Question about 2003 Mitsubishi Lancer

1 Answer

My son steering column of his 2003 lancer sits nin his lap

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

More information is needed but... if its sits in his lap either the tilt steering is adjusted that way or the hardware to secure the steering colunm has come loose getif this is the case take it to a dealership and have it fixed as if there is an airbag in the steering wheel it could detonate while trying to put everything back together.
good luck!

Posted on Sep 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why would srs light stay on in my mitsubishi lancer 2003 model


A common reason is that the clock spring assembly in the steering wheel has failed. Next reason is the SRS computer has a problem.

Feb 20, 2015 | 2003 Mitsubishi Lancer

2 Answers

How to remove the ignition lock cylinder from a 93 geo storm


is the lock assembly in the car or out?
there are 2 jobs here, removing the assembly
and after that, attacking the lock it self.???????

any lock smith can rebuild the lock, proper
it has pins that are pressed out.
it can even be rekeyed.

the remove assembly is covered in the FSM, no books?
alldata.com covers that.
it really is an Isuzu. impulse.

my guess is its job 1, assembly out.
so toss coin lands on job1
(on most cars, steering wheel must be removed)
once that is done, its obvious from there, right? that clamp there with the antitamper screws? then must be removed. and replaced new..

a rare car , and even more one that runs....

here is the online FSM answer

  1. Remove the negative battery cable.
  2. Remove the steering wheel.
  3. Remove the combination switch assembly.
  4. Turn the key to the OFFposition, depress the retaining pin and remove the ignition lock cylinder from the switch.
  5. Disconnect the electrical connector from the ignition switch.
  6. Remove the snapring and spacer collar from the steering shaft.
  7. Disconnect the back drive cable from the ignition switch.
  8. Remove the ignition switch bolts and the ignition switch from the steering column.


now back in?
  1. Install the ignition switch to the steering column and tighten the bolts.
  2. Connect the back drive cable to the ignition switch.
  3. Install the spacer collar and the snapring to the steering shaft.
  4. Connect the electrical connector to the ignition switch.
  5. Install the lock cylinder into the switch.
  6. Install the turn signal switch screws and the turn signal switch.
  7. Install the four screws and the coil assembly to the turn signal switch.
  8. Connect the coil assembly wiring harness to the turn signal switch.
  9. Install the two piece steering column cover and the two piece steering column cover screws.
  10. Raise the steering column and install the upper steering column mounting bolts. Tighten the bolts to 18 ft. lbs. (24 Nm).
  11. Install the left lower dash trim panel and tighten the lower dash trim panel screws.
  12. Install the lap air deflector and tighten the lap air deflector screws.
  13. Install the knee pad assembly and tighten the five screws, the bolt and the nut attaching the assembly.
  14. Install the engine hood opener cable.
  15. Install the engine hood opener and tighten the two screws.
  16. Connect the electrical connector to the cigar lighter bezel and install the bezel.
  17. Connect the electrical connector to the left switch bezel and install the bezel.
  18. Install the steering wheel.
  19. Connect the negative battery terminal to the battery.

that?

Oct 08, 2014 | 1993 Geo Storm

1 Answer

Where is the location of dlc for lancer 2004


You will find the Data Link Connector (DLC) for a 2003 Lancer, below the steering column to the left.

Jun 16, 2014 | 2003 Mitsubishi Lancer

3 Answers

Horn honking when car is turned off


have to remove airbag to fix this

Aug 16, 2012 | 2003 Mitsubishi Lancer

1 Answer

No turn sig or flashers 2002 mitsubishi lancer ls


Verify the fuse is good. If it is good then check turn signal switch in steering column.

Oct 28, 2011 | 2002 Mitsubishi Lancer

1 Answer

I cant find the diagnostic port on a 2002 mitsubishi lancer oz rally


It will be on Either the Right or Left Side of the Steering Column Under the Dash. Also, Some of the OBD Outlets were Under the Hood Mounted Near the Firewall. Please Rate My Response! Thanks!

Feb 02, 2009 | 2002 Mitsubishi Lancer

1 Answer

Key won't come out of ignition locked in, won't turn all the way off.


there's a plastic cover on the bottom of your steering column facing your lap as you sit in the seat. pop it off. put your thumb in the hole and poke upward toward the dash until you feel a button. hold it in and the key comes out.

Aug 03, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...