Question about 2004 Dodge Caravan

Open Question

Where is the bank 1 o2 sensor located on a 2004 dodge grand caravan with the 3.8L engine? I have a code P0132, which indicates a problem with the bank 1 O2 sensor. I replaced an O2 sensor this past summer so I guess it is a different one. Also, a battery charger was hooked up to my van before the check engine light came on; could that have anything to do with this code or problem? Thanks!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

thutson66
  • 96 Answers

SOURCE: O2 sensor and EVAP issues

P0446 is Aux Emission Control
P0132 Fuel Air Metering

The Evap Canister is located in the fender well, if I am not mistaken and the B1S2 is the O2 sensor is the second O2 sensor on the left side of the engine if your looking at it from the front of the motor.

Posted on Aug 23, 2008

johnny5846
  • 379 Answers

SOURCE: location of a o2 sensor 2001 nissan maxima

bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .

http://www.autozone.com/N,26200242/shopping/specsSelect.htm



Posted on Jan 04, 2009

ewashmidas
  • 362 Answers

SOURCE: o2 sensor bank 2 sensor 2

Bank 2 will the the passenger side or right side and sensor 2 is the O2 sensor behind the catalytic converter.

Posted on Jan 28, 2009

warlock61
  • 659 Answers

SOURCE: more 99 cougar problems

there is a fuse for the o2 heaters if one of the sensors blew the fuse they will all be out

Posted on Mar 01, 2009

  • 55 Answers

SOURCE: location of bank 1 sensor 1 o2 sensor

Should be in the manifold on the back side closest to the firewall.

Posted on May 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After fill ups, engine light indicates deffective 02 sensor bank1. On a '04, Dodge Grand Caravan, 3.8.


You must have duel exhast then. Bank 1 is the drivers side and you have a upper and lower o2 sensor. More than likely it is the upper o2 sensor that is the problem.

Aug 12, 2012 | 2004 Dodge Caravan

1 Answer

Codes p0132 service engine soon light on


P0132 FORD - O2 Sensor Circuit High Voltage Bank 1 Sensor 1Possible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

Jun 29, 2012 | 2004 Ford F150

2 Answers

What's your problem?service engine soon light on code P0132,P2195, P2196


P0132 FORD - O2 Sensor Circuit High Voltage Bank 1 Sensor 1xicon.jpghttp://engine-codes.com/p0132_ford.htmlForum CodePossible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
P2195 - O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1

P2196 - O2 Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1

Jun 29, 2012 | Ford Cars & Trucks

1 Answer

What does Code P 0132 mean


Hi there:
DTC P0132 - O2 Oxygen Sensor Circuit High Voltage (Bank1, Sensor1)
This involves the front oxygen sensor on Bank 1. This code indicates that the heated oxygen sensor reading is too high. In the case of Ford vehicles, that indicates the voltage at the sensor is over 1.5 volts. Other vehicles may be similar. You will likely not notice any drivability problems.

A code P0132 may mean that one or more of the following has happened:
The oxygen sensor heater circuit is shorted out
The wiring to the sensor is broken / frayed (less likely)

Possible Solutions: the simplest thing to do is to reset the code and see if it comes back.

If the code comes back, the problem is more than likely the front Bank 1 oxygen sensor. You will likely wind up replacing it but you should also consider these possible solutions:
Check for wiring problems (shorted, frayed wires)
Check the voltage of the oxygen sensor
Replace O2 sensor (Bank 1 Sensor 1 is located on the driver's side)

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 29, 2012 | 1992 Dodge Dakota

1 Answer

Check engine light is on and it shows code P0032 on 2004 Dodge Grand Caravan 3.8 I think that is something on the O@ sensor, Can anyone point out where and how and if I have more than one O2...


P0032 - Oxygen (A/F) Sensor Heater Control Circuit High (Bank 1 Sensor 1)
A P0032 DTC (diagnostic trouble code) refers to the O2 sensor (oxygen sensor) located on Bank 1 in front of the catalytic converter. There is also an oxygen sensor behind the converter which is Sensor #2.

This O2 sensor #1 may also be refered to as an air/fuel ratio sensor since on some vehicles it is. The sensor detects the amount of oxygen in the exhaust gas compared to the outside air and then vehicle's computer adjusts the air/fuel ratio going into the engine. The sensor is less effective when the exhaust gas temperature is low, so it includes a heater which is activated to help get better readings from the O2 sensor. Essentially this P0032 code means that the resistance of the heater circuit is higher than normal. In some cases, that resistance level must be higher than 10 A to trigger the DTC code.

Note, this code is very similar in nature to P0031, P0051, and P0052

Most likely you'll not notice any symptoms other than the MIL (malfunction indicator lamp, a.k.a. the check engine light) will illuminate.

A P0032 DTC trouble code may be caused by one or more of the following:
A short in the heater circuit in the sensor
A failed O2 sensor heater
Wiring/connectors broken/frayed leading to sensor and/or relay
Failed PCM/ECM


I hope this helps, abd just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment. Have a nice weekend and thanks for using FixYa.

Jose.

Oct 16, 2011 | 2004 Dodge Grand Caravan

3 Answers

2002 dodge caravan engine light on code showing p0135 .please advice.thanks.


  • O2 Sensor Heater Circuit Malfunction - Bank 1 - Sensor 1
  • Basically the ECM Electronic Control Unit has determined your O2 sensor is taking to long to begin reacting properly.
  • The causes could be
  1. O2 heater element resistance could be to high.
  2. An internal short or opening in the heater element.
  3. O2 heater circuit wiring with high resistance.
  4. Open or short to ground in the wiring harness.

  • The fixes are
  1. Check the harness and connector to the O2 sensor for shorts or ground.
  2. Replace that O2 sensor.

  • Bank 1 sensor 1 location for this vehicle is located on the exhaust manifold back by the firewall on top of the manifold..
  • Thank you for using FixYa


Regards, Tony

Jun 19, 2011 | 2002 Dodge Grand Caravan

2 Answers

I have a 2004 Dodge Grand Caravan with a 3.8 and recently replaced the upstream O2 sensor and now get a p0135 engine code. What is the problem? I used a Bosch sensor. I was able to clear out the code but...


rule of thumb on any vehicle. always use the factory sensors for anything. they just are made for your vehicles computer. hint...buy them online and shop around for best price.

Aug 26, 2017 | 2002 Dodge Grand Caravan

2 Answers

Error code p0032 on 2004 dodge caravan. what is the code?


Hi.

P0032 means HO2S Heater Control Circuit High (Bank 1 Sensor 1).

It means high impedance from O2 sensor, check wiring to sensor and replace the sensor.
Check O2 sensor located in bank 1 (cylinder 1 side- see here), and after the catalitic converter (there is also an O2 sensor before cat converter).

Jul 31, 2010 | 2004 Dodge Caravan

2 Answers

2004 Dodge Grand Caravan OBD2 code P2097..What is this?


  1. bank 1 sensor 2 oxygen sensor. closest to the firewall exhaust pipe aft the the catalytic converter

Apr 14, 2010 | 2004 Dodge Caravan

Not finding what you are looking for?
2004 Dodge Caravan Logo

Related Topics:

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...