Question about Jeep Wrangler

1 Answer

Need to replace starter bolts with new one need to know size of bolt

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 385 Answers

The best and easiest way which will also get you the right ones at the right length is to buy them (by year and model and engine) from a salvage yard.

Posted on Sep 08, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

85 Peugeot 505 Automatic Standard I need to replace the bolts that mount the starter to the transmission. However I don't have the previous bolts. Anyone know the specs on these bolts? Thanks

Does the starter have a threaded end? Meaning, do the nuts tighten themselves into the starter or does a nut and washer fasten it to the transmission? Regardless...I can assure you the nuts are a metric size....likely a 13mm head.

Dec 03, 2013 | Cars & Trucks

1 Answer

Starter Bolt Size

you can buy them at autozone,they may even know what size you need. usually starter bolts are the same size and in some cases just the length is different. simply try the one you have in the other hole and if it works then problem solved on the size but the length may still be different.

Aug 12, 2012 | 1993 Dodge Dakota

1 Answer

Starter will not stay tight, chevy 350

It sounds like the bolt holes may be stripped. Try and put the bolts in without the starter use new bolts and try to pull them out by hand. If you can not it is possible they may be only partly stripped and need the threads cleaned up. Make sure you use the proper size tap. If you still have problems you may need to drill out the bad bolt hole or holes one size larger and re-tap the holes one size larger. This is a big job and you will need larger bolts as well. Depending on the room you have to work with you may have to pull the engine to do a good job. good luck.

Jul 18, 2012 | Cars & Trucks

1 Answer

How to replace a starter on a 1996 mercury grand marquis

remove the positive and neg battery connections at the battery , ( not knowing what size motor your car has, ) fords have either a 2 or 3 bolt starter,, Located under the motor ( if you can't locate it, follow the positive battery cable down, It leads right to it ,, un-bolt the cable connections to it,, and then remove the bolts that hold the starter in place,, reverse this procedure to put the new one back in, you can look at this video to see how,,

May 24, 2011 | Mercury Grand Marquis Cars & Trucks

1 Answer

Would like to know what size the starter bolts are on a 92 olds 98.

are you asking for the socket size to remove the bolts,if so it takes a 9/16"socket.if you are asking to get bolts to replace them then these are a specific size and strength of bolt.if you don`t want to buy new then go to the wrecking yard and get them.i believe they are two different lengths.

Apr 01, 2011 | 1992 Oldsmobile Ninety Eight

1 Answer

Replaced starter in 99 cadillac escalade. One of the mounting screws is missing, I need to purchase a new one. WHAT SIZE do I need, dont want to take the starter out again just to have a screw size, but I...

no doubt the bolts are all the same. take a bolt back out and take that bolt to a parts store and they will sell you a match. or wait and go to a dealer.

Oct 03, 2010 | 1999 Cadillac Escalade

1 Answer

Vertical starter bolt vibrated its way out - need to know size and length of bolt to replace

this is a very special type of bolt, u must get it from the dealer, any GM dealer will have it or can get it quickly.

Apr 21, 2010 | 1992 Chevrolet S-10

2 Answers

Replace the starter on a 95sn mustang convertable

There are two bolts holding the factory starter/reducer onto the 5.0 block. The bottom bolt should be easily accessible from underneath while up on ramps/stands but the top bolt must be reached by feeding several long extensions through the front of the motor (by the pulleys) onto the top bolt. If you look down the passenger side by the header you will see the top bolt. You will have to take the intake piping off as well.

Mar 19, 2009 | 1995 Ford Mustang

2 Answers

Ford F 150

well you picked one of the easy ones all you have is a couple of mounting bolts (depending on what engine you have) and one battery cable . just pull the bolts out and remove the starter. some times you need a pry bar to break it loose but make sue you have the bolts removed first.
good luck

Oct 18, 2008 | 1992 Ford F150 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides