for your Vette would be to have the stock Quadrajet rebuilt by an ols pro...when built right these carbs of 780 cfm are powerful and reliably consistent...be sure to keep the electric choke...A bolt on replacement that I have used is the Carter Thermoquad...while this carb permits easy adjustments, the secondaries are not as large as the Quadrajet...therfore the kick down response is not as powerful as the Q-jet...Yes, the primaries are larger but the 625 CFM again limits the response on your LT-1 350...Hope this helps.

Mar 24, 2011 | 1980 Chevrolet Corvette

1 Answer

ROCHESTER QUADRAJET


Check with some of your local shops that rebuild carbs, they can probably set you up with one. A new one will have to come from GM likely. You have the best idea in going to a junkyard and cannabilizing, I think. Hope this helps.

Jan 13, 2010 | 1991 Chevrolet S-10 Blazer

2 Answers

I just bought a 77 chevy motorhome with a 454 in it. it idled great, drove great at first, even when hot. took it out and opened it up, and then died. now it wont idle. timing?


almost sounds more in the carburator. if this motorhome sat for a long period of time, when you opened it up, it increased the fuel flow in the bowl of the carb, therefor may have stirred up dirt and varnish. id check there first. if it has a holley on it, if it "coughed" or backfired through the carb when you "opened" it up, it more then likely blew the power valve out

Aug 03, 2009 | 1986 Chevrolet K1500

1 Answer

Need a diagram 87 chevy


I know from Experience on Rebuilding my Chevelle www.PainlessWiring.com has everything that you need for this Conversion.

Jan 04, 2009 | 1988 Chevrolet K1500

1 Answer

Truck stalls when the ride gets rough


are you running factory quadrajet carb?
you can adjust float but have to take apart carb to do so on it.

Dec 02, 2008 | 1983 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...