Question about Cadillac SRX

1 Answer

The rear power seat doesn't work. When you push the button it just clicks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 127 Answers

Hi, if the relay clicks, one side of the relay is working, the coil side. and the battery side (switch) of the relay is not working. NO BATTERY FEED

relays work by a switch on the dash and wirired to relay coil then other side of relay coil is grounded to body this is one part of the circuit (small wiries).

BATTERY FEED go's to CONNTACT SIDE OF RELAY. other side of relay go's to seat motor and then the motor ground to body (HEAVY WIRES) THIS PART OF THE RELAY IS THE HEAVY SWITCH. these relays allow heavy current to be controlled be a small switch and small wire size. it brobly a fuse or a (seat motor sticking) or both. gerry

Posted on Sep 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008hyundai veracruz rear hatch wont open


if it clicks when pushing button the lock is disengaging try providing a little pressure on door and have someone push the button it will probably spring open. the struts might not have enough power to pop it open

Aug 12, 2014 | Cars & Trucks

1 Answer

Heated rear seats


Check the 20 A REAR SEAT FUSE in the instrument panel fuse block. The fuse supplies power to the rear heated seat module which may have failed. A serial data line is connected to the rear seat audio (RSA) panel to send switch setting information to the rear heated seat module and turn on the appropriate LED(s).

Dec 09, 2013 | Chevrolet Suburban Cars & Trucks

1 Answer

Rear wiper doesn't work


check rear wiper fuse and relay.if wiper motor getting power but do not work.rear wiper motor bad.if fuse and relay okay but no power going to rear wiper rear wiper switch could be bad.

May 14, 2013 | 2000 Seat Ibiza

1 Answer

DRIVER POWER SEAT LUMBAR BUTTON STUCK. SEAT DOESN'T MOVE


Remove the button & resolve that part of the issue,
so it either works or if tests bad-- replace it

Dec 07, 2012 | 2010 Chevrolet Silverado 1500

1 Answer

Rear sunshade button doesn't work on Chrysler 300


I have same issue, the shade work with the touch screen from radio but the rear button on the back between the heated seat button dont work. please help if you know, i have a 2013 300s v6.
thanks

May 02, 2012 | Chrysler 300C Cars & Trucks

2 Answers

My trunk won't open, I have tried my trunk button and the key won't work, it worked fine a few hours, but even when i try to do it manually it won't open. Also I would look in and try the...


There are 3 phases to fixing your car's trunk lid release problem.

Phase 1: First check the fuse - once you know that's OK, then proceed to phase 2 (below).
The fuse for the trunk lock is
the bcm (pwr) 15A fuse in the instrument panel fuse box (behind panel at drivers right foot)

Check that fuse, as it is the power supply for the button on the dash that sends power to the actuator in the trunk.

Phase 2: Get the trunk open (without taking it to the dealership).
If you have remote keyless entry to the trunk, you could try that - but with the actuator
dead/dying, it shouldn't work.

Here are a couple of ideas to try to enter trunk while (a) actuator isn't working, and (b) all
valet lockout features (designed to deny valets access to the trunk) are in the "Lock" position:

There is the lock cylinder, which you stated is not functioning - put the key in, and it doesn't
turn. Just to be sure, consider: lubricate key with Graphite lock-type lubricant, and retry.

The trunk has 2 valet safetys...the locking rear seats which require access to the trunk to unlock, and then there is a valet switch in the trunk that locks the button on the dash from working to keep valet parking attendants out of the trunk. That may be in the lock position.

You can try accessing the center area of the fold down rear seat and see if you can unhinge the rear seat from there. Maybe reach in with your hand, or an extension-type tool.

there may be a way to fold the hinge away from the seat back so it can be removed from the hinge and give you access to the safety latch in the trunk and open it that way (white handle in trunk).
The white-handled safety latch release is desiged to prevent accidentally trapping children, and
if you can pull it with your extending-type or grasping-type tool, the trunk will open whether or
not the actuator motor is working.

Phase 3: Replace the Problem part.

Your failed part may be either (1) Trunk Release Relay, or (2) Trunk Lock Release Switch

My Satrun ION manual doesn't cover either of these parts, and the online parts houses, e.g.
http://www.rockauto.com/catalog/x,carcode,1431624,pgname,Electrical-Switch%2B%2526%252338%253B%2BRelay,a,search.yahoo.com%2BSearch%2Bfor%2B2004%2BSATURN
fail to provide instructions. One of those times a mechanic has to t=rely on his/her native
handiness and/or experience.
To identify which of these parts is bad, locae the Trunk Release Relay (call your dealer parts
dept. for helpful tips on finding it), then operate the dashboard trunk release button with your
ear close tothe relay - if it makes a noise, the problem is the Trunk Lock Release Switch in
the trunk lid, otherwise its the relay.

Aug 15, 2011 | 2004 Saturn ION

1 Answer

I pulled the seat all the way forward on my 1990 Mercedes 420 see and it will not go back. When I push the seat back button I hear a faint click but no movement. My passenger seat doesn't make a noise...


use the buttons to move it back but shake the seat side to side. sounds like your track on the seat has gotten in a bind with the one on the floor. just wiggle and jiggle till it starts to move and dont go all the way forward in the future

Jun 13, 2011 | 1991 Mercedes-Benz 420

1 Answer

Ford explorer Power seat will not move


Check the voltage from the cpu,if there is none,replace the cpu again.Hold seat to foward for 12 seconds then release,wait 20 seconds,see if it will reset.If not replace the cpu

Apr 04, 2010 | Ford Explorer Cars & Trucks

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...