Question about 2005 Jeep Liberty

1 Answer

2005 jeep liberty 2.8 diesel rocker arms broken after timing belt change.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 221 Answers

Did you pay to have this done? If so, haul it back in there and get a lawyer if needed. If you did it, whoops! Timing is wrong.

Posted on Sep 08, 2010

Testimonial: "Thanks for the help. I am having a lot of trouble with the shop that worked on it."

  • Tom Sep 09, 2010

    I hate when shops break something and then won't admit it. How long after change did the rocker arm break?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seat belt light stays on


Chances are that the wire that leads up to the latch of the seatbelt was pulled off by the vacuum cleaner nozzle. Have a look around the floor by the arm that holds the latch side of the belt for a loose or broken wire.

_______________
cummins diagnostic

Feb 01, 2013 | 2005 Jeep Liberty

1 Answer

2002 Jeep Liberty Limited 3.7 has hard time starting then runs rough and wont stay started


check rocker arms and lifters sometimes lifters get stuck until they fill with oil. partially collasped lifter may need cleaned .

Mar 25, 2012 | 2002 Jeep Liberty

1 Answer

03 jeep liberty 3.7 liter v6 the rocker arm keeps coming off and it has an overhead cam wondering what all could be the problem


most likely (as seen in my experience), the valves become slightly bent & they don't travel properly within the valve guide, causing the valves to stick open. It will almost appear to be a broken valve spring. I've seen a handful with this problem. The valve sticks open & the cam lobe doesn't even touch the rocker arm, thus "tossing" the rocker out of position.

Dec 28, 2010 | Jeep Liberty Cars & Trucks

1 Answer

I have as 2005 jeep liberty and need to know what all I need to do a complete tune up on this vehicle. My jeep is a turbo diesel engine


plugs, boots, oil,oil filter ,fuel filter,air filter check rest of flid levels an belt or belts good luck

Dec 20, 2010 | 2005 Jeep Liberty

1 Answer

2005 dodge dakota has a rattle for 5 seconds at


Sounds like a rocker arm is out of adjustment or one of the rocker arms are worn more than the rest. If you find one loose rocker arm and the rest are tight then the entire rocker assembly will need to be removed and the one rocker arm will have to be replaced. Thats on a V6 and V8 models . Now on the four cylinder you have to remove the timing belt cover,unbolt the timing belt and hold tension on it to keep the belt from jumping off the crankshaft gear. Remove the rocker arm cover and you will have to remove the cam to get to the roller rocker arms. There is alot of work to do to get this job done. If you do not have all the tools to do this with, then it would be better to take the truck to a mechanics shop for repairs. Hope this will help you.

May 27, 2010 | 2005 Dodge Dakota

2 Answers

Rocker arm come out on jeep chrysler 3.7 eng


A rocker arm is the arm that sits on top of the valve stem and connects to the push rods 'the push rods sit on the cam so when engine is running, the push rods go up and down in a timed sequence and with the rocker arms, open and close the inlet and exhaust valves. the rocker arm is located inside the valve(rocker)cover .If the rocker arm gets loose or comes out.
Check the nuts on the shaft which holds the rocker arms.either the shaft or nuts are got loose.They need to be tightened.Don't make it too tight or too loose.  Too tight,and they don't flutter right. Too loose,and they allow the rocker arms to wiggle out of whack. Other possibility can be  something is broken, bent, collapsed, or out of adjustment. 
Thanks. you can rate this solution and show your appreciation.



May 20, 2010 | 2002 Jeep Liberty

1 Answer

I have an 2002 Jeep Liberty that keeps throwing rocker arms. Has anyone else had this problem? We have replaced lifters, rocker arms and valve springs any ideas? This always happens on cold start up


yeah it needs a new cylinder I see this all the time. The valve stem guide in the head drops and sticks the valve open the rocker and cam lose tension and thats why the rocker keeps breaking. Take the valve cover off the head that your have problems with. remove the rocker put a socket over the valve spring. gently tap the spring down without loosening the keepers. You will notice that the valve will not return to the closed position. I garuntee this is the problem u r have I hate to give u the bad news.

Nov 05, 2009 | 2002 Jeep Liberty

1 Answer

2005 jeep liberty with 2.8lt diesl engine.


THE CRD DIESEL 2.8 LITER ENGINE WHICH IS MADE IN ITALY HAS A TIMING BELT.

Jul 24, 2009 | 2005 Jeep Liberty

1 Answer

Engine has no compression


when the timing belt broke it also bent the valves,hence the broken rocker arm. pull the head and see the valves are bent

Apr 09, 2009 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2005 Jeep Liberty Logo

Related Topics:

904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...