Question about 1987 Chevrolet Monte Carlo
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hey , just take the positive wire from the coil you are removing and feed it to the + terminal on the HEI dist. cap.the other terminal under there is for your tachometer. If you are mounting a master kill switch in the bumper for drag racing- attatch the kill wire to the tach terminal also.
Thats it you just plug the three wire pigtail from the dist. base(pickup) to the cap and you are off.
Remember firing order is 18436572 in a clockwise direction. to find #1 remove #1 plug and have someone"bump" the engine over while holding your finger over the hole-carefull. then line up the slotted mark on the crank pulley with the big notch on the timing indicator. Good luck
Posted on Aug 31, 2008
on the driver side of the distributor is where your blot is it should be a nine sixteenths there is a special wrench you should use if you can. it makes it easier. that is all you need to loosen
Posted on Mar 04, 2009
Tips for a great answer:
Apr 24, 2016 | Cadillac Cars & Trucks
Dec 29, 2015 | Cars & Trucks
Sep 29, 2015 | Ford F-250 Cars & Trucks
Jun 20, 2010 | 1998 Toyota Land Cruiser
Sep 12, 2009 | 1998 Pontiac Trans
May 18, 2009 | 1999 Dodge Dakota
Apr 09, 2009 | 2000 Dodge Ram 1500 Truck
Jan 04, 2016 | 1987 Chevrolet Monte Carlo
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: