Question about Fiat 124

1 Answer

Hi, I am driving a Fiat Sciento 1000, year 2000 - I am struggling at times getting into gear from 1st to 2nd especially, and sometimes end up hazards on until i've got into gear ok.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,489 Answers

If the clutch feels strong and it is only happening on 1 or 2 gears, this is likely going to be caused by worn synchros in the transmission. What these items are, little brass rings, shaped like gears themselves that go on the gear shafts and help to align the gear so the shift fork can easily push the other gear into place. If these are worn or broken, you get gears that do not align and grind when use is needed. The transmission will need to be removed and taken apart to determine how much damage is there. This is not a rebuild, but do let an expert give you his opinion about what NEEDS to be done while it is on the bench. Let me know if you need anything else. Unfortunately, I do not have a shop manual for this particular model.

Posted on Sep 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Grand Cherokee began shifting hard. Sometimes feels like long time to get into 2nd gear. When coming to stop, seems to shift into 1st gear suddenly, like skipping over 3rd and 2nd gears on downshift.


You don't say what year model. Could be vacuum leak, or perhaps trans filter and fluid needs to be changed. If this doen't help, might be time for trans shop testing.

Jun 24, 2015 | Cars & Trucks

1 Answer

My fiat sciento (y.o.m.2000 1100cc) is developing a slight miss when i depress the accelator occasionally.


run the fault codes and check for fuel pressure and HT leads /plug coils problem

Jan 20, 2015 | Fiat Cars & Trucks

1 Answer

Fiat Sedici 2008 petrol sometimes wont go into 1st or 2nd gear going off halt signs


iam assuming this is a manual as americans wouldnt be seen dead in such a small europeon car ,doesnt do their street cred any good driving a **** looking italian car like this ,anyway check the gearbox gear oil level if possible and then if ok change the clutch ,numerous faults in this area but they all entail changing the clutch

Mar 19, 2012 | 2008 Suzuki SX4

1 Answer

My '99 VW bug doesn't catch 2nd gear sometimes


the gear changing selectors are faulty and needing inspecting for damage ,gear box removal job

Jul 10, 2010 | 1999 Volkswagen Beetle

1 Answer

I have a 2000 GMC sierra 2500 truck. The guy I bought it from had a new transmition put in it. After driving a while I noticed that the tranny wouldn't shift into low gears 1st & 2nd on comand. and...


-----check possible tps [throttle position sensor ]circuit for damage or faulty sensor----if good check the fuses and trans harness for shorts damage or disconnection,check o2 sensors wiring possible ground to exhaust ,or internal leak 2nd gear apply circuit[servo assembly or 1-2 accumulator] or poor pump pressure

Feb 13, 2010 | 2000 GMC Sierra

1 Answer

Sometimes my M Eclipse won't go into gear


you have worn out teeth on your transmission or you need a new clutch disc.

Apr 04, 2009 | 2000 Mitsubishi Eclipse

1 Answer

When I put car into drive gear takes off real


The Catera is designed to heat the automatic transmission fluid when cold by extending the time the car stays in first gear. This is by design and not a defect.

Mar 30, 2009 | 2000 Cadillac Catera

1 Answer

Honda auto gearbox problem


worn shift fork. shifts linkage could be binding.

Mar 29, 2009 | 2000 Honda Accord

1 Answer

2000 mazda bogging in all gears especially in 1st and 2nd gears ?


Judging from what i know, the timing on the engine is probably a bit off, and i remember reading the exact same problem on another web site and that is also what they said. So just check the timing on the engine or have it checked by a mechanic if you don't know how to do it.

Feb 07, 2009 | 2000 Mazda Protege

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...